The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Flower-shaped lithium nitride as a protective layer via facile plasma activation for stable lithium metal anodes
Open accessAbstract
Abstract Unstable solid electrolyte interphase (SEI) layer formation and uncontrolled lithium (Li) dendrites growth are two major obstacles that hinder the application of Li metal as the anode in Li batteries. To solve these problems, a multifunctional protective layer was designed for the first time using N2 plasma activation of the Li metal. A highly [001] oriented and flower shaped Li3N layer was obtained on the surface of Li metal with a plasma activation time less than 5 min. Due to high Young's modulus (48 GPa) and high ionic conductivity (5.02×10-1 mS cm-1), this unique protective layer can physically block the direct contact between reactive Li metal and the liquid organic electrolyte, and suppress the Li dendrites formation. It gives rise to a stable voltage profile with plating/stripping for 30,000 min in a symmetric cell. For Li/LCO full cell, the plasma activated Li3N electrode shows better capacity retention of more than 96% and higher capacity at a 5 C rate compared to bare Li anode. This plasma activation strategy provides a facile, scalable and efficient approach to realize a safe Li metal battery with superior electrochemical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Cited by
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries
Yan, C., Xu, R., Xiao, Y., Ding, J., Xu, L., Li, B., & Huang, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909887 · Cited by 510
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Pokharel, J., Baniya, A., He, W., Wu, F., Zhou, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13774-2 · Cited by 455
Self-citationStrategies to anode protection in lithium metal battery: A review
Li, J., Kong, Z., Liu, X., Zheng, B., Fan, Q. H., Garratt, E., Schuelke, T., Wang, K., Xu, H., & Jin, H. (2021) · InfoMat · doi:10.1002/inf2.12189 · Cited by 267
Na-k liquid alloy: A review on wettability enhancement and ionic carrier selection mechanism
Li, X., Liu, J., Chen, C., Yang, J., Xu, Z., Wu, M., Wang, Y., & Karim, Z. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2020.09.018 · Cited by 12
Metadata
- Authors
- Chen, K., Pathak, R., Gurung, A., Adhamash, E. A., Bahrami, B., He, Q., Qiao, H., Smirnova, A. L., Wu, J. J., Qiao, Q., & Zhou, Y.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 18
- Pages
- 389-396
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2913798017
- Cited by
- 213
- References
- 2
- FWCI
- 9.96
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Flower-shaped lithium nitride as a protective layer via facile plasma activation for stable lithium metal anodes. https://app.cochat.ai/papers/10.1016/j.ensm.2019.02.006
- The paper
- Chen, K., Pathak, R., Gurung, A., Adhamash, E. A., Bahrami, B., He, Q., Qiao, H., Smirnova, A. L., Wu, J. J., Qiao, Q., & Zhou, Y. (2019). Flower-shaped lithium nitride as a protective layer via facile plasma activation for stable lithium metal anodes. Energy Storage Materials. https://doi.org/10.1016/j.ensm.2019.02.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.