Performance of geothermal energy extraction in a horizontal well by using CO2 as the working fluid
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract With the rapid depletion of oil and gas reservoirs, many oil and gas wells become abandoned. These abandoned wells could be recovered if they are drilled in proper geothermal layers. Besides, CO2 is always selected as working fluid due to huge amount of resources, as well as for the purpose of CO2 geological storage. At present, the study on CO2 flow in the horizontal wellbores is quite limited. In this paper, a series of works were done on establishing a model to describe the heat and mass transfer process of CO2 in abandoned horizontal wellbores. The model is solved with numerical method on space. Some meaningful conclusions are listed below: (a). A smaller injection rate is crucial to obtain a higher geothermal production efficiency. Besides, a high injection pressure can exert too much requirement on the equipment; (b). In order to obtain a higher geothermal energy extraction rate, a larger mass flow rate is recommended; (c). a smaller injection temperature is recommended to obtain a higher geothermal energy extraction rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Working fluids for low-temperature organic Rankine cycles
SALEH, B., KOGLBAUER, G., WENDLAND, M., & FISCHER, J. (2007) · Energy · doi:10.1016/j.energy.2006.07.001 · Cited by 1,045
Spycher, N., & Pruess, K. (2010) · Transport in Porous Media · doi:10.1007/s11242-009-9425-y · Cited by 315
Cited by
Brine management strategies, technologies, and recovery using adsorption processes
Al-Absi, R. S., Abu-Dieyeh, M., & Al-Ghouti, M. A. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101541 · Cited by 48
Metadata
- Authors
- Sun, F., Yao, Y., Li, G., & Li, X.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 171
- Pages
- 1529-1539
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2810234840
- Cited by
- 210
- References
- 2
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.