The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Rational design of multifunctional air electrodes for rechargeable Zn–Air batteries: Recent progress and future perspectives
Abstract
Abstract Rechargeable zinc–air batteries (ZABs) are considered as one of the most promising candidates as power sources for the portable electronic devices and electric vehicles (EVs), due to their high energy density, environmentally benignity and low production cost. One of the biggest challenges and the bottleneck in developing high-performance rechargeable ZABs are the design of suitable bifunctional air electrodes, with controlled chemical compositions and well-designed architectures that can efficiently catalyze the key oxygen reactions. Air electrodes are the most significant and complicated part of the rechargeable ZABs that inevitably determine the electrochemical performance and cycling stability. This paper particularly reviews the most recent developments, in designing and fabricating air electrodes with oxygen electrocatalysts. It covers the discussion on the relationships between surface structure and reaction mechanism. It highlights the developments of air electrodes in three main categories: 1) conventional powdery catalysts physically deposited on gas diffusion layer (GDL), 2) catalysts in situ grown on substrates, and 3) freestanding catalyst films or wires. The latter two are also known as self-supported air electrodes with desired properties of advanced nanostructures and binder-free assembly. In this review, various advanced air electrodes composed of non-noble catalysts are presented and discussed. Further, a general perspective for designing and fabricating high-performance air-electrodes is proposed to prolong the lifespan of electrically rechargeable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
Man, I. C., Su, H., Calle‐Vallejo, F., Hansen, H. A., Martínez, J. I., Inoglu, N. G., Kitchin, J., Jaramillo, T. F., Nørskov, J. K., & Rossmeisl, J. (2011) · ChemCatChem · doi:10.1002/cctc.201000397 · Cited by 4,769
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Toward the rational design of non-precious transition metal oxides for oxygen electrocatalysis
Hong, W. T., Risch, M., Stoerzinger, K. A., Grimaud, A., Suntivich, J., & Shao-Horn, Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03869j · Cited by 2,089
Fei, H., Dong, J., Feng, Y., Allen, C. S., Wan, C., Volosskiy, B., Li, M., Zhao, Z., Wang, Y., Sun, H., et al. (2018) · Nature Catalysis · doi:10.1038/s41929-017-0008-y · Cited by 1,973
High-Performance Electrocatalysis Using Metallic Cobalt Pyrite (CoS2) Micro- and Nanostructures
Faber, M. S., Dziedzic, R., Lukowski, M. A., Kaiser, N. S., Ding, Q., & Jin, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504099w · Cited by 1,372
Jiang, P., Liu, Q., Liang, Y., Tian, J., Asiri, A. M., & Sun, X. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406848 · Cited by 885
Jia, X., Zhao, Y., Chen, G., Shang, L., Shi, R., Kang, X., Waterhouse, G. I. N., Wu, L., Tung, C., & Zhang, T. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502585 · Cited by 773
Wang, X., Liu, J., Liu, Z., Wang, W., Luo, J., Han, X., Du, X., Qiao, S., & Yang, J. (2018) · Advanced Materials · doi:10.1002/adma.201800005 · Cited by 640
Wang, Q., Shang, L., Shi, R., Zhang, X., Zhao, Y., Waterhouse, G. I. N., Wu, L., Tung, C., & Zhang, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700467 · Cited by 508
Cited by
Recent advances of noble-metal-free bifunctional oxygen reduction and evolution electrocatalysts
Zhao, C.-X., Liu, J.-N., Wang, J., Ren, D., Li, B.-Q., & Zhang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00135c · Cited by 672
Lu, X. F., Fang, Y., Luan, D., & Lou, X. W. D. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04898 · Cited by 555
Surface/interface nanoengineering for rechargeable Zn–air batteries
Zhou, T., Zhang, N., Wu, C., & Xie, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03634b · Cited by 501
High-entropy single-atom activated carbon catalysts for sustainable oxygen electrocatalysis
Lei, X., Tang, Q., Zheng, Y., Kidkhunthod, P., Zhou, X., Ji, B., & Tang, Y. (2023) · Nature Sustainability · doi:10.1038/s41893-023-01101-z · Cited by 419
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Metadata
- Authors
- Wu, M., Zhang, G., Wu, M., Prakash, J., & Sun, S.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 21
- Pages
- 253-286
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2945516499
- Cited by
- 226
- References
- 13
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rational design of multifunctional air electrodes for rechargeable Zn–Air batteries: Recent progress and future perspectives. https://app.cochat.ai/papers/10.1016/j.ensm.2019.05.018
- The paper
- Wu, M., Zhang, G., Wu, M., Prakash, J., & Sun, S. (2019). Rational design of multifunctional air electrodes for rechargeable Zn–Air batteries: Recent progress and future perspectives. Energy Storage Materials. https://doi.org/10.1016/j.ensm.2019.05.018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.