Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; its reference list is not available.

The influence of KCl on biomass ash melting behaviour and high-temperature corrosion of low-alloy steel

Abstract

The main aim of this work was to determine the influence of KCl-rich ash deposits on 10CrMo9-10 steel oxidation rate. Two agricultural biomass samples: oat and rye straw, clean and doped with KCl were tested in this study. The addition of KCl does not decrease the melting temperature of the ash when KCl is not incorporated with mineral matter components. Corrosion experiments were performed at 550 °C and 600 °C, with corrosion coupons covered with real and synthetic biomass ash under oxidising conditions. The nonuniform distribution of KCl in ash affected the results and the effect of potassium concentration on oxidation rate was not observed in all cases. More severe influence of ash rich in KCl was observed at lower temperature, the reason is lower protective oxide scale formation rate and higher influence of ashes on steel material and scale. The temperature increase by 50 °C doubled the corrosion rate. At 550 °C KCl was most aggressive salt, but at 600 °C the influence of eutectic mixture KCl+K2SO4 was the highest. Even at lower temperature thermal decomposition of K2CO3 was observed affecting the results. It might be concluded that temperature and eutectic mixture formation are essential parameters in corrosion prediction.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.energy.2019.116062

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

No citation lists for this paper

No citation lists for this paper yet — checked again daily.

References 30 · Cited by 46

Research works printed but not linked: 1

  1. Janz, 1979, Physical properties data compilations relevant to energy storage. II. Molten salts: data on single and multi-components salt systems, Natl. Bur. Stand.

Metadata

Authors
Mlonka-Mędrala, A., Gołombek, K., Buk, P., Cieślik, E., & Nowak, W.
Affiliations
  • AGH University of Krakow (PL)
  • Silesian University of Technology (PL)
Corresponding author
Mlonka-Mędrala, Agata
Venue
Energy
Publisher
Elsevier BV
Published
2019-12
Volume
188
Pages
116062
ISSN
0360-5442 (ISSN-L)
OpenAlex
W2972106090
Cited by
46
References
30
Citations by year
2026: 4 · 2025: 8 · 2024: 6 · 2023: 4 · 2022: 9 · 2021: 6 · 2020: 8 · 2019: 1
FWCI
4.41
Type
journal article
Language
en
Open access
closed
Locations
  • Energy (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
Funders
  • Narodowe Centrum Nauki (2016/21/N/ST8/03720)
  • National Center for Research and Development (PBS2/B4/8/2013)
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
Keywords
potassium chloride, biomass ash, high-temperature corrosion, low-alloy steel, 10CrMo9-10 steel, oxidation rate, oat straw, rye straw, protective oxide scale, potassium concentration, corrosion prediction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The influence of KCl on biomass ash melting behaviour and high-temperature corrosion of low-alloy steel. https://app.cochat.ai/papers/10.1016/j.energy.2019.116062
The paper
Mlonka-Mędrala, A., Gołombek, K., Buk, P., Cieślik, E., & Nowak, W. (2019). The influence of KCl on biomass ash melting behaviour and high-temperature corrosion of low-alloy steel. Energy. https://doi.org/10.1016/j.energy.2019.116062

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.