Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.

A Phase-Partitioning Model for CO2–Brine Mixtures at Elevated Temperatures and Pressures: Application to CO2-Enhanced Geothermal Systems

Open access
Spycher, Nicolas, Pruess, Karsten · 2010 · Transport in Porous Media

Abstract

Correlations are presented to compute the mutual solubilities of CO 2 and chloride brines at temperatures 12–300°C, pressures 1–600 bar (0.1–60 MPa), and salinities 0–6 m NaCl. The formulation is computationally efficient and primarily intended for numerical simulations of CO 2 -water flow in carbon sequestration and geothermal studies. The phase-partitioning model relies on experimental data from literature for phase partitioning between CO 2 and NaCl brines, and extends the previously published correlations to higher temperatures. The model relies on activity coefficients for the H 2 O-rich (aqueous) phase and fugacity coefficients for the CO 2 -rich phase. Activity coefficients are treated using a Margules expression for CO 2 in pure water, and a Pitzer expression for salting-out effects. Fugacity coefficients are computed using a modified Redlich–Kwong equation of state and mixing rules that incorporate asymmetric binary interaction parameters. Parameters for the calculation of activity and fugacity coefficients were fitted to published solubility data over the P – T range of interest. In doing so, mutual solubilities and gas-phase volumetric data are typically reproduced within the scatter of the available data. An example of multiphase flow simulation implementing the mutual solubility model is presented for the case of a hypothetical, enhanced geothermal system where CO 2 is used as the heat extraction fluid. In this simulation, dry supercritical CO 2 at 20°C is injected into a 200°C hot-water reservoir. Results show that the injected CO 2 displaces the formation water relatively quickly, but that the produced CO 2 contains significant water for long periods of time. The amount of water in the CO 2 could have implications for reactivity with reservoir rocks and engineered materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s11242-009-9425-y

Cites

63 of 63 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Mutual solubilities of CO 2 and pure water: Comparison of model results ( lines ) with experimental data ( symbols ) from 100 to 250 ◦ C up to 600bar
Fig. 1 Mutual solubilities of CO 2 and pure water: Comparison of model results ( lines ) with experimental data ( symbols ) from 100 to 250 ◦ C up to 600barCC-BY-NC · From the PDF
Fig. 2 Mutual solubilities of CO 2 and pure water: Comparison of model results ( lines ) with experimental data ( symbols ) above 250 ◦ C up to 300 ◦ C and 600bar. Note that at 300 ◦ C, the model starts to break down above about 500bar, as full miscibility is approached (the critical curve at 300 ◦ Cis reached at around 567bar; Blencoe et al. 2001)
Fig. 2 Mutual solubilities of CO 2 and pure water: Comparison of model results ( lines ) with experimental data ( symbols ) above 250 ◦ C up to 300 ◦ C and 600bar. Note that at 300 ◦ C, the model starts to break down above about 500bar, as full miscibility is approached (the critical curve at 300 ◦ Cis reached at around 567bar; Blencoe et al. 2001)CC-BY-NC · From the PDF
Fig. 3 Volume of the compressed 'gas' phase for mixtures of CO 2 and pure water. Comparison of model results ( lines ) with data from other sources ( symbols ): ( a ) volumes at the phase boundary determined from molecular simulations; ( b ) experimental data for various water contents, near and progressively away from the phase boundary
Fig. 3 Volume of the compressed 'gas' phase for mixtures of CO 2 and pure water. Comparison of model results ( lines ) with data from other sources ( symbols ): ( a ) volumes at the phase boundary determined from molecular simulations; ( b ) experimental data for various water contents, near and progressively away from the phase boundaryCC-BY-NC · From the PDF
Fig. 4 Solubility of CO 2 in saline solutions: comparison of model results ( lines ) with experimental data ( symbols ) at various temperatures and pressures
Fig. 4 Solubility of CO 2 in saline solutions: comparison of model results ( lines ) with experimental data ( symbols ) at various temperatures and pressuresCC-BY-NC · From the PDF
Fig. 5 Computed CO2 solubility in pure and saline water: Comparison of model results from this study ( lines ) with those of Duan and Sun (2003) ( symbols )
Fig. 5 Computed CO2 solubility in pure and saline water: Comparison of model results from this study ( lines ) with those of Duan and Sun (2003) ( symbols )CC-BY-NC · From the PDF
Fig. 6 Computed mutual solubilities of CO 2 and H 2 O as a function of temperature at various pressures, for pure water and a 4 molal NaCl solution
Fig. 6 Computed mutual solubilities of CO 2 and H 2 O as a function of temperature at various pressures, for pure water and a 4 molal NaCl solutionCC-BY-NC · From the PDF
Fig. 7 Computed mutual solubilities of CO 2 and H2 O as a function of salinity between 75 and 300 ◦ C at elevated pressures
Fig. 7 Computed mutual solubilities of CO 2 and H2 O as a function of salinity between 75 and 300 ◦ C at elevated pressuresCC-BY-NC · From the PDF
Image 8
CC-BY-NC · From the PDF
Fig. 9 Simulated production behavior of the EGS system in response to injection of pure CO 2 at constant downhole pressure of 210bar on linear ( a ) and logarithmic time scales ( b )
Fig. 9 Simulated production behavior of the EGS system in response to injection of pure CO 2 at constant downhole pressure of 210bar on linear ( a ) and logarithmic time scales ( b )CC-BY-NC · From the PDF
Fig. 10 Simulated rate and composition of produced fluid
Fig. 10 Simulated rate and composition of produced fluidCC-BY-NC · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 62 references

Research works printed but not linked: 9

  1. Brown, D.W.: A hot dry rock geothermal energy concept utilizing supercritical CO2 instead of water. Proceedings, twenty-fifth workshop on geothermal reservoir engineering, Stanford University, January 2000, pp. 233–238
  2. Denbigh, K.: The principles of chemical equilibrium, 4th ed. Cambridge University Press, 494 pp. (1983)
  3. Drummond, S.E.: Boiling and mixing of hydrothermal fluids: chemical effects on mineral precipitation. Ph.D. thesis, Pennsylvania State University (1981)
  4. Fouillac, C., Sanjuan, B., Gentier, S., Czernichowski-Lauriol, I.: Could sequestration of CO2 be combined with the development of enhanced geothermal systems? In: Paper presented at the Third Annual Conference on Carbon Capture and Sequestration, Alexandria, Virginia, May 3–6, 2004
  5. IPCC: Carbon dioxide capture and storage In: Metz, B., Davidson, O., de Coninck, H., Loos, M., Meyer, L. (eds.) Prepared by Working Group III of the Intergovernmental Panel on Climate Change, Cambridge University Press, 431 pp. (2005)
  6. Malinin S.D., Kurovskaya N.A.: Investigations of CO2 solubility in a solution of chlorides at elevated temperatures and pressures of CO2. Geokhimiya 4, 547–551 (1975)
  7. Malinin S.D., Savelyeva N.I.: The solubility of CO2 in NaCl and CaCl2 solutions at 25, 50, and 75°C under elevated CO2 pressures. Geokhimiya 6, 643–653 (1972)
  8. Malinin S.D.: The system water-carbon dioxide at high temperatures and pressures. Geokhimiya 3, 235–245 (1959)
  9. MIT (ed.): The Future of Geothermal Energy. (Massachusetts Institute of Technology, Cambridge,MA 2006)

Cited by

See all 342

Metadata

Authors
Spycher, N., & Pruess, K.
Affiliations
Lawrence Berkeley National Laboratory (US)
Corresponding author
Spycher, Nicolas
Venue
Transport in Porous Media
Published
2009-07-17
Volume
82
Issue
1
Pages
173-196
ISSN
  • 0169-3913 (ISSN-L)
  • 1573-1634
OpenAlex
W2166451257
Cited by
315
References
62
Citations by year
2026: 22 · 2025: 24 · 2024: 30 · 2023: 24 · 2022: 26 · 2021: 22 · 2020: 19 · 2019: 19 · 2018: 14 · 2017: 15 · 2016: 23 · 2015: 22 · 2014: 16 · 2013: 19 · 2012: 9
FWCI
4.00
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
  • Transport in Porous Media (publishedVersion, cc-by-nc)
  • eScholarship (California Digital Library) (submittedVersion, other-oa)
  • eScholarship (California Digital Library) (submittedVersion)
Funders
  • U.S. Department of Energy (-AC02-05CH11231, Contract No. DE-AC02-05-CH11231, 05CH11231, No. DE-AC02-05-CH11231, DE AC02 05CH11231, DE-AC02-)
  • Office of Science (No. DE-AC02- 05-CH11231, DEAC02–05CH11231, AC02-05CH11231, DE-AC02, 05CH11231, Contract No. DE-AC02-05CH11231)
  • Lawrence Berkeley National Laboratory (AC02‐05CH11231, DE-AC02-05CH11231, No. DE-AC02-05CH11231, Contract No. DE-AC02-05CH11231, 05CH11231)
Topics
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Phase Equilibria and Thermodynamics
  • Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
Keywords
chloride brines, phase partitioning, supercritical carbon dioxide, carbon sequestration, activity coefficients, fugacity coefficients, salting-out, Margules model, Pitzer model, Redlich-Kwong equation of state, binary interaction parameters, multiphase flow

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Phase-Partitioning Model for CO2–Brine Mixtures at Elevated Temperatures and Pressures: Application to CO2-Enhanced Geothermal Systems. https://app.cochat.ai/papers/10.1007/s11242-009-9425-y
The paper
Spycher, N., & Pruess, K. (2010). A Phase-Partitioning Model for CO2–Brine Mixtures at Elevated Temperatures and Pressures: Application to CO2-Enhanced Geothermal Systems. Transport in Porous Media. https://doi.org/10.1007/s11242-009-9425-y

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.