The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis
Abstract
Abstract Pyrolysis of plastics has gained more attention recently due to the advantages of environmental protection and energy conversion. In this study, low-density polyethylene (LDPE), polypropylene (PP) and polyvinyl chloride (PVC) were studied under high heating rate conditions to investigate pyrolysis behaviors and find the most suitable kinetic reaction mechanisms. The TG and DTG curves for LDPE were similar to those for PP, but different from those for PVC. It was found that high heating rate led to the shifting of initial, end and peak temperatures to higher values. The FTIR results showed the main products of LDPE and PP were alkanes and alkenes, and the major products of PVC were HCl, alkenes and a small number of aromatic compounds. A comparative study of model-free methods like Ozawa-Flynn-Wall (OFW), Kissinger-Akahira-Sunose (KAS) and Friedman method were discussed to calculate activation energy. Kinetic reaction mechanisms were predicted by using model-fitting methods including Coats-Redfern and Criado method. The pyrolysis reaction mechanism of LDPE was summarized as contracting sphere model, PP was summarized as contracting cylinder model, whereas that of PVC was concluded that two-dimension nucleation for the first stage and three-dimension diffusion (Jander) for the second stage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reaction Kinetics in Differential Thermal Analysis
Kissinger, H. E. (1957) · Analytical Chemistry · doi:10.1021/ac60131a045 · Cited by 13,196
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
A New Method of Analyzing Thermogravimetric Data
Ozawa, T. (1965) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.38.1881 · Cited by 6,911
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Friedman, H. L. (1964) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070060121 · Cited by 3,898
A quick, direct method for the determination of activation energy from thermogravimetric data
Flynn, J. H., & Wall, L. A. (1966) · Journal of Polymer Science Part B: Polymer Letters · doi:10.1002/pol.1966.110040504 · Cited by 3,228
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Solid-State Kinetic Models: Basics and Mathematical Fundamentals
Khawam, A., & Flanagan, D. R. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062746a · Cited by 2,023
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Estimating isothermal life from thermogravimetric data
Doyle, C. D. (1962) · Journal of Applied Polymer Science · doi:10.1002/app.1962.070062406 · Cited by 1,078
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Self-citationAboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
Ma, Z., Chen, D., Gu, J., Bao, B., & Zhang, Q. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.074 · Cited by 708
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Pyrolysis characteristics and kinetics of municipal solid wastes
Sørum, L., Grønli, M. G., & Hustad, J. E. (2001) · Fuel · doi:10.1016/s0016-2361(00)00218-0 · Cited by 527
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Hu, M., Chen, Z., Wang, S., Guo, D., Ma, C., Zhou, Y., Chen, J., Laghari, M., Fazal, S., Xiao, B., et al. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.058 · Cited by 342
Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.008 · Cited by 282
TG-FTIR analysis of PVC thermal degradation and HCl removal
Zhu, H. M., Jiang, X. G., Yan, J. H., Chi, Y., & Cen, K. F. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.11.011 · Cited by 281
TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS
Wu, J., Chen, T., Luo, X., Han, D., Wang, Z., & Wu, J. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.005 · Cited by 277
Kinetic analysis of DTG data from master curves
Criado, J. M. (1978) · Thermochimica Acta · doi:10.1016/0040-6031(78)85151-x · Cited by 276
Pyrolysis of synthetic polymers and plastic wastes. Kinetic study
Encinar, J. M., & González, J. F. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.12.011 · Cited by 274
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.046 · Cited by 253
Pyrolysis kinetics and combustion characteristics of waste recovered fuels
Grammelis, P., Basinas, P., Malliopoulou, A., & Sakellaropoulos, G. P. (2008) · Fuel · doi:10.1016/j.fuel.2008.02.002 · Cited by 251
Kinetic model for thermal dehydrochlorination of poly(vinyl chloride)
Sánchez-Jiménez, P. E., Perejón, A., Criado, J. M., Diánez, M. J., & Pérez-Maqueda, L. A. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.020 · Cited by 209
Study on the co-pyrolysis of rice straw and high density polyethylene blends using TG-FTIR-MS
Kai, X., Li, R., Yang, T., Shen, S., Ji, Q., & Zhang, T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.026 · Cited by 209
On the thermal treatment of plastic mixtures of MSW: Pyrolysis kinetics
Wu, C.-H., Chang, C.-Y., Hor, J.-L., Shih, S.-M., Chen, L.-W., & Chang, F.-W. (1993) · Waste Management · doi:10.1016/0956-053x(93)90046-y · Cited by 166
Pyrolysis kinetics of waste PVC pipe
Kim, S. (2001) · Waste Management · doi:10.1016/s0956-053x(00)00127-6 · Cited by 163
Kinetic modelling of RDF pyrolysis: Model-fitting and model-free approaches
Çepelioğullar, Ö., Haykırı-Açma, H., & Yaman, S. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.027 · Cited by 159
Thermogravimetric studies on the thermal decomposition of polyethylene
Conesa, J. A., Marcilla, A. F., Font, R., et al. (1996) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(95)00917-5 · Cited by 158
Kinetics and evolved gas analysis for pyrolysis of food processing wastes using TGA/MS/FT-IR
Özsin, G., & Pütün, A. E. (2017) · Waste Management · doi:10.1016/j.wasman.2017.03.020 · Cited by 154
Thermal behavior of waste tea pyrolysis by TG-FTIR analysis
Tian, L., Shen, B., Xu, H., Li, F., Wang, Y., & Singh, S. (2016) · Energy · doi:10.1016/j.energy.2016.03.022 · Cited by 144
Study on pyrolytic kinetics and behavior: The co-pyrolysis of microalgae and polypropylene
Wu, X., Wu, Y., Wu, K., Chen, Y., Hu, H., & Yang, M. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.06.029 · Cited by 135
The effect of some fillers on PVC degradation
Karayıldırım, T., Yanık, J., Yüksel, M., Sağlam, M., Vasile, C., & Bockhorn, H. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2005.04.012 · Cited by 127
Jordan, K. J., Suib, S. L., & Koberstein, J. T. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp003223k · Cited by 95
Reverse engineering of plastic waste into useful fuel products
Owusu, P. A., Banadda, N., Zziwa, A., Seay, J. R., & Kiggundu, N. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.12.020 · Cited by 89
GHG emission and carbon sequestration potential from MSW of Indian metro cities
Kumar, A., & Sharma, M. P. (2014) · Urban Climate · doi:10.1016/j.uclim.2014.03.002 · Cited by 78
Wang, Z., Wan, K., Xia, J., et al. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00646 · Cited by 32
Cited by
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Zong, P., Jiang, Y., Tian, Y., Li, J., Yuan, M., Ji, Y., Chen, M., Li, D., & Qiao, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112777 · Cited by 412
Self-citationKinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste
Zhang, Y., Fu, Z., Wang, W., Ji, G., Zhao, M., & Li, A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c04915 · Cited by 283
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2020) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.09.003 · Cited by 262
Metadata
- Authors
- Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 171
- Pages
- 1106-1115
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2808828429
- Cited by
- 372
- References
- 40
- FWCI
- 8.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.