Automated calculation of surface energy fluxes with high-frequency lake buoy data
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Lake Heat Flux Analyzer is a program used for calculating the surface energy fluxes in lakes according to established literature methodologies. The program was developed in MATLAB for the rapid analysis of high-frequency data from instrumented lake buoys in support of the emerging field of aquatic sensor network science. To calculate the surface energy fluxes, the program requires a number of input variables, such as air and water temperature, relative humidity, wind speed , and short-wave radiation. Available outputs for Lake Heat Flux Analyzer include the surface fluxes of momentum, sensible heat and latent heat and their corresponding transfer coefficients, incoming and outgoing long-wave radiation. Lake Heat Flux Analyzer is open source and can be used to process data from multiple lakes rapidly. It provides a means of calculating the surface fluxes using a consistent method, thereby facilitating global comparisons of high-frequency data from lake buoys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wind sheltering of a lake by a tree canopy or bluff topography
Markfort, C. D., Perez, A. L. S., Thill, J. W., Jaster, D. A., Porté‐Agel, F., & Stefan, H. G. (2010) · Water Resources Research · doi:10.1029/2009wr007759 · Cited by 123
Cited by
Diel Surface Temperature Range Scales with Lake Size
Woolway, R. I., Jones, I. D., Maberly, S. C., French, J. R., Livingstone, D. M., Monteith, D. T., Simpson, G. L., Thackeray, S. J., Andersen, M. R., Battarbee, R. W., et al. (2016) · PLOS ONE · doi:10.1371/journal.pone.0152466 · Cited by 132
Self-citationAndersen, M. R., Sand-Jensen, K., Iestyn Woolway, R., & Jones, I. D. (2017) · Aquatic Sciences · doi:10.1007/s00027-016-0505-0 · Cited by 76
Self-citationMartinsen, K. T., Andersen, M. R., & Sand-Jensen, K. (2019) · Hydrobiologia · doi:10.1007/s10750-018-3737-2 · Cited by 45
Gas transfer velocities in small forested ponds
Holgerson, M. A., Farr, E. R., & Raymond, P. A. (2017) · Journal of Geophysical Research: Biogeosciences · doi:10.1002/2016jg003734 · Cited by 36
“While wind will increase both latent and sensible heat fluxes in small ponds, temperature influences the sensible heat flux [Woolway et al., 2015].”
BackgroundQUANTITATIVE RISK ASSESSMENT OF MEGA REAL ESTATE PROJECTS: A MONTE CARLO SIMULATION APPROACH
Chief Executive Officer (CEO), G. H. L. (. G., & Jahid, M. S. R. (2022) · Journal of Sustainable Development and Policy · doi:10.63125/nh269421 · Cited by 3
Metadata
- Authors
- Woolway, R. I., Jones, I. D., Hamilton, D. P., Maberly, S. C., Muraoka, K., Read, J. S., Smyth, R. L., & Winslow, L. A.
- Venue
- Environmental Modelling & Software
- Publisher
- Elsevier BV
- Published
- 2015-08
- Volume
- 70
- Pages
- 191-198
- ISSN
- 1364-8152 (ISSN-L)
- OpenAlex
- W1612806847
- Cited by
- 85
- References
- 1
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.