Independent parallel pyrolysis kinetics of cellulose, hemicelluloses and lignin at various heating rates analyzed by evolutionary computation
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
The kinetics of lignocellulosic biomass pyrolysis is beneficial for reactor design to efficiently produce biofuel and bioenergy. Pyrolysis is a well-developed thermochemical process that converts biomass into valuable gaseous products, bio-oils, and solid products. To understand the complex pyrolysis process of lignocellulosic biomass, three model components of cellulose, hemicelluloses (xylan), and lignin were pyrolyzed using a thermogravimetric analyzer. An independent parallel reaction (IPR) kinetic model was optimized using a particle swarm optimization (PSO) algorithm. The IPR kinetic models of cellulose, hemicelluloses, and lignin could be modeled with 1 pseudo-reaction, 4 pseudo-reactions, and 5 pseudo-reactions, respectively, and good fit qualities higher than 95% can be achieved (except a few cases for lignin). Four different heating rates of 1, 5, 20, and 40 °C·min−1 were applied to examine the effect of heating rate on the pyrolysis process. When increasing the heating rate, the derivative thermogravimetric (DTG) peaks shifted to a higher temperature range, stemming from the thermal lag between the samples and heating environment. Overall, the temperature ranges of the thermal decomposition for cellulose, hemicelluloses, and lignin were within 269–394, 170–776, and 127–791 °C, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Kinetics and Mechanism of Cellulose Pyrolysis
Lin, Y.-C., Cho, J., Tompsett, G. A., Westmoreland, P. R., & Huber, G. W. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906702p · Cited by 698
Self-citationThermochemical conversion of microalgal biomass into biofuels: A review
Chen, W.-H., Lin, B.-J., Huang, M.-Y., & Chang, J.-S. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.050 · Cited by 579
Self-citationVolatile production from pyrolysis of cellulose, hemicellulose and lignin
Zhao, C., Jiang, E., & Chen, A. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.08.004 · Cited by 458
Detailed kinetic modeling of the thermal degradation of lignins
Faravelli, T., Frassoldati, A., Migliavacca, G., & Ranzi, E. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.10.018 · Cited by 376
Torrefaction, pyrolysis and two-stage thermodegradation of hemicellulose, cellulose and lignin
Chen, W.-H., Wang, C.-W., Ong, H. C., Show, P. L., & Hsieh, T.-H. (2019) · Fuel · doi:10.1016/j.fuel.2019.116168 · Cited by 358
Self-citationWannapeera, J., Fungtammasan, B., & Worasuwannarak, N. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.010 · Cited by 348
Lignin depolymerization into aromatic monomers over solid acid catalysts
Deepa, A. K., & Dhepe, P. L. (2015) · ACS Catalysis · doi:10.1021/cs501371q · Cited by 346
Yeo, J. Y., Chin, B. L. F., Tan, J. K., & Loh, Y. S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.12.003 · Cited by 304
How to determine consistent biomass pyrolysis kinetics in a parallel reaction scheme
Anca-Couce, A., Berger, A., & Zobel, N. (2014) · Fuel · doi:10.1016/j.fuel.2014.01.014 · Cited by 229
Slow pyrolysis of prot, alkali and dealkaline lignins for production of chemicals
Biswas, B., Singh, R., Kumar, J., Khan, A. A., Krishna, B. B., & Bhaskar, T. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.01.131 · Cited by 111
Cited by
The future of hydrogen: Challenges on production, storage and applications
Rasul, M. G., Hazrat, M. A., Sattar, M. A., Jahirul, M. I., & Shearer, M. J. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116326 · Cited by 856
Escalante, J., Chen, W.-H., Tabatabaei, M., Hoang, A. T., Kwon, E. E., Andrew Lin, K.-Y., & Saravanakumar, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112914 · Cited by 414
Self-citationLi, C., Sun, Y., Dong, D., Gao, G., Zhang, S., Wang, Y., Xiang, J., Hu, S., Mortaza, G., & Hu, X. (2021) · Energy · doi:10.1016/j.energy.2021.120442 · Cited by 122
Metadata
- Authors
- Chen, W.-H., Eng, C. F., Lin, Y.-Y., & Bach, Q.-V.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 221
- Pages
- 113165
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W3040980836
- Cited by
- 158
- References
- 14
- FWCI
- 5.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.