The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Sustainability criteria for assessing nanotechnology applicability in industrial wastewater treatment: Current status and future outlook
Open accessAbstract
Application of engineered nanomaterials for the treatment of industrial effluents and to deal with recalcitrant pollutants has been noticeably promoted in recent years. Laboratory, pilot and full-scale studies emphasize the potential of this technology to offer promising treatment options to meet the future needs for clean water resources and to comply with stringent environmental regulations. The technology is now in the stage of being transferred to the real applications. Therefore, the assessment of its performance according to sustainability criteria and their incorporation into the decision-making process is a key task to ensure that long term benefits are achieved from the nano-treatment technologies. In this study, the importance of sustainability criteria for the conventional and novel technologies for the treatment of industrial effluents was determined in a general approach assisted by a fuzzy-Delphi method. The criteria were categorized in technical, economic, environmental and social branches and the current situation of the nanotechnology regarding the criteria was critically discussed. The results indicate that the efficiency and safety are the most important parameters to make sustainable choices for the treatment of industrial effluents. Also, in addition to the need for scaling-up the nanotechnology in various stages, the study on their environmental footprint must continue in deeper scales under expected environmental conditions, in particular the synthesis of engineered nanomaterials and the development of reactors with the ability of recovery and reuse the nanomaterials. This paper will aid to select the most sustainable types of nanomaterials for the real applications and to guide the future studies in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Remediation of wastewater using various nano-materials
Anjum, M., Miandad, R., Waqas, M., Gehany, F., & Barakat, M. A. (2019) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2016.10.004 · Cited by 779
Nanomaterials-based advanced oxidation processes for wastewater treatment: A review
Bethi, B., Sonawane, S. H., Bhanvase, B. A., & Gumfekar, S. P. (2016) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2016.08.016 · Cited by 517
Bhatnagar, A., Chinnasamy, S., Singh, M., & Das, K. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.064 · Cited by 451
Cited by
Silva, J. A. (2023) · Sustainability · doi:10.3390/su151410940 · Cited by 484
Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment
Jain, K., Patel, A. S., Pardhi, V. P., & Flora, S. J. S. (2021) · Molecules · doi:10.3390/molecules26061797 · Cited by 422
Sustainability considerations in membrane-based technologies for industrial effluents treatment
Kamali, M., Suhas, D. P., Costa, M. E., Capela, I., & Aminabhavi, T. M. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.075 · Cited by 340
Self-citationBiochar for soil applications-sustainability aspects, challenges and future prospects
Kamali, M., Sweygers, N., Al-Salem, S., Appels, L., Aminabhavi, T. M., & Dewil, R. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131189 · Cited by 304
Self-citationBiochar in Water and Wastewater Treatment—A Sustainability Assessment
Kamali, M., Appels, L., Kwon, E. E., Aminabhavi, T. M., & Dewil, R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129946 · Cited by 226
Self-citation
Metadata
- Authors
- Kamali, M., Persson, K. M., Costa, M. E., & Capela, I.
- Venue
- Environment International
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 125
- Pages
- 261-276
- ISSN
- 0160-4120 (ISSN-L)
- OpenAlex
- W2911731121
- Cited by
- 213
- References
- 3
- FWCI
- 8.13
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.