The DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Influence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review
Abstract
Abstract Thermal energy storage using phase change materials (PCM) proved to be a promising technology because of its relative advantages over the other types of energy storage methods. Along with thermophysical properties of PCM, the performance of latent heat based thermal energy storage system depends on the design of the heat exchanger. Although extensive research is being carried out over the past few years, an integrated study on the design of PCM heat exchanger is scarce. This review presents the in-depth analysis of various operating conditions and design parameters that need to be considered in the design of a PCM based heat exchanger. Shell and tube type, triple concentric tube type heat exchangers are discussed along with the various heat transfer techniques employed in both the types of heat exchangers. In each enhancement technique, the influencing geometric parameters are summarized, and the recommended values of those parameters are provided. The present article is expected to be a helpful reference for the researchers working in the field of thermal energy storage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Investigation on Convective Heat Transfer and Flow Features of Nanofluids
Xuan, Y., & Li, Q. (2003) · Journal of Heat Transfer · doi:10.1115/1.1532008 · Cited by 4,644
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Review on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Latent Heat Storage Materials and Systems: A Review
Sharma, S. D., & Sagara, K. (2005) · International Journal of Green Energy · doi:10.1081/ge-200051299 · Cited by 714
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Maximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
Agyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.01.011 · Cited by 562
Sarı, A. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.10.022 · Cited by 526
Zhang, P., Meng, Z. N., Zhu, H., Wang, Y. L., & Peng, S. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 497
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Esen, M., Durmuş, A., & Durmuş, A. (1998) · Solar Energy · doi:10.1016/s0038-092x(97)00104-7 · Cited by 480
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Ismail, K. A. R., Alves, C. L. F., & Modesto, M. S. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00002-8 · Cited by 459
Yang, X., Lu, Z., Bai, Q., Zhang, Q., Jin, L., & Yan, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.007 · Cited by 458
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.009 · Cited by 425
Cui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 423
Experimental and numerical study of annular PCM storage in the presence of natural convection
Longeon, M., Soupart, A., Fourmigué, J.-F., Bruch, A., & Marty, P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.06.007 · Cited by 412
Mesalhy, O., Lafdi, K., Elgafy, A., & Bowman, K. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.010 · Cited by 407
Liu, Z., Yao, Y., & Wu, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.022 · Cited by 405
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Wei, G., Wang, G., Xu, C., Ju, X., Xing, L., Du, X., & Yang, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.271 · Cited by 395
Xu, Y., Ren, Q., Zheng, Z.-J., & He, Y.-L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.019 · Cited by 393
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.030 · Cited by 387
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.01.022 · Cited by 373
Garg, H. P., Mullick, S. C., & Bhargava, A. K. (1985) · Springer eBooks · doi:10.1007/978-94-009-5301-7 · Cited by 364
Seddegh, S., Wang, X., & Henderson, A. D. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.107 · Cited by 361
Veerakumar, C., & Sreekumar, A. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.12.005 · Cited by 350
Pizzolato, A., Sharma, A., Maute, K., Sciacovelli, A., & Verda, V. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.050 · Cited by 344
Rabienataj Darzi, A. A., Jourabian, M., & Farhadi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.016 · Cited by 329
Mahdi, J. M., & Nsofor, E. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.036 · Cited by 322
Experimental study on melting/solidification characteristics of a paraffin as PCM
Akgün, M., Aydın, O., & Kaygusuz, K. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.014 · Cited by 305
Application of TCE-PCM based heat sinks for cooling of electronic components: A review
Sahoo, S. K., Das, M. K., & Rath, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.238 · Cited by 297
Lafdi, K., Mesalhy, O., & Shaikh, S. (2007) · Journal of Applied Physics · doi:10.1063/1.2802183 · Cited by 291
Numerical study of melting inside concentric and eccentric horizontal annulus
Darzi, A. R., Farhadi, M., & Sedighi, K. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2011.11.033 · Cited by 288
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.020 · Cited by 287
Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review
Kasaeian, A., bahrami, L., Pourfayaz, F., Khodabandeh, E., & Yan, W.-M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.037 · Cited by 287
The solutions to electric vehicle air conditioning systems: A review
Zhang, Z., Wang, J., Feng, X., Chang, L., Chen, Y., & Wang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.005 · Cited by 283
Thermal conductivity enhancement of Ag nanowires on an organic phase change material
Zeng, J. L., Cao, Z., Yang, D. W., Sun, L. X., & Zhang, L. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0472-y · Cited by 281
Zhao, C. Y., & Wu, Z. G. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.032 · Cited by 279
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Numerical simulation of a shell-and-tube latent heat thermal energy storage unit
Lacroix, M. (1993) · Solar Energy · doi:10.1016/0038-092x(93)90029-n · Cited by 274
Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube
Lacroix, M. (1993) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(05)80139-5 · Cited by 270
Fang, X., Fan, L.-W., Ding, Q., Wang, X., Yao, X.-L., Hou, J.-F., Yu, Z.-T., Cheng, G.-H., Hu, Y.-C., & Cen, K.-F. (2013) · Energy & Fuels · doi:10.1021/ef400702a · Cited by 261
Adine, H. A., & El Qarnia, H. (2009) · Applied Mathematical Modelling · doi:10.1016/j.apm.2008.05.016 · Cited by 260
Carbon nanoadditives to enhance latent energy storage of phase change materials
Shaikh, S., Lafdi, K., & Hallinan, K. (2008) · Journal of Applied Physics · doi:10.1063/1.2903538 · Cited by 256
Phase change in multi-tube heat exchangers
Esapour, M., Hosseini, M. J., Ranjbar, A. A., Pahamli, Y., & Bahrampoury, R. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.07.063 · Cited by 250
Harish, S., Orejon, D., Takata, Y., & Kohno, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.056 · Cited by 249
Farid, M. M., & Kanzawa, A. (1989) · Journal of Solar Energy Engineering · doi:10.1115/1.3268301 · Cited by 242
Heat transfer enhancement of paraffin wax using graphite foam for thermal energy storage
Zhong, Y., Guo, Q., Li, S., Shi, J., & Liu, L. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.02.004 · Cited by 234
Yuan, Y., Cao, X., Xiang, B., & Du, Y. (2016) · Solar Energy · doi:10.1016/j.solener.2016.07.014 · Cited by 225
Mahdi, J. M., & Nsofor, E. C. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.016 · Cited by 224
Comparison between the single-PCM and multi-PCM thermal energy storage design
Aldoss, T. K., & Rahman, M. M. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.03.047 · Cited by 217
Li, T., Lee, J.-H., Wang, R., & Kang, Y. T. (2013) · Energy · doi:10.1016/j.energy.2013.04.010 · Cited by 210
Effects of different multiple PCMs on the performance of a latent thermal energy storage system
Fang, M., & Chen, G. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.08.001 · Cited by 210
Zhang, Y., & Faghri, A. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00402-5 · Cited by 209
Thermal performance of a multiple PCM thermal storage unit for free cooling
Mosaffa, A. H., Infante Ferreira, C. A., Talati, F., & Rosen, M. A. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.10.018 · Cited by 206
Yu, Z.-T., Fang, X., Fan, L.-W., Wang, X., Xiao, Y.-Q., Zeng, Y., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Carbon · doi:10.1016/j.carbon.2012.10.059 · Cited by 203
Tao, Y. B., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.008 · Cited by 199
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Siahpush, A., O’Brien, J., & Crepeau, J. (2008) · Journal of Heat Transfer · doi:10.1115/1.2928010 · Cited by 196
Zhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Trp, A., Lenic, K., & Frankovic, B. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.02.004 · Cited by 193
Kousha, N., Hosseini, M. J., Aligoodarz, M. R., Pakrouh, R., & Bahrampoury, R. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.203 · Cited by 190
Choi, D. H., Lee, J., Hong, H., & Kang, Y. T. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.004 · Cited by 187
Yang, J., Yang, L., Xu, C., & Du, X. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.088 · Cited by 187
Thermal energy storage performance of paraffin in a novel tube-in-shell system
Akgün, M., Aydın, O., & Kaygusuz, K. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.05.013 · Cited by 184
Ho, C. J., & Gao, J. Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.065 · Cited by 183
Zhao, W., France, D. M., Yu, W., Kim, T., & Singh, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.03.031 · Cited by 182
Literature review on the use of phase change materials in glazing and shading solutions
Silva, T., Vicente, R., & Rodrigues, F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.201 · Cited by 180
Solidification of a PCM with nanoparticles in triplex-tube thermal energy storage system
Mahdi, J. M., & Nsofor, E. C. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.130 · Cited by 180
Yang, L., Zhang, X., & Xu, G. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.09.045 · Cited by 179
Sari, A., & Kaygusuz, K. (2002) · Solar Energy · doi:10.1016/s0038-092x(02)00026-9 · Cited by 179
Effect of porosity of conducting matrix on a phase change energy storage device
Atal, A., Wang, Y., Harsha, M., & Sengupta, S. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.09.033 · Cited by 176
Experimental and numerical investigation of thermal energy storage with a finned tube
Erek, A., ?lken, Z., & Acar, M. A. (2005) · International Journal of Energy Research · doi:10.1002/er.1057 · Cited by 174
Zhong, Y., Li, S., Wei, X., Liu, Z., Guo, Q., Shi, J., & Liu, L. (2010) · Carbon · doi:10.1016/j.carbon.2009.09.033 · Cited by 170
Kumaresan, V., Velraj, R., & Das, S. K. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0980-3 · Cited by 170
Zhong, L., Zhang, X., Luan, Y., Wang, G., Feng, Y., & Feng, D. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.019 · Cited by 168
Thermal conductivity improvement of phase change materials/graphite foam composites
Moeini Sedeh, M., & Khodadadi, J. M. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.004 · Cited by 167
Seddegh, S., Wang, X., Joybari, M. M., & Haghighat, F. (2017) · Energy · doi:10.1016/j.energy.2017.07.014 · Cited by 166
Kurnia, J. C., Sasmito, A. P., Jangam, S. V., & Mujumdar, A. S. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.08.015 · Cited by 162
Agarwal, A., & Sarviya, R. M. (2015) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2015.09.014 · Cited by 160
Investigations on latent heat storage materials for solar water and space heating applications
Salunkhe, P. B., & Devanuri, J. K. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.05.008 · Cited by 153
Self-citationHeat-transfer characteristics of a latent heat storage system using MgCl2 · 6H2O
Choi, J. C., & Kim, S. D. (1992) · Energy · doi:10.1016/0360-5442(92)90004-j · Cited by 150
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
Seeniraj, R. V., & Narasimhan, N. L. (2007) · Solar Energy · doi:10.1016/j.solener.2007.11.001 · Cited by 150
Avcı, M., & Yazıcı, M. Y. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.04.030 · Cited by 146
(1997) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(97)84240-3 · Cited by 145
Wang, Y., Wang, L., Xie, N., Lin, X., & Chen, H. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.125 · Cited by 143
Watanabe, T., Kikuchi, H., & Kanzawa, A. (1993) · Heat Recovery Systems and CHP · doi:10.1016/0890-4332(93)90025-q · Cited by 142
Duan, Z.-J., Zhang, H.-Z., Sun, L., Cao, Z. Y., Xu, F., Zou, Y., Chu, H., Qiu, S., Xiang, C., & Zhou, H. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3311-0 · Cited by 141
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Yazıcı, M. Y., Avcı, M., Aydın, O., et al. (2014) · Solar Energy · doi:10.1016/j.solener.2014.01.007 · Cited by 140
Xiao, X., Zhang, P., & Li, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.074 · Cited by 137
Effects of MWNTs on phase change enthalpy and thermal conductivity of a solid-liquid organic PCM
Zeng, J., Cao, Z. Y., Yang, D. W., Xu, F., Sun, L. X., Zhang, X., & Zhang, L. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-008-9275-9 · Cited by 135
Nkhonjera, L., Bello‐Ochende, T., John, G. R., & King’ondu, C. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.059 · Cited by 134
Applications of solar water heating system with phase change material
Wang, Z., Qiu, F., Yang, W., & Zhao, X. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.184 · Cited by 129
Effects of copper nanowires on the properties of an organic phase change material
Zeng, J., Zhu, F., Yu, S., Zhu, L., Cao, Z. Y., Sun, L., Deng, G.-R., Yan, W.-P., & Zhang, L. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.06.013 · Cited by 126
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.01.031 · Cited by 126
Experimental investigations of porous materials in high temperature thermal energy storage systems
Wu, Z. G., & Zhao, C.-Y. (2011) · Solar Energy · doi:10.1016/j.solener.2011.03.021 · Cited by 126
Gong, Z., & Mujumdar, A. S. (1997) · Applied Thermal Engineering · doi:10.1016/s1359-4311(97)00012-4 · Cited by 124
Eslamnezhad, H., & Rahimi, A. B. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.067 · Cited by 124
Wang, J., Ouyang, Y., & Chen, G. (2001) · International Journal of Energy Research · doi:10.1002/er.695 · Cited by 120
Parsazadeh, M., & Duan, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.133 · Cited by 116
Jian-you, L. (2008) · Solar Energy · doi:10.1016/j.solener.2008.05.006 · Cited by 115
Tao, Y. B., & He, Y. L. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.039 · Cited by 114
Li, Z., Sun, W., Wang, G., & Wu, Z. G. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.06.023 · Cited by 114
Gong, Z., & MUJUMDAR, A. S. (1997) · Applied Thermal Engineering · doi:10.1016/s1359-4311(96)00054-3 · Cited by 111
Tao, Y. B., Liu, Y. K., & He, Y. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.098 · Cited by 111
Motahar, S., Nikkam, N., Alemrajabi, A. A., Khodabandeh, R., Toprak, M. S., & Muhammed, M. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.10.016 · Cited by 109
Wang, W., Zhang, K., Wang, L.-B., & He, Y. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.04.063 · Cited by 109
Li, Y., He, Y., Wang, Z., Xu, C., & Wang, W. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.08.026 · Cited by 108
Thermal performance of a pcm storage unit
Ismail, K. A. R., & Gonçalves, M. M. (1999) · Energy Conversion and Management · doi:10.1016/s0196-8904(98)00042-9 · Cited by 107
Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications
Mosaffa, A. H., Farshi, L. G., Ferreira, C. A. I., & Rosen, M. A. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.02.025 · Cited by 105
Experimental Investigations on Latent Heat Storage Unit using Paraffin Wax as Phase Change Material
Rathod, M. K., & Banerjee, J. (2013) · Experimental Heat Transfer · doi:10.1080/08916152.2012.719065 · Cited by 104
Wang, W., Wang, L.-B., & He, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.08.108 · Cited by 103
Enhancement of energy charge-discharge rates in composite slabs of different phase change materials
Gong, Z., & MUJUMDAR, A. S. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00179-4 · Cited by 102
Kibria, M. A., Anisur, M. R., Mahfuz, M. H., Saidur, R., & Metselaar, H. S. C. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.02.023 · Cited by 102
Han, G.-S., Ding, H., Huang, Y., Tong, L., & Ding, Y. (2017) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2017.09.009 · Cited by 101
Xiao, X., & Zhang, P. (2014) · Energy · doi:10.1016/j.energy.2014.11.020 · Cited by 97
Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins
Srivatsa, P. V. S. S., Baby, R., & Balaji, C. (2014) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2014.894371 · Cited by 96
Li, Y. Q., He, Y. L., Song, H.-J., Xu, C., & Wang, W. W. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.03.022 · Cited by 96
Li, Z., & Wu, Z. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.017 · Cited by 96
Transient performance of a PCM-based heat sink with high aspect-ratio carbon nanofillers
Fan, L., Zhu, Z.-Q., Zeng, Y. D., Xiao, Y., Liu, X., Wu, Y., Ding, Q. W., Yu, Z., & Cen, K. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.050 · Cited by 94
Performance assessment of heat storage by phase change materials containing MWCNTs and graphite
Teng, T.-P., Cheng, C.-M., & Cheng, C.-P. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.07.002 · Cited by 93
Pahamli, Y., Hosseini, M. J., Ranjbar, A. A., & Bahrampoury, R. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.09.044 · Cited by 93
Numerical and experimental study on heat pump water heater with PCM for thermal storage
Long, J., & Zhu, D. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2007.05.001 · Cited by 91
Cyclic heat transfer in a novel storage unit of multiple phase change materials
Gong, Z., & Mujumdar, A. S. (1996) · Applied Thermal Engineering · doi:10.1016/1359-4311(95)00088-7 · Cited by 86
Thermal analysis of a finned-tube LHTS module for a solar dynamic power system
Seeniraj, R. V., Velraj, R., & Narasimhan, N. L. (2002) · Heat and Mass Transfer · doi:10.1007/s002310100268 · Cited by 85
Thermal performance analysis for a heat receiver using multiple phase change materials
Cui, H., Yuan, X., & Hou, X. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(03)00210-2 · Cited by 84
Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs
Hu, Z., Li, A., Gao, R., & Yin, H. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4370-6 · Cited by 81
Thermal properties of heat storage composites containing multiwalled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2008) · Journal of Applied Physics · doi:10.1063/1.3041495 · Cited by 78
Experimental study on charging and discharging periods of water in a latent heat storage unit
Ezan, M. A., Özdoğan, M., & Erek, A. (2011) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2011.06.010 · Cited by 72
Xiao, X., & Zhang, P. (2015) · Energy · doi:10.1016/j.energy.2014.11.061 · Cited by 72
Ezra, M., Kozak, Y., Dubovsky, V., & Ziskind, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.040 · Cited by 72
Thermodynamic Optimization of Phase-Change Energy Storage Using Two or More Materials
Lim, J. S., Bejan, A., & Kim, J. H. (1992) · Journal of Energy Resources Technology · doi:10.1115/1.2905925 · Cited by 68
Thermal analysis of PCM containing heat exchanger enhanced with normal annular fines
Hosseini, M. J., Rahimi, M., & Bahrampoury, R. (2015) · Mechanical sciences · doi:10.5194/ms-6-221-2015 · Cited by 67
Das, N., Takata, Y., Masamichi Kohno, B., & Harish, S. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.166 · Cited by 66
Numerical evaluation of a triple concentric-tube latent heat thermal energy storage
Başal, B., & Ünal, A. (2013) · Solar Energy · doi:10.1016/j.solener.2013.02.032 · Cited by 65
Das, N., Takata, Y., Masamichi Kohno, B., & Harish, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.101 · Cited by 60
Heat exchanger performance for latent heat thermal energy storage system
Fath, H. E. S. (1991) · Energy Conversion and Management · doi:10.1016/0196-8904(91)90067-s · Cited by 54
Das, N., Masamichi Kohno, B., Takata, Y., Patil, D. V., & Harish, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.084 · Cited by 52
Study on phase change temperature distributions of composite PCMs in thermal energy storage systems
Wang, J., Chen, G., & Zheng, F. (1999) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(19990325)23:4<277::aid-er475>3.0.co;2-q · Cited by 47
Numerical study on performance enhancement of shell-and-tube latent heat storage unit
Tao, Y. B., & He, Y. L. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.07.013 · Cited by 40
Convection-based model for a PCM vertical storage unit
Ismail, K. A. R., & de Melo, C. A. (1998) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(199811)22:14<1249::aid-er451>3.0.co;2-m · Cited by 35
Numerical Simulation of Phase Change Thermal Storage in Finned Double-Pipe Heat Exchanger
Shokouhmand, H., & Kamkari, B. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.232.742 · Cited by 33
Melting of PCM with Nanoparticles in a Triplex-Tube Thermal Energy Storage System
Mahdi, J. M., & Emmanuel, C. N. (2016) · ASHRAE Transactions (American Society of Heating, Refrigerating and Air-Conditioning Engineers) · Cited by 31
Latent heat thermal storage for solar dynamic power generation
Bellecci, C., & Conti, M. (1993) · Solar Energy · doi:10.1016/0038-092x(93)90093-4 · Cited by 27
Thermal Performance of a Phase Change Material‐Based Latent Heat Thermal Storage Unit
Rathod, M. K., & Banerjee, J. (2013) · Heat Transfer-Asian Research · doi:10.1002/htj.21120 · Cited by 27
An improved PCM heat storage technology utilizing metal foam
Dukhan, N., & Bodke, S. (2010) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2010.5501364 · Cited by 25
Paria, S., Baradaran, S., Amiri, A., Sarhan, A. A. D., & Kazi, S. N. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5006-1 · Cited by 25
On the Suitability of Phase Change Material (PCM) for Thermal Management of Electronic Components
Markandeyulu, T., Devanuri, J. K., & Kumar, K. K. (2016) · Indian Journal of Science and Technology · doi:10.17485/ijst/2016/v9is1/107939 · Cited by 24
Self-citationDevanuri, J. K., & Kochar, S. (2017) · Transactions of the Indian Ceramic Society · doi:10.1080/0371750x.2016.1268072 · Cited by 23
Self-citationLi, W., & Kong, C.-C. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/360283 · Cited by 16
Transient Analysis of an Improved Finned Tube Heat Exchanger for Thermal Energy Storage System
Walter, H., Beck, A., & Hameter, M. (2015) · ASME International Conference on Energy Sustainability (ES) · doi:10.1115/es2015-49144 · Cited by 16
Cited by
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Li, Q., Li, C., Du, Z., Jiang, F., & Ding, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113806 · Cited by 221
Akhmetov, B., Navarro, M. E., Seitov, A., Kaltayev, A., Bakenov, Z., & Ding, Y. (2019) · Solar Energy · doi:10.1016/j.solener.2019.10.015 · Cited by 65
Metadata
- Authors
- Kalapala, L., & Devanuri, J. K.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 20
- Pages
- 497-519
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W2898624949
- Cited by
- 269
- References
- 163
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.