Energy density issues of flexible energy storage devices
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The rapid development of wearable electronics promotes a high demand for flexible power sources. Flexible rechargeable batteries, as the stars of flexible energy storage and conversion systems, possess simultaneously high flexibility, high energy density, and dynamically stable output. However, energy density is often sacrificed largely for achieving high flexibility. In light of the exciting progress that has been achieved in flexible energy storage devices, an in-depth energy density assessment is urgently needed. This review begins with a brief introduction of the measurement method for energy density. Then state-of-the-art progress in the development of high energy flexible lithium-ion batteries, sodium-ion batteries and zinc-ion batteries are summarized and compared in detail. The strategies towards high energy density while keeping high flexibility are elucidated, including choosing active materials with high specific capacity or high voltage, minimizing the fraction of inactive components, structural engineering on both electrodes and batteries, developing solid-state electrolyte, etc. Critical challenges and important directions for future research are envisioned to close. This review aims to provide potential guidance for improving the energy density of flexible energy storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Kumar, R., Shin, J., Yin, L., You, J., Meng, Y. S., & Wang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602096 · Cited by 261
Zhang, Y., Zhao, Y., Cheng, X., Weng, W., Ren, J., Fang, X., Jiang, Y., Chen, P., Zhang, Z., Wang, Y., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506142 · Cited by 117
Self-citation
Cited by
Mathew, V., Sambandam, B., Kim, S., Kim, S., Park, S., Lee, S., Alfaruqi, M. H., Soundharrajan, V., Islam, S., Putro, D. Y., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00740 · Cited by 479
Advanced energy materials for flexible batteries in energy storage: A review
Kong, L., Tang, C., Peng, H., Huang, J., & Zhang, Q. (2020) · SmartMat · doi:10.1002/smm2.1007 · Cited by 316
An ultrathin rechargeable solid-state zinc ion fiber battery for electronic textiles
Xiao, X., Xiao, X., Zhou, Y., Zhao, X., Chen, G., Liu, Z., Wang, Z., Lu, C., Hu, M., Nashalian, A., et al. (2021) · Science Advances · doi:10.1126/sciadv.abl3742 · Cited by 297
Self-citationFlexible Energy Storage Devices to Power the Future
He, J., Cao, L., Cui, J., Fu, G., Jiang, R., Xu, X., & Guan, C. (2024) · Advanced Materials · doi:10.1002/adma.202306090 · Cited by 286
Designing wearable microgrids: towards autonomous sustainable on-body energy management
Yin, L., Kim, K. N., Trifonov, A., Podhajny, T., & Wang, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03113a · Cited by 111
Metadata
- Authors
- Wang, D., Han, C., Mo, F., Yang, Q., Zhao, Y., Li, Q., Liang, G., Dong, B., & Zhi, C.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 28
- Pages
- 264-292
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W3010867822
- Cited by
- 183
- References
- 3
- FWCI
- 8.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.