The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
The catalytic effect of inherent and adsorbed metals on the fast/flash pyrolysis of biomass: A review
Open accessAbstract
Relevant literature which deals with the presence of metals during the catalytic pyrolysis of biomass is reviewed. Only those conditions where the metal was in intimate contact with the biomass components are included. Cellulose, hemicellulose and lignin all fuse during the early stages of pyrolytic heating and the dehydration and decomposition processes begin during this transition. Hemicelluloses such as xylan are more labile and difficult to isolate, whereas both cellulose and lignin produce mostly bio-oils when demineralised and flash pyrolysed. The dominant primary products from ‘pure’ cellulose are anhydrosugars as well as smaller oxygenates. Lignin gives aromatics based on the syringol and guiacol molecules. The alkali and alkaline earth metals are found to curtail the yield of bio-oil and modify product distribution, even in the low concentrations naturally found in biomass. All other metals act to catalyse cross-linking reactions, with the nickel and zinc most studied. The electropositivity of the metal tends to correlate with the extent of catalytic activity. The presence of metals causes little change to the production of gases, but more char is formed at the expense of liquids. If the aim of pyrolysis is bio-oil for fuel, prewashing of biomass to remove metals is beneficial.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
A review on biomass as a fuel for boilers
Saidur, R., Abdelaziz, E. A., Demirbas, A., Hossain, M. S., & Mekhilef, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.015 · Cited by 1,623
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Long, J., Song, H., Jun, X., Sheng, S., Lun-shi, S., Kai, X., & Yao, Y. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.051 · Cited by 196
Investigation on catalytic pyrolysis of pine sawdust: Catalyst screening by Py-GC-MIP-AED
Torri, C., Reinikainen, M., Lindfors, C., Fabbri, D., Oasmaa, A., & Kuoppala, E. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.02.005 · Cited by 141
Dalluge, D. L., Kim, K. H., & Brown, R. C. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.07.011 · Cited by 88
Cited by
A review of the effects of alkali and alkaline earth metal species on biomass gasification
Yu, J., Guo, Q., Gong, Y., Ding, L., Wang, J., & Yu, G. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106723 · Cited by 347
Leng, E., Guo, Y., Chen, J., Liu, S., E, J., & Xue, Y. (2022) · Fuel · doi:10.1016/j.fuel.2021.122102 · Cited by 286
Khosravi, A., Zheng, H., Liu, Q., Hashemi, M., Tang, Y., & Xing, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133142 · Cited by 286
Critical review of the role of ash content and composition in biomass pyrolysis
Puri, L., Hu, Y., & Naterer, G. (2024) · Frontiers in Fuels · doi:10.3389/ffuel.2024.1378361 · Cited by 226
Ding, Y., Zhang, W., Yu, L., & Lu, K. (2019) · Energy · doi:10.1016/j.energy.2019.04.030 · Cited by 220
Metadata
- Authors
- Nzihou, A., Stanmore, B., Lyczko, N., & Minh, D. P.
- Venue
- Energy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 170
- Pages
- 326-337
- ISSN
- 0360-5442 (ISSN-L)
- OpenAlex
- W2908063997
- Cited by
- 164
- References
- 7
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The catalytic effect of inherent and adsorbed metals on the fast/flash pyrolysis of biomass: A review. https://app.cochat.ai/papers/10.1016/j.energy.2018.12.174
- The paper
- Nzihou, A., Stanmore, B., Lyczko, N., & Minh, D. P. (2019). The catalytic effect of inherent and adsorbed metals on the fast/flash pyrolysis of biomass: A review. Energy. https://doi.org/10.1016/j.energy.2018.12.174
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.