Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The operation and performance of a SOFC (solid oxide fuel cell) stack on biomass syn-gas from a biomass gasification CHP (combined heat and power) plant is investigated. The objective of this work is to develop a model of a biomass-SOFC system capable of predicting performance under diverse operating conditions. The tubular SOFC technology is selected. The SOFC stack model, equilibrium type based on Gibbs free energy minimisation, is developed using Aspen Plus. The model performs heat and mass balances and considers ohmic, activation and concentration losses for the voltage calculation. The model is validated against data available in the literature for operation on natural gas. Operating parameters are varied; parameters such as fuel utilisation factor (Uf), current density (j) and STCR (steam to carbon ratio) have significant influence. The results indicate that there must be a trade-off between voltage, efficiency and power with respect to j and the stack should be operated at low STCR and high Uf. Operation on biomass syn-gas is compared to natural gas operation and as expected performance degrades. The realistic design operating conditions with regard to performance are identified. High efficiencies are predicted making these systems very attractive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
NEW METHOD FOR PREDICTION OF BINARY GAS-PHASE DIFFUSION COEFFICIENTS
Fuller, E. N., Schettler, P. D., & Giddings, J. C. (1966) · Industrial & Engineering Chemistry · doi:10.1021/ie50677a007 · Cited by 2,515
Cited by
An overview of advances in biomass gasification
Sikarwar, V. S., Zhao, M., Clough, P., Yao, J., Zhong, X., Memon, M. Z., Shah, N., Anthony, E. J., & Fennell, P. S. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00935b · Cited by 1,258
New concepts in biomass gasification
Heidenreich, S., & Foscolo, P. U. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.06.002 · Cited by 709
Renewable energy and energy storage systems
Olabi, A. G. (2017) · Energy · doi:10.1016/j.energy.2017.07.054 · Cited by 360
Catalán-Martínez, D., Domine, M. E., & Serra, J. M. (2018) · Fuel · doi:10.1016/j.fuel.2017.10.014 · Cited by 26
“For these reasons and in order to optimize the yield of gases and liquids products, the studies of biomass transformation and valorisation through thermochemical routes are continuously growing during the last years [13-29].”
Background
Metadata
- Authors
- Doherty, W., Reynolds, A., & Kennedy, D.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2010-12
- Volume
- 35
- Issue
- 12
- Pages
- 4545-4555
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2073756608
- Cited by
- 205
- References
- 1
- FWCI
- 3.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.