The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)
Abstract
Abstract Co-pyrolysis corn stalk (CS) and high-density polyethylene (HDPE) is an effective method to mitigate environmental pollution and reuse the problematic plastic to produce valuable energy. The devolatilization kinetics and the evolution of gaseous species during co-pyrolysis were investigated via TG-FTIR-MS. Moreover, the possible interactions of CS and HDPE were explored. The co-pyrolysis process of CS-HDPE blends was found to be divided into two decomposition stages. The first stage (150–400 °C) was mainly associated with the decomposition of CS. The second stage (400–515 °C) was the result of combinations of the thermal degradations of CS and HDPE, with the degradation of HDPE contributing the most. Co-pyrolysis CS with HDPE could delay the decomposition of HDPE. In addition, the difference between experimental and theoretical weight loss (△W) was found to be less than zero when the percentage of CS was 80%. Furthermore, the average of the experimental activation energy was lower than that of the theoretical value for 80% CS. Thus, the positive synergy was strongest when the CS content was 80%, based on the thermal decomposition behavior and the activation energy. However, the blending ratio of CS-HDPE had little effect on the major categories of gaseous products during co-pyrolysis. Moreover, the interaction between CS and HDPE in the first stage (150–400 °C) could promote the release of H2, CO/C2H4 and C3H6 in the blends with 80%, 60%, and 60% CS, respectively. Additionally, aliphatic hydrocarbons (CH4, C2H6, C3H8, C4H10, C4H8, C2H2) and oxygen-containing compounds (aldehydes, alcohols, ketones, acids) were suppressed by the interaction when the percentage of CS was less than 60%. In the second stage (400–850 °C), the yields of aliphatic hydrocarbons (CH4, C2H6, C3H8, C4H10, C4H8, C2H2, C4H6) were inhibited, independent of the content of CS in the blends. In addition, the production of H2, CO/C2H4, and C3H6 was promoted when the percentage of CS was below 80%, 80%, and 60%, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Ryu, H. W., Kim, D. H., Jae, J., Lam, S. S., Park, E. D., & Park, Y.-K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123473 · Cited by 336
Engamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment
Maitlo, G., Ali, I., Maitlo, H. A., Ali, S., Unar, I. N., Ahmad, M. B., Bhutto, D. K., Karmani, R. K., Naich, S. U. R., Sajjad, R. U., et al. (2022) · Sustainability · doi:10.3390/su141811637 · Cited by 143
Zhong, S., Zhang, B., Liu, C., & Shujaa aldeen, A. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113717 · Cited by 93
Metadata
- Authors
- Kai, X., Yang, T., Shen, S., & Li, R.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 181
- Pages
- 202-213
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2905551716
- Cited by
- 225
- References
- 3
- FWCI
- 6.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE). https://app.cochat.ai/papers/10.1016/j.enconman.2018.11.065
- The paper
- Kai, X., Yang, T., Shen, S., & Li, R. (2019). TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE). Energy Conversion and Management. https://doi.org/10.1016/j.enconman.2018.11.065
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.