Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

Recycling and recovery routes of plastic solid waste (PSW): A review

Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,419 · see citing works

A review on pyrolysis of plastic wastes

Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126 · see citing works

Mechanistic implications of plastic degradation

Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569 · see citing works

Thermal degradation of PVC: A review

Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2015) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,056 · see citing works

Catalytic pyrolysis of plastic waste: A review

Miandad, R., Barakat, M. A. E.-F., Aburiazaiza, A. S., Rehan, M., & Nizami, A. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 986 · see citing works

A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil

Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903 · see citing works

Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)

Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, E. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 733 · see citing works

Current state and future prospects of plastic waste as source of fuel: A review

Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 701 · see citing works

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 688 · see citing works

Plastics to fuel: a review

Kunwar, B., CHENG, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 648 · see citing works

The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals

Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 530 · see citing works

Effect of plastic waste types on pyrolysis liquid oil

Miandad, R., Barakat, M. A. E.-F., Aburiazaiza, A. S., Rehan, M., Ismail, I. M. I., & Nizami, A. (2016) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.09.017 · Cited by 508 · see citing works

Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review

Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497 · see citing works

A review on tertiary recycling of high-density polyethylene to fuel

Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 496 · see citing works

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479 · see citing works

Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and Chemicals

Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 464 · see citing works

Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor

Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 441 · see citing works

Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock

Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 432 · see citing works

Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor

López-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 401 · see citing works

Co-pyrolysis of pine cone with synthetic polymers

Brebu, M. A., Uçar, S., Vasile, C., & Yanık, J. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.029 · Cited by 372 · see citing works

Catalytic pyrolysis of polyethylene

Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 366 · see citing works

Feedstock recycling of polymers by pyrolysis in a fluidised bed

Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 360 · see citing works

Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene

Önal, E., Uzun, B. B., & Pütün, A. E. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.11.022 · Cited by 350 · see citing works

Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor

Xue, Y., Zhou, S., Brown, R. C., Kelkar, A. G., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 349 · see citing works

Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time

Mastral, J. F., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 348 · see citing works

Influence of temperature on biomass pyrolysis in a conical spouted bed reactor

Amutio, M., López, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345 · see citing works

Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions

Marcilla, A. F., Beltrán, M., & Navarro, R. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.07.026 · Cited by 337 · see citing works

Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags

Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 324 · see citing works

Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor

Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 317 · see citing works

Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review

Aguado, J., Serrano, D. P., & Escola, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800393w · Cited by 312 · see citing works

Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts

Sakata, Y., Uddin, M. A., & Muto, A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00013-3 · Cited by 306 · see citing works

Chemical recycling of brominated flame retarded plastics from e-waste for clean fuels production: A review

Ma, C., Yu, J., Wang, B., Song, Z., Xiang, J. H., Hu, S., Su, S., & Sun, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.020 · Cited by 289 · see citing works

Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene

Castaño, P., Elordi, G., Olazar, M., Aguayo, A. T., Pawelec, B., & Bilbao, J. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.02.024 · Cited by 287 · see citing works

Gasoline-range hydrocarbons produced from microwave-induced pyrolysis of low-density polyethylene over ZSM-5

Zhang, X., Lei, H., Yadavalli, G., Zhu, L., Wei, Y., & Liu, Y. (2014) · Fuel · doi:10.1016/j.fuel.2014.12.013 · Cited by 287 · see citing works

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

Arabiourrutia, M., Elordi, G., López, G., Borsella, E., Bilbao, J., & Olazar, M. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275 · see citing works

Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research

Butler, E., Devlin, G. J., & McDonnell, K. P. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270 · see citing works

Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires

Hita, I., Arabiourrutia, M., Olazar, M., Bilbao, J., Arandes, J. M., & Castaño, P. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.081 · Cited by 269 · see citing works

Co-pyrolysis of wood biomass and synthetic polymer mixtures. Part I: influence of experimental conditions on the evolution of solids, liquids and gases

Sharypov, V. I., Marin, N., Beregovtsova, N. G., Baryshnikov, S. V., Кузнецов, Б. Н., Cebolla, V. L., & Weber, J. V. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00167-x · Cited by 268 · see citing works

Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor

Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264 · see citing works

Microwave-Induced Pyrolysis of Plastic Wastes

Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 262 · see citing works

Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system

Aguado, J., Serrano, D. P., Miguel, G. S., Castro, M. C., & Madrid, S. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.008 · Cited by 258 · see citing works

Pyrolysis of plastic wastes. 1. Effect of plastic waste composition on product yield

Pinto, F., Costa, P., Gulyurtlu, I., & Cabrita, I. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00007-8 · Cited by 253 · see citing works

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

Artetxe, M., López, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250 · see citing works

Catalytic Degradation of High-Density Polyethylene over Different Zeolitic Structures

Manos, G., Garforth, A. A., & Dwyer, J. P. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990512q · Cited by 242 · see citing works

H-ZSM5 Catalyzed Co-Pyrolysis of Biomass and Plastics

Dorado, C., Mullen, C. A., & Boateng, A. A. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400354g · Cited by 240 · see citing works

Investigation of catalytic degradation of high-density polyethylene by hydrocarbon group type analysis

Seo, Y., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 234 · see citing works

Analysis of products derived from the fast pyrolysis of plastic waste

Williams, E. A., & Williams, P. T. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00048-x · Cited by 231 · see citing works

Role of pore structure in the deactivation of zeolites (HZSM-5, Hβ and HY) by coke in the pyrolysis of polyethylene in a conical spouted bed reactor

Elordi, G., Olazar, M., López, G., Castaño, P., & Bilbao, J. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.12.002 · Cited by 229 · see citing works

Thermogravimetric analysis of the pyrolysis characteristics and kinetics of plastics and biomass blends

Oyedun, A. O., Tee, C. Z., Hanson, S., & Hui, C. W. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.08.010 · Cited by 227 · see citing works

Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor

Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200186m · Cited by 226 · see citing works

Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor

Artetxe, M., López, G., Amutio, M., Barbarias, I., Arregi, A., Aguado, R., Bilbao, J., & Olazar, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.034 · Cited by 225 · see citing works

Continuous pyrolysis of waste tyres in a conical spouted bed reactor

López, G., Olazar, M., Aguado, R., & Bilbao, J. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.029 · Cited by 223 · see citing works

Pyrolysis of mixed plastics into aromatics

Kaminsky, W., & Kim, J.-S. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00012-1 · Cited by 220 · see citing works

Co-pyrolysis of sugarcane bagasse and low-density polyethylene: Influence of plastic on pyrolysis product yield

Dewangan, A., Pradhan, D., & Singh, R. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.011 · Cited by 220 · see citing works

Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons

Miskolczi, N., Bartha, L., Deák, G., & Jóvér, B. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.025 · Cited by 219 · see citing works

Syngas from steam gasification of polyethylene in a conical spouted bed reactor

Erkiaga, A., López, G., Amutio, M., Bilbao, J., & Olazar, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.022 · Cited by 210 · see citing works

Improving the aromatic production in catalytic fast pyrolysis of cellulose by co-feeding low-density polyethylene

Li, X., Zhang, H., Li, J., Su, L., Zuo, J., Komarneni, S., & Wang, Y. (2013) · Applied Catalysis A General · doi:10.1016/j.apcata.2013.01.038 · Cited by 208 · see citing works

Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier

Wilk, V., & Hofbauer, H. (2013) · Fuel · doi:10.1016/j.fuel.2013.01.068 · Cited by 208 · see citing works

Olefins from polyolefins and mixed plastics by pyrolysis

Kaminsky, W., Schlesselmann, B., & Simon, C. (1995) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(94)00830-t · Cited by 204 · see citing works

Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks

Miskolczi, N., Bartha, L., & Deák, G. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.056 · Cited by 204 · see citing works

Pyrolysis of polyolefins for increasing the yield of monomers’ recovery

Donaj, P., Kaminsky, W., Buzeto, F., & Yang, W. (2011) · Waste Management · doi:10.1016/j.wasman.2011.10.009 · Cited by 202 · see citing works

Evaluation of the co-pyrolysis of lignin with plastic polymers by TG-FTIR and Py-GC/MS

Jin, W., Shen, D., Liu, Q., & Xiao, R. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.08.001 · Cited by 199 · see citing works

Effect of pressure on thermal degradation of polyethylene

Murata, K., Sato, K., & Sakata, Y. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 197 · see citing works

Wood/plastic copyrolysis in an auger reactor: Chemical and physical analysis of the products

Bhattacharya, P., Steele, P. H., Hassan, E. B., Mitchell, B. K., Ingram, L. L., & Pittman, C. U. (2009) · Fuel · doi:10.1016/j.fuel.2009.01.009 · Cited by 195 · see citing works

Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor

Zhang, H., Nie, J., Xiao, R., Jin, B., Dong, C., & Xiao, G. (2014) · Energy & Fuels · doi:10.1021/ef4019299 · Cited by 195 · see citing works

Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes

López-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Adrados, A., & Laresgoiti, M. F. (2011) · Waste Management · doi:10.1016/j.wasman.2011.04.004 · Cited by 193 · see citing works

Pyrolysis of Polyethylene in a Fluidized Bed Reactor

Conesa, J. A., Font, R., Marcilla, A. F., & García, A. N. J. (1994) · Energy & Fuels · doi:10.1021/ef00048a012 · Cited by 193 · see citing works

Light olefins from HDPE cracking in a two-step thermal and catalytic process

Artetxe, M., López, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.105 · Cited by 191 · see citing works

Operating Conditions for the Pyrolysis of Poly-(ethylene terephthalate) in a Conical Spouted-Bed Reactor

Artetxe, M., López, G., Amutio, M., Elordi, G., Olazar, M., & Bilbao, J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900557c · Cited by 187 · see citing works

Efficient disposal of waste polyolefins through microwave assisted pyrolysis

Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2013) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 184 · see citing works

Pyrolysis of synthetic tire rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black

Kaminsky, W., & Mennerich, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00129-7 · Cited by 182 · see citing works

Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis

Fernandez-Akarregi, A. R., Makibar, J., López, G., Amutio, M., & Olazar, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.02.022 · Cited by 181 · see citing works

Thermal Cracking of Virgin and Waste Plastics of PP and LDPE in a Semibatch Reactor under Atmospheric Pressure

Yan, G., Jing, X., Wen, H., & Xiang, S. (2015) · Energy & Fuels · doi:10.1021/ef502919f · Cited by 178 · see citing works

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene

Ciliz, N. K., Eki̇nci̇, E. B., & Snape, C. E. (2003) · Waste Management · doi:10.1016/j.wasman.2003.06.002 · Cited by 176 · see citing works

Catalytic activity of zeolitic and mesostructured catalysts in the cracking of pure and waste polyolefins

Aguado, J., Serrano, D. P., Miguel, G. S., Escola, J. M., & Rodríguez, J. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.06.004 · Cited by 176 · see citing works

Fluidized bed thermal degradation products of HDPE in an inert atmosphere and in air–nitrogen mixtures

Mastral, J. F., Esperanza, E., Berrueco, C., Juste, M., & Ceamanos, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00068-2 · Cited by 175 · see citing works

A sequential process for hydrogen production based on continuous HDPE fast pyrolysis and in-line steam reforming

Barbarias, I., López, G., Álvarez, J., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.091 · Cited by 171 · see citing works

Chemical recycling of polytetrafluoroethylene by pyrolysis

Simon, C. M., & Kaminsky, W. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00097-9 · Cited by 169 · see citing works

Wax Formation in the Pyrolysis of Polyolefins in a Conical Spouted Bed Reactor

Aguado, R., Olazar, M., José, M. J. S., Gaisán, B., & Bilbao, J. (2002) · Energy & Fuels · doi:10.1021/ef020043w · Cited by 168 · see citing works

Moving from recycling to waste prevention: A review of barriers and enables

Bartl, A. (2014) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x14541986 · Cited by 167 · see citing works

Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium catalyst

Namioka, T., Saito, A., Inoue, Y., yeongsu, P., Min, T., Roh, S. A., & Yoshikawa, K. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.053 · Cited by 166 · see citing works

Catalytical and thermal pyrolysis of polyolefins

Kaminsky, W., & Zorriqueta, I.-J. N. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.005 · Cited by 165 · see citing works

Quantitative analysis of random scission and chain-end scission in the thermal degradation of polyethylene

Ueno, T., Nakashima, E., & Takeda, K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.020 · Cited by 164 · see citing works

Study of the co-pyrolysis of biomass and plastic wastes

Paradela, F., Pinto, F., Gulyurtlu, I., et al. (2008) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-008-0176-1 · Cited by 164 · see citing works

Copyrolysis of wood biomass and synthetic polymers mixtures. Part II: characterisation of the liquid phases

Marin, N., Collura, S., Sharypov, V. I., Beregovtsova, N. G., Baryshnikov, S. V., Kutnetzov, B. N., Cebolla, V. L., & Weber, J. V. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00179-6 · Cited by 163 · see citing works

Thermal and thermo-catalytic degradation of high-density polyethylene waste

Miskolczi, N., Bartha, L., Deák, G., Jóvér, B., & Kalló, D. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.002 · Cited by 161 · see citing works

Basic study on a continuous flow reactor for thermal degradation of polymers

Murata, K., Hirano, Y., Sakata, Y., & Uddin, M. A. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00181-4 · Cited by 161 · see citing works

Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite

Mastral, J. F., Berrueco, C., Gea, M., & Ceamanos, J. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.06.009 · Cited by 160 · see citing works

Catalytic pyrolysis of black-liquor lignin by co-feeding with different plastics in a fluidized bed reactor

Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158 · see citing works

Environmental engineering: Stepwise pyrolysis of plastic waste

Bockhorn, H., Hentschel, J., Hornung, A., et al. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00385-6 · Cited by 156 · see citing works

Pyrolysis of mixed polyolefins in a fluidised-bed reactor and on a pyro-GC/MS to yield aliphatic waxes

Predel, M., & Kaminsky, W. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00131-2 · Cited by 156 · see citing works

Polymer waste recycling over “used” catalysts

Salmiaton, A., Garforth, A. A., Harris, D. H., Rawlence, D. J., & Uemichi, Y. (2002) · Catalysis Today · doi:10.1016/s0920-5861(02)00076-7 · Cited by 155 · see citing works

Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE

Hernández, M. D. R., Gómez‐Siurana, A., García, A. N. J., Agulló, J., & Marcilla, A. F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.10.017 · Cited by 154 · see citing works

Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking

Artetxe, M., López, G., Elordi, G., Amutio, M., Bilbao, J., & Olazar, M. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300178e · Cited by 154 · see citing works

Catalytic degradation of polyethylene over solid acid catalysts

Park, D. W., Hwang, E. Y., Kim, J. R., Choi, J., Kim, Y. A., & Woo, H.-C. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00004-x · Cited by 152 · see citing works

Tertiary recycling of polypropylene by catalytic cracking in a semibatch stirred reactor

Cardona, S., & Corma, A. (2000) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(99)00127-7 · Cited by 152 · see citing works

Co-pyrolysis of wood biomass and synthetic polymers mixtures. Part III: Characterisation of heavy products

Sharypov, V. I., Beregovtsova, N. G., Кузнецов, Б. Н., Membrado, L., Cebolla, V. L., Marin, N., & Weber, J. V. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00071-2 · Cited by 149 · see citing works

Catalytic cracking of polyethylene over zeolite mordenite with enhanced textural properties

Aguado, J., Serrano, D. P., Escola, J. M., & Peral, Á. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.009 · Cited by 147 · see citing works

Reverse polymerization of waste polystyrene through microwave assisted pyrolysis

Undri, A., Frediani, M., Rosi, L., & Frediani, P. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.001 · Cited by 145 · see citing works

Catalytic conversion of polyolefins into fuels over zeolite beta

Aguado, J., Serrano, D. P., Escola, J. M., Garagorri, E., & Fernández, J. A. L. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00023-9 · Cited by 144 · see citing works

Stepwise pyrolysis for raw material recovery from plastic waste

Bockhorn, H., Hornung, A., & Hornung, U. (1998) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00066-7 · Cited by 140 · see citing works

Influence of FCC catalyst steaming on HDPE pyrolysis product distribution

Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137 · see citing works

Catalytic degradation of polymers: Part III—Degradation of polystyrene

Audisio, G., Bertini, F., Beltrame, P. L., & Carniti, P. (1990) · Polymer Degradation and Stability · doi:10.1016/0141-3910(90)90030-b · Cited by 135 · see citing works

Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor

Milne, B. J., Behie, L. A., & Berruti, F. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00014-5 · Cited by 134 · see citing works

Pyrolysis of Mixed Plastic Wastes for the Recovery of Benzene, Toluene, and Xylene (BTX) Aromatics in a Fluidized Bed and Chlorine Removal by Applying Various Additives

Cho, M.-H., Jung, S.-H., & Kim, J.-S. (2009) · Energy & Fuels · doi:10.1021/ef901127v · Cited by 131 · see citing works

Thermal and catalytic decomposition of mixed plastics

Vasile, C., Pakdel, H., Brebu, M. A., Onu, P., Darie, H., & Ciocâlteu, S. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00151-0 · Cited by 131 · see citing works

Microwave-assisted pyrolysis of HDPE using an activated carbon bed

Russell, A. D., Antreou, E. I., Lam, S. S., Ludlow-Palafox, C., & Chase, H. A. (2012) · RSC Advances · doi:10.1039/c2ra20859h · Cited by 130 · see citing works

Investigations on heat transfer and hydrodynamics under pyrolysis conditions of a pilot-plant draft tube conical spouted bed reactor

Makibar, J., Fernandez-Akarregi, A. R., Álava, I., Cueva, F., López, G., & Olazar, M. (2011) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.05.013 · Cited by 128 · see citing works

Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems

Shah, J., Jan, M. R., Mabood, F., & Jabeen, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.016 · Cited by 128 · see citing works

Are carbenium and carbonium ions reaction intermediates in zeolite-catalyzed reactions?

Boronat, M., & Corma, A. (2007) · Applied Catalysis A General · doi:10.1016/j.apcata.2007.09.050 · Cited by 128 · see citing works

Air gasification of mixed plastic wastes using a two-stage gasifier for the production of producer gas with low tar and a high caloric value

Kim, J., Mun, T., Kim, J., & Kim, J.-S. (2011) · Fuel · doi:10.1016/j.fuel.2011.02.021 · Cited by 128 · see citing works

Energy generation by air gasification of two industrial plastic wastes in a pilot scale fluidized bed reactor

Arena, U., & Gregorio, F. D. (2014) · Energy · doi:10.1016/j.energy.2014.01.084 · Cited by 127 · see citing works

Thermochemical conversion of polymer wastes into hydrocarbon fuels over various fluidizing cracking catalysts

Huang, W.-C., Huang, M.-S., Huang, C., Chen, C., & Ou, K. (2010) · Fuel · doi:10.1016/j.fuel.2010.04.013 · Cited by 125 · see citing works

Catalyst Effect on the Composition of Tire Pyrolysis Products

Olazar, M., Aguado, R., Arabiourrutia, M., López, G., Barona, A., & Bilbao, J. (2008) · Energy & Fuels · doi:10.1021/ef8002153 · Cited by 125 · see citing works

Maximizing carbon efficiency of petrochemical production from catalytic co-pyrolysis of biomass and plastics using gallium-containing MFI zeolites

Li, J., Yu, Y., Li, X., Wang, W., Yu, G., Deng, S., Huang, J. G., Wang, B., & Wang, Y. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.02.015 · Cited by 123 · see citing works

Use of plastic waste as a fuel in the co-pyrolysis of biomass. Part I: The effect of the addition of plastic waste on the process and products

Sajdak, M., & Muzyka, R. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.011 · Cited by 123 · see citing works

Upgraded fuel from microwave assisted pyrolysis of waste tire

Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2013) · Fuel · doi:10.1016/j.fuel.2013.07.058 · Cited by 121 · see citing works

Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic

Kunwar, B., Moser, B. R., Chandrasekaran, S. R., Rajagopalan, N., & Sharma, B. K. (2016) · Energy · doi:10.1016/j.energy.2016.06.024 · Cited by 120 · see citing works

Identification of the coke deposited on an HZSM-5 zeolite catalyst during the sequenced pyrolysis–cracking of HDPE

Ibáñez, M., Artetxe, M., López, G., Elordi, G., Bilbao, J., Olazar, M., & Castaño, P. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.11.023 · Cited by 119 · see citing works

Catalytic flash pyrolysis of HDPE in a fluidized bed reactor for recovery of fuel-like hydrocarbons

Hernández, M. D. R., García, A. N. J., & Marcilla, A. F. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.03.009 · Cited by 117 · see citing works

Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor

Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2002999 · Cited by 117 · see citing works

Conversion of low density polyethylene into petrochemical feedstocks using a continuous screw kiln reactor

Serrano, D. P., Aguado, J., Escola, J. M., et al. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00153-4 · Cited by 116 · see citing works

Conversion of waste plastics into fuels Recycling polyethylene in FCC

de la Puente, G. (2002) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(01)00287-9 · Cited by 116 · see citing works

HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production

Erkiaga, A., López, G., Barbarias, I., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.10.010 · Cited by 115 · see citing works

Recycling of waste plastics into fuels. LDPE conversion in FCC

Passamonti, F. J., & Sedran, U. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.06.020 · Cited by 115 · see citing works

Petrochemical feedstock by thermal cracking of plastic waste

Angyal, A., Miskolczi, N., & Bartha, L. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.12.031 · Cited by 115 · see citing works

Catalytic degradation of high density polyethylene over mesoporous and microporous catalysts in a fluidised-bed reactor

Lin, Y., Yang, M.-H., Yeh, T.-S., et al. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.02.015 · Cited by 115 · see citing works

Thermal and catalytic cracking of polyethylene under mild conditions

van Grieken, R., Serrano, D. P., Aguado, J., et al. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00145-5 · Cited by 111 · see citing works

Transformation of Several Plastic Wastes into Fuels by Catalytic Cracking

Arandes, J. M., Abajo, I., López-Valerio, D., Fernández, I., Azkoiti, M. J., Olazar, M., & Bilbao, J. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970096e · Cited by 110 · see citing works

Mixed-waste pyrolysis of biomass and plastics waste – A modelling approach to reduce energy usage

Oyedun, A. O., Gebreegziabher, T. G., Ng, D. K. S., & Hui, C. W. (2014) · Energy · doi:10.1016/j.energy.2014.05.063 · Cited by 109 · see citing works

Catalytic degradation of polymers: Part II—Degradation of polyethylene

Beltrame, P. L., Carniti, P., Audisio, G., et al. (1989) · Polymer Degradation and Stability · doi:10.1016/0141-3910(89)90074-8 · Cited by 109 · see citing works

Coal and plastic waste co-pyrolysis by thermal analysis–mass spectrometry

Melendi-Espina, S., Álvarez, R., Diez, M. A., et al. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.03.024 · Cited by 108 · see citing works

Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor

Elordi, G., Olazar, M., Artetxe, M., Castaño, P., & Bilbao, J. (2011) · Applied Catalysis A General · doi:10.1016/j.apcata.2011.12.011 · Cited by 107 · see citing works

Conversion of Polyethylene into Gasoline-Range Fuels by Two-Stage Catalytic Degradation Using Silica−Alumina and HZSM-5 Zeolite

Uemichi, Y., Nakamura, J., Itoh, T., Sugioka, M., Garforth, A. A., & Dwyer, J. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980341+ · Cited by 107 · see citing works

Cracking catalysts used as fluidized bed material in the Hamburg pyrolysis process

Mertinkat, J., Kirsten, A., Predel, M., & Kaminsky, W. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00103-x · Cited by 104 · see citing works

Fluidized bed pyrolysis of a recycled polyethylene

Mastellone, M. L., Perugini, F., Ponte, M., & Arena, U. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00052-6 · Cited by 103 · see citing works

Study of the slow batch pyrolysis of mixtures of plastics, tyres and forestry biomass wastes

Paradela, F., Pinto, F., Ramos, A. M., Gulyurtlu, I., & Cabrita, I. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.003 · Cited by 103 · see citing works

A process study on the pyrolysis of waste polyethylene

Zeaiter, J. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.028 · Cited by 102 · see citing works

Retrieving and converting energy from polymers: deployable technologies and emerging concepts

Baytekin, B., Baytekin, H. T., & Grzybowski, B. A. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41360h · Cited by 101 · see citing works

Thermal degradation of poly(methyl methacrylate) polymers: Kinetics and recovery of monomers using a fluidized bed reactor

Kang, B.-S., Kim, S. G., & Kim, J.-S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.07.001 · Cited by 100 · see citing works

Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor

Elordi, G., Olazar, M., Aguado, R., et al. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.010 · Cited by 99 · see citing works

Recycling poly-(methyl methacrylate) by pyrolysis in a conical spouted bed reactor

López, G., Artetxe, M., Amutio, M., Elordi, G., Aguado, R., Olazar, M., & Bilbao, J. (2010) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2010.08.002 · Cited by 99 · see citing works

Polymer degradation to fuels over microporous catalysts as a novel tertiary plastic recycling method

Gobin, K., & Manos, G. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00272-6 · Cited by 99 · see citing works

Hydrocarbon fuels produced by catalytic pyrolysis of hospital plastic wastes in a fluidizing cracking process

Lin, H.-T., Huang, M., Luo, J.-W., et al. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.03.016 · Cited by 97 · see citing works

Pyrolysis and in-line catalytic steam reforming of polystyrene through a two-step reaction system

Barbarias, I., López, G., Artetxe, M., Arregi, A., Santamaria, L., Bilbao, J., & Olazar, M. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.10.006 · Cited by 96 · see citing works

Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln

Li, A., Li, X., Li, S., et al. (1999) · Energy · doi:10.1016/s0360-5442(98)00095-4 · Cited by 95 · see citing works

Performance of a conical spouted bed pilot plant for bio-oil production by poplar flash pyrolysis

Makibar, J., Fernandez-Akarregi, A. R., Amutio, M., López, G., & Olazar, M. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.03.011 · Cited by 94 · see citing works

Catalytic degradation of polyethylene using thermal gravimetric analysis and a cycled-spheres-reactor

Schirmer, J., Kim, J., & Klemm, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00197-2 · Cited by 94 · see citing works

Thermally stable phosphorus and nickel modified ZSM-5 zeolites for catalytic co-pyrolysis of biomass and plastics

Yao, W., Li, J., Feng, Y., Wang, W., Zhang, X., Chen, Q., Komarneni, S., & Wang, Y. (2015) · RSC Advances · doi:10.1039/c5ra02947c · Cited by 93 · see citing works

Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed

Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018274 · Cited by 92 · see citing works

Defluidization phenomena during the pyrolysis of two plastic wastes

Arena, U., & Mastellone, M. L. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00533-3 · Cited by 91 · see citing works

Novel three-phase steam–air plasma torch for gasification of high-caloric waste

Rutberg, P. G., Кузнецов, В. А., Serba, E. O., Popov, S. D., Суров, А. В., Nakonechny, G. V., & Nikonov, A. V. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.03.052 · Cited by 87 · see citing works

An experimental study on bio-oil production from co-pyrolysis with potato skin and high-density polyethylene (HDPE)

Önal, E. P., Uzun, B. B., & Pütün, A. E. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.06.010 · Cited by 87 · see citing works

Enhanced oxidation of toxic effluents using simultaneous ozonation and activated carbon treatment

Zaror, C. A. (1997) · Journal of Chemical Technology & Biotechnology · doi:10.1002/(sici)1097-4660(199709)70:1 · Cited by 85 · see citing works

Ultrapyrolytic cracking of polyethylene — a high yield recycling method

Sodero, S. F., Berruti, F., & Behie, L. A. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(96)00156-x · Cited by 84 · see citing works

Thermo-catalytic pyrolysis of waste polyethylene bottles in a packed bed reactor with different bed materials and catalysts

Obeid, F., Zeaiter, J., Al-Muhtaseb, A. H., & Bouhadir, K. H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.05.075 · Cited by 84 · see citing works

Pyrolysis of polyolefins with steam to yield olefins

Simon, C. M., Kaminsky, W., & Schlesselmann, B. (1996) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00950-3 · Cited by 83 · see citing works

The effect of pore shape on the catalytic performance of zeolites in the liquid-phase degradation of HDPE

Park, J. W., Kim, J., & Seo, G. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00059-9 · Cited by 82 · see citing works

H-ZSM-11 and Zn-ZSM-11 zeolites and their applications in the catalytic transformation of LDPE

Renzini, M. S., Sedran, U. A., & Pierella, L. B. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.06.008 · Cited by 81 · see citing works

Co-pyrolysis of oil shale and plastics: Influence of pyrolysis parameters on the product yields

Aboulkas, A., Makayssi, T., Bilali, L., et al. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.001 · Cited by 80 · see citing works

Catalytic efficiency of some novel nanostructured heterogeneous solid catalysts in pyrolysis of HDPE

Ahmad, I. K., Khan, M. I., Ishaq, M., Khan, H., Gul, K., & Ahmad, W. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.009 · Cited by 80 · see citing works

Catalytic degradation of high density polyethylene: an evaluation of mesoporous and microporous catalysts using thermal analysis

Garforth, A., Fiddy, S., Lin, Y.-H., Ghanbari-Siakhali, A., Sharratt, P. N., & Dwyer, J. (1997) · Thermochimica Acta · doi:10.1016/s0040-6031(96)03145-0 · Cited by 79 · see citing works

Depolymerization of Polypropylene in an Induction-Coupled Plasma (ICP) Reactor

Guddeti, R. R., Knight, R., & Grossmann, E. D. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9906868 · Cited by 79 · see citing works

Temperature and time influence on the waste plastics pyrolysis in the fixed bed reactor

Papuga, S., Gvero, P. M., & Vukić, L. (2015) · Thermal Science · doi:10.2298/tsci141113154p · Cited by 79 · see citing works

Novel Process for Recycling Waste Plastics To Fuel Gas Using a Moving-Bed Reactor

Kodera, Y., Ishihara, Y., & Kuroki, T. (2005) · Energy & Fuels · doi:10.1021/ef0502655 · Cited by 78 · see citing works

Stability of ZSM-11 and BETA zeolites during the catalytic cracking of low-density polyethylene

Renzini, M. S., Lerici, L., Sedran, U. A., & Pierella, L. B. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.008 · Cited by 77 · see citing works

Study of the gases obtained in thermal and catalytic flash pyrolysis of HDPE in a fluidized bed reactor

Hernández, M. D. R., García, A. N. J., & Marcilla, A. F. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2005.03.001 · Cited by 74 · see citing works

Evaluation of char fuel ratio in municipal pyrolysis waste

Matsuzawa, Y., Ayabe, M., Nishino, J., Kubota, N., & 茂木, 幹. (2004) · Fuel · doi:10.1016/j.fuel.2004.02.006 · Cited by 74 · see citing works

Catalytic coprocessing of coal and petroleum residues with waste plastics to produce transportation fuels

Ali, M. F., Ahmed, S., & Qureshi, M. S. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.01.006 · Cited by 74 · see citing works

Co-pyrolysis of waste polyolefins with waste motor oil

Uçar, S., Özkan, A. R., & Karagöz, S. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.01.013 · Cited by 74 · see citing works

Deactivation Behaviors of Zeolite and Silica−Alumina Catalysts in the Degradation of Polyethylene

Uemichi, Y., Hattori, M., Itoh, T., et al. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970605c · Cited by 73 · see citing works

Enhanced styrene recovery from waste polystyrene pyrolysis using response surface methodology coupled with Box–Behnken design

Mo, Y., Zhao, L., Wang, Z. J., Chen, C.-L., Tan, G.-Y. A., & Wang, J. (2014) · Waste Management · doi:10.1016/j.wasman.2014.01.005 · Cited by 73 · see citing works

Catalytic coprocessing of waste plastics and petroleum residue into liquid fuel oils

Siddiqui, M. N., & Redhwi, H. H. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.05.002 · Cited by 73 · see citing works

From plastics to jet fuel range alkanes via combined catalytic conversions

Zhang, X., Lei, H., Zhu, L., Qian, M., Yadavalli, G., Wu, J. Q., & Chen, S. (2016) · Fuel · doi:10.1016/j.fuel.2016.10.015 · Cited by 73 · see citing works

Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene

Saad, J. M., Nahil, M. A., & Williams, P. T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.027 · Cited by 72 · see citing works

A novel Ni–Mg–Al–CaO catalyst with the dual functions of catalysis and CO2 sorption for H2 production from the pyrolysis–gasification of polypropylene

Wu, C., & Williams, P. T. (2009) · Fuel · doi:10.1016/j.fuel.2009.10.020 · Cited by 72 · see citing works

Co-pyrolysis of wood biomass and synthetic polymers mixtures

Sharypov, V. I., Beregovtsova, N. G., Кузнецов, Б. Н., et al. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2005.12.006 · Cited by 70 · see citing works

Low temperature conversion of plastic waste into light hydrocarbons

Shah, S. H., Khan, Z. M., Raja, I. A., Mahmood, Q., Bhatti, Z. A., Khan, J., Farooq, A., Rashid, N., & Wu, D. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.01.134 · Cited by 70 · see citing works

Production of Waxes and Tars from the Continuous Pyrolysis of High Density Polyethylene. Influence of Operation Variables

Berrueco, C., Mastral, J. F., Esperanza, E., & Ceamanos, J. (2002) · Energy & Fuels · doi:10.1021/ef020008p · Cited by 70 · see citing works

Pyrolysis of Mixed Plastics in a Fluidized Bed of Hard Burnt Lime

Grause, G., Matsumoto, S., Kameda, T., & Yoshioka, T. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie102412h · Cited by 70 · see citing works

Conversion of Polyethylene Blended with VGO to Transportation Fuels by Catalytic Cracking

Ng, S. (1995) · Energy & Fuels · doi:10.1021/ef00050a003 · Cited by 69 · see citing works

Catalytic Cracking of LDPE Dissolved in Benzene Using Nickel-Impregnated Zeolites

Wong, S. L., Ngadi, N., Abdullah, T. A. T., et al. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04518 · Cited by 66 · see citing works

Thermal conversion of waste polyolefins to the mixture of hydrocarbons in the reactor with molten metal bed

Stelmachowski, M. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.02.035 · Cited by 65 · see citing works

Fuel properties of the oils produced from the pyrolysis of commonly-used polymers: Effect of fractionating column

Heydariaraghi, M., Ghorbanian, S. A., Hallajisani, A., & Salehpour, A. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.08.010 · Cited by 64 · see citing works

Comparison between the Pyrolysis of Two Types of Polyethylenes in a Fluidized Bed Reactor

Conesa, J. A., Font, R., & Marcilla, A. F. (1997) · Energy & Fuels · doi:10.1021/ef960098w · Cited by 63 · see citing works

Catalytic degradation of low-density polyethylene and polypropylene using modified ZSM-5 zeolites

Zhou, Q., Li, Z., Wang, Y., Zhao, G.-M., & Wang, B. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.01.007 · Cited by 63 · see citing works

Product distribution modelling in the thermal pyrolysis of high density polyethylene

Elordi, G., López, G., Olazar, M., et al. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.101 · Cited by 62 · see citing works

Catalytic Conversion of Polyolefins to Chemicals and Fuels over Various Cracking Catalysts

Lin, Y., Sharratt, P., Garforth, A. A., et al. (1998) · Energy & Fuels · doi:10.1021/ef970233k · Cited by 61 · see citing works

Catalytic degradation of polyolefins over hexagonal mesoporous silica: Effect of aluminum addition

Chaianansutcharit, S., Katsutath, R., Chaisuwan, A., Bhaskar, T., Nigo, A., Muto, A., & Sakata, Y. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.04.009 · Cited by 61 · see citing works

Catalytic Cracking of Waxes Produced by the Fast Pyrolysis of Polyolefins

Arandes, J. M., Torre, I., Castaño, P., et al. (2007) · Energy & Fuels · doi:10.1021/ef060471s · Cited by 60 · see citing works

New energy value chain through pyrolysis of hospital plastic waste

Paraschiv, M., Kuncser, R., Tazerout, M. L., & Prisecaru, T. I. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.070 · Cited by 59 · see citing works

Catalytic Air Gasification of Plastic Waste (Polypropylene) in a Fluidized Bed. Part II: Effects of Some Operating Variables on the Quality of the Raw Gas Produced Using Olivine as the In-Bed Material

Toledo, J. M., Aznar, M., & Sancho, J. A. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200145p · Cited by 59 · see citing works

Isothermal co-pyrolysis of hazelnut shell and ultra-high molecular weight polyethylene: The effect of temperature and composition on the amount of pyrolysis products

Çaǧlar, A., & Aydınlı, B. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.08.002 · Cited by 58 · see citing works

Pyrolysis of plastic waste and scrap tyres in a fluid bed reactor

Kaminsky, W. (1980) · Resource Recovery and Conservation · doi:10.1016/0304-3967(80)90001-3 · Cited by 58 · see citing works

Product distribution from catalytic degradation of polyethylene over H-gallosilicate

Takuma, K., Uemichi, Y., & Ayame, A. (2000) · Applied Catalysis A General · doi:10.1016/s0926-860x(99)00399-3 · Cited by 57 · see citing works

Liquefaction of municipal waste plastics in VGO over acidic and non-acidic catalysts☆

Karagöz, S., Karayıldırım, T., Uçar, S., et al. (2002) · Fuel · doi:10.1016/s0016-2361(02)00250-8 · Cited by 56 · see citing works

Optimizing carbon efficiency of jet fuel range alkanes from cellulose co-fed with polyethylene via catalytically combined processes

Zhang, X., Lei, H., Zhu, L., Zhu, X., Qian, M., Yadavalli, G., Yan, D., Wu, J. Q., & Chen, S. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.04.086 · Cited by 56 · see citing works

Depolymerization of Polyethylene Using Induction-Coupled Plasma Technology

Guddeti, R. R., Knight, R., & Grossmann, E. D. (2000) · Plasma Chemistry and Plasma Processing · doi:10.1023/a:1006969710410 · Cited by 55 · see citing works

Conversion of polymers to fuels in a refinery stream

Uçar, S., Karagöz, S., Karayıldırım, T., et al. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00215-4 · Cited by 54 · see citing works

Tertiary recycling of polyethylene waste by fluidised-bed reactions in the presence of various cracking catalysts

Lin, Y., & Yang, M.-H. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.06.004 · Cited by 54 · see citing works

Beyond Mechanical Recycling: Giving New Life to Plastic Waste

Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., van Harmelen, T., de Wild, P., van der Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915651 · Cited by 1,905 · see citing works

Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization

Zhang, F., Zeng, M., Yappert, R. D., Sun, J., Lee, Y.-H., LaPointe, A. M., Peters, B., Abu-Omar, M. M., & Scott, S. L. (2020) · Science · doi:10.1126/science.abc5441 · Cited by 882 · see citing works

Recent advances in the gasification of waste plastics. A critical overview

Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852 · see citing works

Closed-loop recycling of polyethylene-like materials

Häußler, M., Eck, M., Rothauer, D., & Mecking, S. (2021) · Nature · doi:10.1038/s41586-020-03149-9 · Cited by 753 · see citing works

Expanding plastics recycling technologies: chemical aspects, technology status and challenges

Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616 · see citing works

Plastic waste to fuels by hydrocracking at mild conditions

Liu, S., Kots, P. A., Vance, B. C., Danielson, A., & Vlachos, D. G. (2021) · Science Advances · doi:10.1126/sciadv.abf8283 · Cited by 583 · see citing works

A review on catalytic pyrolysis of plastic wastes to high-value products

Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538 · see citing works

Pyrolysis technology for plastic waste recycling: A state-of-the-art review

Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485 · see citing works

From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study

Gu, F., Guo, J., Zhang, W., Summers, P. A., & Hall, P. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.05.278 · Cited by 423 · see citing works

A review on hydrothermal carbonization of biomass and plastic wastes to energy products

Shen, Y. (2020) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105479 · Cited by 427 · see citing works

Why is recycling of postconsumer plastics so challenging?

Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385 · see citing works

Pyrolysis of plastic species: A review of resources and products

Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315 · see citing works

Impact of temperature on the activity of Fe-Ni catalysts for pyrolysis and decomposition processing of plastic waste

Yao, D., Li, H., Dai, Y., & Wang, C.-H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127268 · Cited by 241 · see citing works

Carbonization: A feasible route for reutilization of plastic wastes

Chen, S., Liu, Z., Jiang, S., & Hou, H. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.136250 · Cited by 213 · see citing works

Tire pyrolysis char: Processes, properties, upgrading and applications

Gao, N., Wang, F., Quan, C., Santamaria, L., Lopez, G., & Williams, P. T. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101022 · Cited by 188 · see citing works

Mass production of hierarchically porous carbon nanosheets by carbonizing “real-world” mixed waste plastics toward excellent-performance supercapacitors

Wen, Y., Kierzek, K., Chen, X., Gong, J., Liu, J., Niu, R., Mijowska, E., & Tang, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.006 · Cited by 127 · see citing works

Mechanism of synergistic effects and kinetics analysis in catalytic co-pyrolysis of water hyacinth and HDPE

Zhong, S., Zhang, B., Liu, C., & Shujaa aldeen, A. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113717 · Cited by 93 · see citing works

On the use of plastic precursors for preparation of activated carbons and their evaluation in CO2 capture for biogas upgrading: a review

Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45 · see citing works

Upcycling of real-world HDPE plastic wastes into high-purity methane and hierarchical porous carbon materials: Influence of plastics additives

Zhou, X., He, P., Peng, W., Lü, F., Shao, L., & Zhang, H. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.109327 · Cited by 29 · see citing works

Full Utilization of Hard-to-Recycle Mixed Plastic Waste by Conversion toward Pyrolysis Oil and BTX Aromatics on a Pilot Scale

van Akker, M., Strien, J. R. J., Genuino, H. C., van Eijk, M. C. P., Schenk, N. J., Heeres, H. J., & Deuss, P. J. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c05631 · Cited by 25 · see citing works

Graphene triggered catalytic attack on plastic waste produces graphitic shell encapsulation on cobalt nanoparticles for ferromagnetism and stable Li ⁺ ion storage

Palanisamy, M., Perumal, R., Zhang, D., Wang, H., Maximova, O., Rokhinson, L., & Pol, V. G. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01354a · Cited by 5 · see citing works

THE DEVELOPMENT OF A PILOT ORTHOFLOW CATALYTlC CRACKING UNIT AND ITS FEATURES

Jinse, G. (1994)

Use desalting for FCC feedstocks

Harris, J. (1996) · Hydrocarbon processing · Cited by 13 · see citing works

The Use of MCM-22 as a Cracking Zeolitic Additive for FCC

Corma, A., & Martı́nez-Triguero, J. (1997) · Journal of Catalysis · doi:10.1006/jcat.1997.1474 · Cited by 133 · see citing works

Simulating experiments on catalytic cracking and thermal cracking reactions in riser reactor

Hai, Z. (2006) · Zhongguo Shiyou Daxue xuebao. Ziran kexue ban

Study on Cracking of Regenerator in Catalytic Cracking Unit

Wang, F. (2012) · Guangzhou Chemical Industry