CoChat
Sign Up
Cited by 1,092

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Environmental concentrations of engineered nanomaterials: Review of modeling and analytical studies

Gottschalk, Fadri, Sun, TianYin, Nowack, Bernd·2013·Environmental Pollution
DOI 10.1016/j.envpol.2013.06.003
Open this paper in CoChat — free account

Abstract

Scientific consensus predicts that the worldwide use of engineered nanomaterials (ENM) leads to their release into the environment. We reviewed the available literature concerning environmental concentrations of six ENMs (TiO2, ZnO, Ag, fullerenes, CNT and CeO2) in surface waters, wastewater treatment plant effluents, biosolids, sediments, soils and air. Presently, a dozen modeling studies provide environmental concentrations for ENM and a handful of analytical works can be used as basis for a preliminary validation. There are still major knowledge gaps (e.g. on ENM production, application and release) that affect the modeled values, but over all an agreement on the order of magnitude of the environmental concentrations can be reached. True validation of the modeled values is difficult because trace analytical methods that are specific for ENM detection and quantification are not available. The modeled and measured results are not always comparable due to the different forms and sizes of particles that these two approaches target.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.envpol.2013.06.003

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 2 references

Research works printed but not linked: 90

  1. Akaighe, 2011, Humic acid-induced silver nanoparticle formation under environmentally relevant conditions, Environmental Science & Technology, 45, 3895, 10.1021/es103946g · DOI
  2. Alvarez, 2009, Research priorities to advance eco-responsible nanotechnology, ACS Nano, 3, 1616, 10.1021/nn9006835 · DOI
  3. Arvidsson, 2012, Particle flow analysis. Exploring potential use phase emissions of titanium dioxide. Nanoparticles from sunscreen, paint, and cement, Journal of Industrial Ecology, 16, 343, 10.1111/j.1530-9290.2011.00429.x · DOI
  4. Arvidsson, 2011, Impacts of a silver-coated future: particle flow analysis of silver nanoparticles, Journal of Industrial Ecology, 15, 844, 10.1111/j.1530-9290.2011.00400.x · DOI
  5. Arvidsson, 2011, Challenges in exposure modeling of nanoparticles in aquatic environments, Human and Ecological Risk Assessment, 17, 245, 10.1080/10807039.2011.538639 · DOI
  6. Aschberger, 2011, Analysis of currently available data for characterising the risk of engineered nanomaterials to the environment and human health – lessons learned from four case studies, Environment International, 37, 1143, 10.1016/j.envint.2011.02.005 · DOI
  7. Auffan, 2010, Structural degradation at the surface of a TiO2-based nanomaterial used in cosmetics, Environmental Science & Technology, 44, 2689, 10.1021/es903757q · DOI
  8. Baun, 2008, Ecotoxicity of engineered nanoparticles to aquatic invertebrates: a brief review and recommendations for future toxicity testing, Ecotoxicology, 17, 387, 10.1007/s10646-008-0208-y · DOI
  9. Benn, 2010, The release of nanosilver from consumer products used in the home, Journal of Environmental Quality, 39, 1875, 10.2134/jeq2009.0363 · DOI
  10. Benn, 2008, Nanoparticle silver released into water from commercially available sock fabrics, Environmental Science & Technology, 42, 4133, 10.1021/es7032718 · DOI
  11. Berrojalbiz, 2011, Persistent organic pollutants in Mediterranean seawater and processes affecting their accumulation in plankton, Environmental Science & Technology, 45, 4315, 10.1021/es103742w · DOI
  12. Blaser, 2008, Estimation of cumulative aquatic exposure and risk due to silver: contribution of nano-functionalized plastics and textiles, Science of the Total Environment, 390, 396, 10.1016/j.scitotenv.2007.10.010 · DOI
  13. Castro-Jimenez, 2010, Atmospheric occurrence and deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the open Mediterranean sea, Environmental Science & Technology, 44, 5456, 10.1021/es100718n · DOI
  14. Clark, 2012, Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices, Journal of Nanoparticle Research, 14, 970, 10.1007/s11051-012-0970-x · DOI
  15. Dogru, 2002, Gasification of sewage sludge using a throated downdraft gasifier and uncertainty analysis, Fuel Processing Technology, 75, 55, 10.1016/S0378-3820(01)00234-X · DOI
  16. Farkas, 2011, Characterization of the effluent from a nanosilver producing washing machine, Environment International, 37, 1057, 10.1016/j.envint.2011.03.006 · DOI
  17. Farré, 2010, First determination of C60 and C70 fullerenes and N-methylfulleropyrrolidine C60 on the suspended material of wastewater effluents by liquid chromatography hybrid quadrupole linear ion trap tandem mass spectrometry, Journal of Hydrology, 383, 44, 10.1016/j.jhydrol.2009.08.016 · DOI
  18. Geranio, 2009, The behavior of silver nanotextiles during washing, Environmental Science & Technology, 43, 8113, 10.1021/es9018332 · DOI
  19. Gohler, 2010, Characterization of nanoparticle release from surface coatings by the simulation of a sanding process, Annals of Occupational Hygiene, 54, 615, 10.1093/annhyg/meq053 · DOI
  20. Gottschalk, 2011, The release of engineered nanomaterials to the environment, Journal of Environmental Monitoring, 13, 1145, 10.1039/c0em00547a · DOI
  21. Gottschalk, 2011, Engineered nanomaterials in rivers – exposure scenarios for Switzerland at high spatial and temporal resolution, Environmental Pollution, 159, 3439, 10.1016/j.envpol.2011.08.023 · DOI
  22. Gottschalk, 2010, Probabilistic material flow modeling for assessing the environmental exposure to compounds: methodology and an application to engineered nano-TiO2 particles, Environmental Modelling & Software, 25, 320, 10.1016/j.envsoft.2009.08.011 · DOI
  23. Gottschalk, 2009, Modeled environmental concentrations of engineered nanomaterials (TiO2, ZnO, Ag, CNT, fullerenes) for different regions, Environmental Science and Technology, 43, 9216, 10.1021/es9015553 · DOI
  24. Gottschalk, 2010, Possibilities and limitations of modeling environmental exposure to engineered nanomaterials by probabilistic material flow analysis, Environmental Toxicology and Chemistry, 29, 1036, 10.1002/etc.135 · DOI
  25. Guiot, 2009, Measurement of nanoparticle removal by abrasion, Journal of Physics: Conference Series, 170, 1
  26. Handy, 2012, Ecotoxicity test methods for engineered nanomaterials: practical experiences and recommendations from the bench, Environmental Toxicology and Chemistry, 31, 15, 10.1002/etc.706 · DOI
  27. Handy, 2008, The ecotoxicology of nanoparticles and nanomaterials: current status, knowledge gaps, challenges, and future needs, Ecotoxicology, 17, 315, 10.1007/s10646-008-0206-0 · DOI
  28. Handy, 2008, The ecotoxicology and chemistry of manufactured nanoparticles, Ecotoxicology, 17, 287, 10.1007/s10646-008-0199-8 · DOI
  29. Hendren, 2011, Estimating production data for five engineered nanomaterials as a basis for exposure assessment, Environmental Science & Technology, 45, 2562, 10.1021/es103300g · DOI
  30. Hendren, 2013, Modeling nanomaterial fate in wastewater treatment: Monte Carlo simulation of silver nanoparticles (nano-Ag), Science of the Total Environment, 449, 418, 10.1016/j.scitotenv.2013.01.078 · DOI
  31. Hendren, 2013, Modeling approaches for characterizing and evaluating environmental exposure to engineered nanomaterials in support of risk-based decision making, Environmental Science & Technology, 47, 1190, 10.1021/es302749u · DOI
  32. Heymann, 2003, Terrestrial and extraterrestrial fullerenes, Fullerenes Nanotubes and Carbon Nanostructures, 11, 333, 10.1081/FST-120025855 · DOI
  33. Hoque, 2012, Detection and characterization of silver nanoparticles in aqueous matrices using asymmetric-flow field flow fractionation with inductively coupled plasma mass spectrometry, Journal of Chromatography A, 1233, 109, 10.1016/j.chroma.2012.02.011 · DOI
  34. Howard, 1991, Fullerenes C60 and C70 in flames, Nature, 352, 139, 10.1038/352139a0 · DOI
  35. Hsu, 2007, Evaluation of nanoparticle emission for TiO2 nanopowder coating materials, Journal of Nanoparticle Research, 9, 157, 10.1007/s11051-006-9185-3 · DOI
  36. Hu, 2012, Energy and environmental nanotechnology in conductive paper and textiles, Energy & Environmental Science, 5, 6423, 10.1039/c2ee02414d · DOI
  37. Isaacson, 2009, Quantitative analysis of fullerene nanomaterials in environmental systems: a critical review, Environmental Science & Technology, 43, 6463, 10.1021/es900692e · DOI
  38. Johnson, 2011, An assessment of the fate, behaviour and environmental risk associated with sunscreen TiO(2) nanoparticles in UK field scenarios, Science of the Total Environment, 409, 2503, 10.1016/j.scitotenv.2011.03.040 · DOI
  39. Judy, 2012, Bioavailability of gold nanomaterials to plants: importance of particle size and surface coating, Environmental Science & Technology, 46, 8467, 10.1021/es3019397 · DOI
  40. Kaegi, 2010, Release of silver nanoparticles from outdoor facades, Environmental Pollution, 158, 2900, 10.1016/j.envpol.2010.06.009 · DOI
  41. Kaegi, 2008, Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment, Environmental Pollution, 156, 233, 10.1016/j.envpol.2008.08.004 · DOI
  42. Kaegi, 2011, Behavior of metallic silver nanoparticles in a pilot wastewater treatment plant, Environmental Science & Technology, 45, 3902, 10.1021/es1041892 · DOI
  43. Kahru, 2010, From ecotoxicology to nanoecotoxicology, Toxicology, 269, 105, 10.1016/j.tox.2009.08.016 · DOI
  44. Khosravi, 2012, A novel approach for determining total titanium from titanium dioxide nanoparticles suspended in water and biosolids by digestion with ammonium persulfate, Analytica Chimica Acta, 713, 86, 10.1016/j.aca.2011.11.048 · DOI
  45. Kim, 2010, Discovery and characterization of silver sulfide nanoparticles in final sewage sludge products, Environmental Science & Technology, 44, 7509, 10.1021/es101565j · DOI
  46. Kiser, 2009, Titanium nanomaterial removal and release from wastewater treatment plants, Environmental Science and Technology, 43, 6757, 10.1021/es901102n · DOI
  47. Klaine, 2008, Nanomaterials in the environment: behavior, fate, bioavailability, and effects, Environmental Toxicology & Chemistry, 27, 1825, 10.1897/08-090.1 · DOI
  48. Klaine, 2012, Paradigms to assess the environmental impact of manufactured nanomaterials, Environmental Toxicology and Chemistry, 31, 3, 10.1002/etc.733 · DOI
  49. Koelmans, 2009, Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments, Environmental Pollution, 157, 1110, 10.1016/j.envpol.2008.09.006 · DOI
  50. Kulthong, 2010, Determination of silver nanoparticle release from antibacterial fabrics into artificial sweat, Particle and Fibre Toxicology, 7, 1, 10.1186/1743-8977-7-8 · DOI
  51. Labille, 2010, Aging of TiO2 nanocomposites used in sunscreen. Dispersion and fate of the degradation products in aqueous environment, Environmental Pollution, 158, 3482, 10.1016/j.envpol.2010.02.012 · DOI
  52. Levard, 2012, Environmental transformations of silver nanoparticles: impact on stability and toxicity, Environmental Science & Technology, 46, 6900, 10.1021/es2037405 · DOI
  53. Lorenz, 2012, Characterization of silver release from commercially available functional (nano)textiles, Chemosphere, 89, 817, 10.1016/j.chemosphere.2012.04.063 · DOI
  54. Luo, 2011, Spatial distribution, electron microscopy analysis of titanium and its correlation to heavy metals: occurrence and sources of titanium nanomaterials in surface sediments from Xiamen Bay, China, Journal of Environmental Monitoring, 13, 1046, 10.1039/c0em00199f · DOI
  55. Majedi, 2012, Chemometric analytical approach for the cloud point extraction and inductively coupled plasma mass spectrometric determination of zinc oxide nanoparticles in water samples, Analytical Chemistry, 84, 6546, 10.1021/ac300833t · DOI
  56. Mangematin, 2012, The future of nanotechnologies, Technovation, 32, 157, 10.1016/j.technovation.2012.01.003 · DOI
  57. Maurer, 2012, Reduction and reoxidation of humic acid: influence on speciation of cadmium and silver, Environmental Science & Technology, 46, 8808, 10.1021/es301520s · DOI
  58. Mihranyan, 2012, Current status and future prospects of nanotechnology in cosmetics, Progress in Materials Science, 57, 875, 10.1016/j.pmatsci.2011.10.001 · DOI
  59. Mitrano, 2012, Detecting nanoparticulate silver using single-particle inductively coupled plasma-mass spectrometry, Environmental Toxicology and Chemistry, 31, 115, 10.1002/etc.719 · DOI
  60. Money, 2012, The use of Bayesian networks for nanoparticle risk forecasting: model formulation and baseline evaluation, Science of the Total Environment, 426, 436, 10.1016/j.scitotenv.2012.03.064 · DOI
  61. Mueller, 2013, Modeling the flows of engineered nanomaterials during waste handling, Environmental Science: Processes & Impacts, 251
  62. Mueller, 2008, Exposure modeling of engineered nanoparticles in the environment, Environmental Science & Technology, 42, 4447, 10.1021/es7029637 · DOI
  63. Musee, 2010, Simulated environmental risk estimation of engineered nanomaterials: a case of cosmetics in Johannesburg City, Human & Experimental Toxicology, 30, 1181, 10.1177/0960327110391387 · DOI
  64. Neal, 2011, Titanium in UK rural, agricultural and urban/industrial rivers: geogenic and anthropogenic colloidal/sub-colloidal sources and the significance of within-river retention, Science of the Total Environment, 409, 1843, 10.1016/j.scitotenv.2010.12.021 · DOI
  65. Nowack, 2010, Nanosilver revisited downstream, Science, 330, 1054, 10.1126/science.1198074 · DOI
  66. Nowack, 2007, Occurrence, behavior and effects of nanoparticles in the environment, Environmental Pollution, 150, 5, 10.1016/j.envpol.2007.06.006 · DOI
  67. Nowack, 2012, Potential scenarios for nanomaterial release and subsequent alteration in the environment, Environmental Toxicology and Chemistry, 31, 50, 10.1002/etc.726 · DOI
  68. O'Brien, 2010, Nano-scale pollutants: fate in Irish surface and drinking water regulatory systems, Human and Ecological Risk Assessment, 16, 847, 10.1080/10807039.2010.501270 · DOI
  69. O'Brien, 2010, A risk assessment framework for assessing metallic nanomaterials of environmental concern: aquatic exposure and behavior, Risk Analysis, 31, 706, 10.1111/j.1539-6924.2010.01540.x · DOI
  70. Omelia, 1980, Aquasols – the behavior of small particles in aquatic systems, Environmental Science & Technology, 14, 1052, 10.1021/es60169a601 · DOI
  71. Ort, 2009, Model-based evaluation of reduction strategies for micropollutants from wastewater treatment plants in complex river networks, Environmental Science & Technology, 43, 3214, 10.1021/es802286v · DOI
  72. Ottofuelling, 2011, Commercial titanium dioxide nanoparticles in both natural and synthetic water: comprehensive multidimensional testing and prediction of aggregation behavior, Environmental Science & Technology, 45, 10045, 10.1021/es2023225 · DOI
  73. Ozawa, 1999, Production of fullerenes by combustion, Fullerene Science and Technology, 7, 387, 10.1080/10641229909350289 · DOI
  74. Park, 2008, Hazard and risk assessment of a nanoparticulate cerium oxide-based diesel fuel additive – a case study, Inhalation Toxicology, 20, 547, 10.1080/08958370801915309 · DOI
  75. Peralta-Videa, 2011, Nanomaterials and the environment: a review for the biennium 2008–2010, Journal of Hazardous Materials, 186, 1, 10.1016/j.jhazmat.2010.11.020 · DOI
  76. Piccinno, 2012, Industrial production quantities and uses of ten engineered nanomaterials for Europe and the world, Journal of Nanoparticle Research, 14, 1109, 10.1007/s11051-012-1109-9 · DOI · Paper page
  77. Praetorius, 2012, Development of environmental fate models for engineered nanoparticles – a case study of TiO2 nanoparticles in the Rhine River, Environmental Science & Technology, 46, 6705, 10.1021/es204530n · DOI
  78. Quik, 2011, How to assess exposure of aquatic organisms to manufactured nanoparticles?, Environment International, 37, 1068, 10.1016/j.envint.2011.01.015 · DOI
  79. Richter, 1997, Generation of higher fullerenes in flames, The Journal of Physical Chemistry B, 101, 1556, 10.1021/jp962928c · DOI
  80. Sanchis, 2011, Occurrence of aerosol-bound fullerenes in the Mediterranean sea atmosphere, Environmental Science & Technology, 46, 1335, 10.1021/es200758m · DOI
  81. Scheckel, 2010, Synchrotron speciation of silver and zinc oxide nanoparticles aged in a kaolin suspension, Environmental Science & Technology, 44, 1307, 10.1021/es9032265 · DOI
  82. Smoluchowski, 1917, Versuch einer matematischen Theorie der Koagulationskinetic kolloider Lösungen, Z Phys Chem, 92, 129
  83. Ulrich, 2003, Analysis of additive metals in fuel and emission aerosols of diesel vehicles with and without particle traps, Analytical and Bioanalytical Chemistry, 377, 71, 10.1007/s00216-003-2054-3 · DOI
  84. Vorbau, 2009, Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings, Journal of Aerosol Science, 40, 209, 10.1016/j.jaerosci.2008.10.006 · DOI
  85. Weir, 2012, Titanium dioxide nanoparticles in food and personal care products, Environmental Science & Technology, 46, 2242, 10.1021/es204168d · DOI
  86. Westerhoff, 2011, Occurrence and removal of titanium at full scale wastewater treatment plants: implications for TiO(2) nanomaterials, Journal of Environmental Monitoring, 13, 1195, 10.1039/c1em10017c · DOI
  87. Wiesner, 2009, Decreasing uncertainties in assessing environmental exposure, risk, and ecological implications of nanomaterials, Environmental Science & Technology, 43, 6458, 10.1021/es803621k · DOI
  88. Williams, 2009, A national risk assessment for intersex in fish arising from steroids estrogens, Environmental Toxicology and Chemistry, 28, 220, 10.1897/08-047.1 · DOI
  89. Windler, 2012, Release of titanium dioxide from textiles during washing, Environmental Science & Technology, 46, 8181, 10.1021/es301633b · DOI
  90. Yin, 2012, Sunlight-induced reduction of ionic Ag and Au to metallic nanoparticles by dissolved organic matter, Acs Nano, 6, 7910, 10.1021/nn302293r · DOI

Cited by

Sorted by citations

Metadata

Authors
Gottschalk, F., Sun, T., & Nowack, B.
Venue
Environmental Pollution
Publisher
Elsevier BV
Published
2013-10
Volume
181
Pages
287-300
ISSN
0269-7491
DOI
10.1016/j.envpol.2013.06.003
Cited by
1,092
References
2
Language
en
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Funders
  • EU-FP7 (266712)
  • Swiss National Science Foundation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review