The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Experimental analysis of a photovoltaic/thermoelectric generator using cobalt oxide nanofluid and phase change material heat sink
Abstract
Abstract Nowadays, photovoltaic panels have been known as effective devices to harness solar energy. These panels mainly convert the UV and visible areas of the solar spectrum into electricity and the rest of the energy is dissipated. One of the favorable methods to take advantage of such dissipated heat is to combine thermoelectric generators (TEG) utilizing the IR area of the solar radiation with photovoltaic panels. Having the different and opposite impact on the efficiency of thermal photovoltaic cells (PV/T) and thermoelectric generators (TEG), the system operating temperature appears as a critical parameter in the productivity of a PV/T-TEG hybrid unit. In the present study, a novel heat sink for a PV/T-TEG hybrid system is introduced. The effectiveness of simultaneous usage of the Co3O4/water nanofluid and the improved phase change material (paraffin wax/Alumina powder) as a cooling method on the performance of the PV/T-TEG is examined throughout an experimental study. Then, the overall electrical, thermal and exergy efficiency of such a system is compared to the units with divers working fluids including water and 0.25%, 0.5%, and 1% nanofluid and the unit consisting of 1% nanofluid with non-enhanced PCM cooling method. The results reveal that using 1% nanofluid with enhanced PCM, as a cooling method, would improve the overall electrical efficiency by 12.28% compared to water cooling technique. Also, an increase of 11.6% in the exergy efficiency of the PV/T-TEG is observed in comparison with PV/T-TEG with the water cooling method. Hence, it could be concluded that the combination of this unit could contribute to harnessing solar energy more efficiently, compared to solo photovoltaic panels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cui, T., Xuan, Y., & Li, Q. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.008 · Cited by 245
Cited by
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Nakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Kandilli, C., & Uzel, M. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-10574-z · Cited by 15
Metadata
- Authors
- Rajaee, F., Rad, M. A. V., Kasaeian, A., Mahian, O., & Yan, W.-M.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 212
- Pages
- 112780
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W3015903439
- Cited by
- 185
- References
- 1
- FWCI
- 5.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.