The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Structural design for non-linear metallic materials
Open accessAbstract
The material stress–strain behaviour of structural carbon steel may be suitably accurately reflected for design purposes by an idealised elastic, perfectly-plastic material model; such material behaviour lends itself to the concept of section classification. There are, however, a number of structural materials, such as aluminium, stainless steel and some high strength, cold-worked steels, where this idealised model becomes inaccurate due to non-linearity of the stress–strain response below the yield point and considerable strain hardening beyond the yield point. Resulting design methods, developed on the basis of the idealised material behaviour, are necessarily overly conservative. A new method has been developed that utilises a more accurate material model and a continuous measure of cross-section deformation capacity (rather than the discretised system of section classification) to provide more rational and efficient designs. This paper describes the basis for the proposed design method and presents a comparison with results obtained from laboratory testing and those predicted by the current Eurocode approach. The proposed design method offers average increases in member resistances of around 20% over the current Eurocode approach, and a reduction in scatter of the prediction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Timoshenko, S. P. (1936) · UCLA Biblioteca de Ingenieria Civil · Cited by 7,592
Knops, R. J., & Wilkes, E. W. (1973) · Mechanics of Solids · doi:10.1007/978-3-642-69569-8_2 · Cited by 5,165
Mirambell, E., & Real, E. (2000) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(99)00051-6 · Cited by 550
The use of stainless steel in structures
Gardner, L. (2005) · Progress in Structural Engineering and Materials · doi:10.1002/pse.190 · Cited by 496
Self-citationExperiments on stainless steel hollow sections—Part 1: Material and cross-sectional behaviour
Gardner, L., & Nethercot, D. A. (2004) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2003.11.006 · Cited by 472
Self-citationTests of high strength steel columns
Rasmussen, K. J. R., & Hancock, G. J. (1995) · Journal of Constructional Steel Research · doi:10.1016/0143-974x(95)97296-a · Cited by 262
Cited by
Description of stress–strain curves for stainless steel alloys
Arrayago, I., Real, E., & Gardner, L. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.001 · Cited by 563
Self-citationTesting and initial verification of the world's first metal 3D printed bridge
Gardner, L., Kyvelou, P., Herbert, G., & Buchanan, C. (2020) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2020.106233 · Cited by 340
Self-citationStructural design of stainless steel concrete filled columns
Lam, D., & Gardner, L. (2008) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2008.04.012 · Cited by 327
Self-citationElevated temperature material properties of stainless steel alloys
Gardner, L., Insausti, A., Ng, K. T., & Ashraf, M. (2010) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2009.12.016 · Cited by 295
Self-citationMechanical and microstructural testing of wire and arc additively manufactured sheet material
Kyvelou, P., Slack, H., Daskalaki Mountanou, D., Wadee, M. A., Britton, T. B., Buchanan, C., & Gardner, L. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108675 · Cited by 273
Self-citationHe, A., Liang, Y., & Zhao, O. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2019.109897 · Cited by 57
He, A., Liang, Y., & Zhao, O. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110893 · Cited by 42
Metadata
- Authors
- Gardner, L., & Ashraf, M.
- Venue
- Engineering Structures
- Publisher
- Elsevier BV
- Published
- 2006-05
- Volume
- 28
- Issue
- 6
- Pages
- 926-934
- ISSN
- 0141-0296 (ISSN-L)
- OpenAlex
- W2073185134
- Cited by
- 345
- References
- 6
- FWCI
- 26.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.