The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A comprehensive study of properties of paraffin phase change materials for solar thermal energy storage and thermal management applications
Abstract
Paraffins are useful as phase change materials (PCMs) for thermal energy storage (TES) via their melting transition, Tmpt. Paraffins with Tmpt between 30 and 60 °C have particular utility in improving the efficiency of solar energy capture systems and for thermal buffering of electronics and batteries. However, there remain critical knowledge gaps concerning the properties of paraffin PCMs, including their long-term reliability and chemical compatibility. Therefore, we have undertaken a thorough, comprehensive study of the thermophysical properties, long-term stability and chemical compatibility of six widely useful paraffin PCMs. The PCMs investigated include three pure alkanes, nonadecane, eicosane, docosane, and three commercial blends of paraffin waxes. For each PCM, we accurately determined Tmpt, the latent heat of fusion, the density of the solid phase and the temperature dependences of the heat capacity and thermal conductivity. For the first time, we show the thermal stability of the PCMs after 3000 melt-freeze cycles, and their chemical compatibilities with 17 different metallic and plastic materials used for encapsulation and in composites and fillers. These results provide necessary information to improve energy modeling and analysis for existing and emerging TES applications, and guide the selection of reliable paraffin PCMs and encapsulation materials for such applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Cited by
Potential of macroencapsulated PCM for thermal energy storage in buildings : a comprehensive review
Rathore, P. K. S., & Shukla, S. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.221 · Cited by 396
Tyagi, V. V., Chopra, K., Sharma, R. K., Pandey, A. K., Tyagi, S. K., Ahmad, M. S., Sarı, A., & Kothari, R. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111392 · Cited by 263
Akhmetov, B., Navarro, M. E., Seitov, A., Kaltayev, A., Bakenov, Z., & Ding, Y. (2019) · Solar Energy · doi:10.1016/j.solener.2019.10.015 · Cited by 65
Functionally graded optimisation of adsorption systems with phase change materials
Prado, D. S., Amigo, R. C. R., Hewson, R. W., & Silva, E. C. N. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02918-y · Cited by 7
Metadata
- Authors
- Kahwaji, S., Johnson, M. B., Kheirabadi, A. C., Groulx, D., & White, M. A.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 162
- Pages
- 1169-1182
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2886410468
- Cited by
- 214
- References
- 2
- FWCI
- 11.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.