The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions
Abstract
The present study relates to the investigation of degradation of polymers such as HDPE, PP, PS and PET individually and in mixed forms. Eleven different mixture combinations were analyzed via TG Analysis to determine their degradation behavior individually and in mixed forms. FTIR analysis of the raw polymers was performed to investigate the presence of different functional groups in the sample. Online TG-FTIR analysis was performed to investigate the functional groups present in the volatiles fractions during single component pyrolysis and the interaction of polymers during co-pyrolysis was analyzed, compared and reported. Also, a real-world post consumer mixed waste was also analyzed and compared. During the co-pyrolysis of HDPE with PP and PS, the degradation of PP was delayed whereas PS reduced the degradation temperature of HDPE. In the case of degradation of PS with PP and PET, the increase in degradation temperature was reported whereas, in the case of PET and HDPE mixture, the degradation temperature of HDPE was reduced. During the interaction of PP and PET mixed degradation, PET degradation temperature was delayed. During the FTIR analysis a large amount of alkanes, alkenes, aromatics groups were observed during the degradation of HDPE, PP and PS whereas in case of PET the presence of oxygenated groups is observed. During the mixed degradation, the presence of PET in the sample caused the formation of oxygenated groups by reducing the absorption intensity of other groups or by disappearing the groups. Compounds such as benzoic acid, CO and CO2 was detected during the degradation of PET whereas in other polymers a large amount of methane or methylene group is observed. Overall during the degradation of mixed polymer mixture presence of PET played a vital role in the formation of light gas fractions. Even though a numerous investigation on co-pyrolysis of polymers were available, there is still not sufficient information of interaction of polymers with each other, especially with PET. This article attempts to fill this gap.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
Interpretation of Infrared Spectra, A Practical Approach
Coates, J. (2000) · Encyclopedia of Analytical Chemistry · doi:10.1002/9780470027318.a5606 · Cited by 4,411
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
Self-citationLopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 493
Self-citationPyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment
Maitlo, G., Ali, I., Maitlo, H. A., Ali, S., Unar, I. N., Ahmad, M. B., Bhutto, D. K., Karmani, R. K., Naich, S. U. R., Sajjad, R. U., et al. (2022) · Sustainability · doi:10.3390/su141811637 · Cited by 143
Zhou, X., Zhu, L., Dong, W., & Jiang, M. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140546 · Cited by 41
Household mixed plastic waste derived adsorbents for CO2 capture: A feasibility study
Dan, E., McCue, A. J., Dionisi, D., & Fernández Martín, C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120466 · Cited by 33
Metadata
- Authors
- Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 93
- Issue
- 3
- Pages
- 1020-1035
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W2981066927
- Cited by
- 262
- References
- 46
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions. https://app.cochat.ai/papers/10.1016/j.joei.2019.09.003
- The paper
- Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2020). A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions. Journal of the Energy Institute. https://doi.org/10.1016/j.joei.2019.09.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.