The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Rapid seismic damage evaluation of bridge portfolios using machine learning techniques
Open accessAbstract
Abstract The damage state of a bridge has significant implications on the post-earthquake emergency traffic and recovery operations and is critical to identify the post-earthquake damage states without much delay. Currently, the damage states are identified either based on visual inspection or pre-determined fragility curves. Although these methodologies can provide useful information, the timely application of these methodologies for large scale regional damage assessments is often limited due to the manual or computational efforts. This paper proposes a methodology for the rapid damage state assessment (green, yellow, or red) of bridges utilizing the capabilities of machine learning techniques. Contrary to the existing methods, the proposed methodology accounts for bridge-specific attributes in the damage state assessment. The proposed methodology is demonstrated using two-span box-girder bridges in California. The prediction model is established using the training set, and the performance of the model is evaluated using the test set. It is noted that the machine learning algorithm called Random Forest provides better performance for the selected bridges, and its tagging accuracy ranges from 73% to 82% depending on the bridge configuration under consideration. The proposed methodology revealed that input parameters such as span length and reinforcement ratio in addition to the ground motion intensity parameter have a significant influence on the expected damage state.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936
Cited by
Mangalathu, S., Hwang, S.-H., & Jeon, J.-S. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110927 · Cited by 1,071
Self-citationMachine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Malekloo, A., Ozer, E., AlHamaydeh, M., & Girolami, M. (2022) · Structural Health Monitoring · doi:10.1177/14759217211036880 · Cited by 607
Applications of artificial intelligence for disaster management
Sun, W., Bocchini, P., & Davison, B. D. (2020) · Natural Hazards · doi:10.1007/s11069-020-04124-3 · Cited by 491
Feng, D.-C., Wang, W.-J., Mangalathu, S., Hu, G., & Wu, T. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.111979 · Cited by 305
Self-citation
Metadata
- Authors
- Mangalathu, S., Hwang, S.-H., Choi, E., & Jeon, J.-S.
- Venue
- Engineering Structures
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 201
- Pages
- 109785
- ISSN
- 0141-0296 (ISSN-L)
- OpenAlex
- W2981416566
- Cited by
- 216
- References
- 1
- FWCI
- 15.51
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.