The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Building energy metering and environmental monitoring – A state-of-the-art review and directions for future research
Open accessAbstract
Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy consumption and associated greenhouse gas emissions from buildings has acted as a catalyst in the increasing installation of meters and sensors for monitoring energy use and indoor environmental conditions in buildings. This paper reviews the state-of-the-art in building energy metering and environmental monitoring, including their social, economic, environmental and legislative drivers. The integration of meters and sensors with existing building energy management systems (BEMS) is critically appraised, especially with regard to communication technologies and protocols such as ModBus, M-Bus, Ethernet, Cellular, ZigBee, WiFi and BACnet. Findings suggest that energy metering is covered in existing policies and regulations in only a handful of countries. Most of the legislations and policies on energy metering in Europe are in response to the Energy Performance of Buildings Directive (EPBD), 2002/91/EC. However, recent developments in policy are pointing towards more stringent metering requirements in future, moving away from voluntary to mandatory compliance. With regards to metering equipment, significant developments have been made in the recent past on miniaturisation, accuracy, robustness, data storage, ability to connect using multiple communication protocols, and the integration with BEMS and the Cloud – resulting in a range of available solutions, selection of which can be challenging. Developments in communication technologies, in particular in low-power wireless such as ZigBee and Bluetooth LE (BLE), are enabling cost-effective machine to machine (M2M) and internet of things (IoT) implementation of sensor networks. Privacy and data protection, however, remain a concern for data aggregators and end-users. The standardization of network protocols and device functionalities remains an active area of research and development, especially due to the prevalence of many protocols in the BEMS industry. Available solutions often lack interoperability between hardware and software systems, resulting in vendor lock-in. The paper provides a comprehensive understanding of available technologies for energy metering and environmental monitoring; their drivers, advantages and limitations; factors affecting their selection and future directions of research and development – for use a reference, as well as for generating further interest in this expanding research area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal comfort: Analysis and applications in environmental engineering
(1972) · Applied Ergonomics · doi:10.1016/s0003-6870(72)80074-7 · Cited by 4,451
Demand side management: benefits and challenges
Strbac, G. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.09.030 · Cited by 1,702
A Survey on Smart Grid Communication Infrastructures: Motivations, Requirements and Challenges
Yan, Y., Qian, Y., Sharif, H., & Tipper, D. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.021312.00034 · Cited by 1,315
Cyber–Physical Security of a Smart Grid Infrastructure
Mo, Y., Kim, T. H.-J., Brancik, K., Dickinson, D., Lee, H., Perrig, A., & Sinopoli, B. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2161428 · Cited by 1,096
(2004) · Springer eBooks · doi:10.1007/b97321 · Cited by 1,028
Review of temperature measurement
Childs, P., Greenwood, J. R., & Long, C. A. (2000) · Review of Scientific Instruments · doi:10.1063/1.1305516 · Cited by 980
Awbi, H. B. (2002) · Routledge eBooks · doi:10.4324/9780203476307 · Cited by 900
Shaikh, P. H., Nor, N. B. M., Nallagownden, P., Elamvazuthi, I., & Ibrahim, T. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.027 · Cited by 866
Ceramic sensors for humidity detection: the state-of-the-art and future developments
Traversa, E. (1995) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(94)01268-m · Cited by 848
Cited by
A review on buildings energy information: Trends, end-uses, fuels and drivers
González-Torres, M., Pérez-Lombard, L., Coronel, J. F., Maestre, I. R., & Yan, D. (2022) · Energy Reports · doi:10.1016/j.egyr.2021.11.280 · Cited by 1,036
Ahmad, M. W., Mourshed, M., & Rezgui, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.038 · Cited by 1,013
Self-citationA review of machine learning in building load prediction
Zhang, L., Wen, J., Li, Y., Chen, J., Ye, Y., Fu, Y., & Livingood, W. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116452 · Cited by 671
Ahmad, M. W., Reynolds, J., & Rezgui, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.207 · Cited by 642
Self-citationIEA EBC Annex 66: Definition and simulation of occupant behavior in buildings
Yan, D., Hong, T., Dong, B., Mahdavi, A., D’Oca, S., Gaetani, I., & Feng, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.084 · Cited by 508
Metadata
- Authors
- Ahmad, M. W., Mourshed, M., Mundow, D., Sisinni, M., & Rezgui, Y.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2016-05
- Volume
- 120
- Pages
- 85-102
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2307825619
- Cited by
- 348
- References
- 56
- FWCI
- 46.52
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Building energy metering and environmental monitoring – A state-of-the-art review and directions for future research. https://app.cochat.ai/papers/10.1016/j.enbuild.2016.03.059
- The paper
- Ahmad, M. W., Mourshed, M., Mundow, D., Sisinni, M., & Rezgui, Y. (2016). Building energy metering and environmental monitoring – A state-of-the-art review and directions for future research. Energy and Buildings. https://doi.org/10.1016/j.enbuild.2016.03.059
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.