Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 212

The DOI matches its Crossref record.

Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading

Open access
Zhang, Chunwei, Gholipour, Gholamreza, Mousavi, Asma Alsadat · 2019 · Engineering Structures

Abstract

• The nonlinear dynamic responses and failure behaviors of simply supported RC beams subjected to a combination of impact and blast loadings are investigated. • The beam suffers more spallation in its depth when the impact load is applied before than blast loading. • The beam suffers more damages when the sequence blast loading initiates at the free vibration stage of response to impact load. • The beam experience greater internal forces when the blast load initiates simultaneous with the first peak impact force. Despite many studies existed in the literature on the investigation of reinforced concrete (RC) structures under impact or blast loads separately, this paper numerically evaluates the nonlinear dynamic responses and failure behaviors of simply-supported reinforced concrete (RC) beams subjected to the combination of impact and blast loads using LS-DYNA. The effects of the middle-rate impact loading stresses on the blast responses of RC beams are studied by considering different combined loading scenarios varied by the sequence of applying loads and the time lag between the initiations of these loads. From the simulation results, it was observed that when the impact load is applied on the beam prior to blast loading, it suffers a more severe spallation in the depth due to the flexural-shear stresses generated in the impacted beam before the initiation of the subsequent blast load. In addition, the beam suffers a more severe spallation in the depth and residual plastic deformations when the subsequent blast load initiates during the free vibration stage of the beam subjected to impact load. However, larger peak values for the internal forces are generated when the subsequent blast load initiates simultaneously with the occurrence of the first peak of impact force. In addition, the vulnerability of different RC beams varied by some important structural parameters including the beam depth, the span length and the configuration of the reinforcements are assessed under a combination of impact and blast loads through a proposed damage index based on the residual flexural capacity of RC beams.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.engstruct.2018.12.014

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Zhang, C., Gholipour, G., & Mousavi, A. A.
Venue
Engineering Structures
Publisher
Elsevier BV
Published
2019-02
Volume
181
Pages
124-142
ISSN
0141-0296 (ISSN-L)
OpenAlex
W2904308276
Cited by
212
References
0
FWCI
22.68
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.