Conversion of heavy metal-containing biowaste from phytoremediation site to value-added solid fuel through hydrothermal carbonization
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this study, heavy metal-containing sunflower residues obtained from a phytoremediation site were hydrothermally carbonized at 160-260 °C. The properties of hydrochar thus produced were evaluated with respect to its potential as solid fuel. The results confirmed that hydrothermal carbonization (HTC) reduced the concentration of heavy metals in hydrochars, with the concentration lower than the maximum permissible level of domestic standards for bio-solid refuse fuel. Higher HTC temperatures resulted in improved energy-related properties of the hydrochar (i.e., coalification degree, fuel ratio, and higher heating value); however, HTC temperatures between 200 and 220 °C were deemed suitable for energy retention efficiency. Furthermore, as hydrochar contains low nitrogen and ash content, it can be considered as a clean energy source. The results of this study suggest a sustainable approach to the disposal and effective utilization of contaminant-containing biowastes. Moreover, this study suggests linking biomass cultivation for phytoremediation and converting the phytoremediated biomass into value-added solid fuel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Kim, D., Lee, K., & Park, K. Y. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.07.037 · Cited by 261
Self-citationHydrothermal carbonization of natural microalgae containing a high ash content
Liu, H., Chen, Y., Yang, H., Gentili, F. G., Söderlind, U., Wang, X., Zhang, W., & Chen, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.004 · Cited by 151
Vocciante, M., Caretta, A., Bua, L., Bagatin, R., Franchi, E., Petruzzelli, G., & Ferro, S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.02.104 · Cited by 114
Cited by
Khosravi, A., Zheng, H., Liu, Q., Hashemi, M., Tang, Y., & Xing, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133142 · Cited by 286
A review on disposal and utilization of phytoremediation plants containing heavy metals
Liu, Z., & Tran, K.-Q. (2021) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2021.112821 · Cited by 183
A state-of-the-art of phytoremediation approach for sustainable management of heavy metals recovery
Tan, H. W., Pang, Y. L., Lim, S., & Chong, W. C. (2023) · Environmental Technology & Innovation · doi:10.1016/j.eti.2023.103043 · Cited by 164
Edgar, V.-N., Fabián, F.-L., Mario, P.-C. J., & Ileana, V.-R. (2021) · Applied Sciences · doi:10.3390/app11072982 · Cited by 91
“Therefore, phytoremediation suggests a sustainable approach to the disposal and effective use of HM-containing biowastes [159].”
Background
Metadata
- Authors
- Lee, J., & Park, K. Y.
- Venue
- Environmental Pollution
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 269
- Pages
- 116127
- ISSN
- 0269-7491 (ISSN-L)
- OpenAlex
- W3107715616
- Cited by
- 51
- References
- 4
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Conversion of heavy metal-containing biowaste from phytoremediation site to value-added solid fuel through hydrothermal carbonization. https://app.cochat.ai/papers/10.1016/j.envpol.2020.116127
- The paper
- Lee, J., & Park, K. Y. (2021). Conversion of heavy metal-containing biowaste from phytoremediation site to value-added solid fuel through hydrothermal carbonization. Environmental Pollution. https://doi.org/10.1016/j.envpol.2020.116127
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.