The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Preparation of beeswax/multi-walled carbon nanotubes as novel shape-stable nanocomposite phase-change material for thermal energy storage
Abstract
Abstract Development of phase-change material (PCM) as thermal energy storage for building envelopes is promising for energy utilization. However, there are two major drawbacks of PCM application, which are low thermal conductivity and high-volume reduction due to phase-change transition. One solution is to develop a shape-stabilized phase-change material (SSPCM) as a composite that is able to prevent leakage during the transition from solid to liquid. Therefore, the objective of this study is to prepare beeswax/multi-walled carbon nanotubes as form-stable nanocomposite phase-change material for thermal energy storage, based on previously unattempted methods. Beeswax was being used as PCM because of its high latent heat and multi-walled carbon nanotubes (MWCNTs) as supporting material with high thermal conductivity. There are three types of MWCNTs applied in this research: pristine MWCNTs, ball-milled MWCNTs and acid-treated MWCNTs. Beeswax/CNT composite samples were prepared with ratios of 5 and 20 wt%. Composite samples were tested from structure modification and thermal performance, including latent heat, sensible heat, melting point, solidifying point, thermal conductivity, and thermal-cycle testing for up to 300 cycles. Experimental results showed that thermal conductivity of novel shape-stable nanocomposite PCM increased by a factor of 2 and there was no significant phase transition in the melting or solidifying temperature. The high heat storage capability and thermal conductivity of nanocomposite PCM enable it to be a potential material for thermal energy storage in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on buildings energy consumption information
Pérez-Lombard, L., Ortiz, J., & Pout, C. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.03.007 · Cited by 6,649
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Zhao, D., Qian, X., Gu, X., Jajja, S. A., & Yang, R. (2016) · Journal of Electronic Packaging · doi:10.1115/1.4034605 · Cited by 559
Amin, M., Putra, N., Kosasih, E. A., Prawiro, E., Luanto, R. A., & Mahlia, T. M. I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.085 · Cited by 370
Self-citation
Cited by
Thermal conductivity enhancement on phase change materials for thermal energy storage: A review
Wu, S., Yan, T., Kuai, Z., & Pan, W. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.010 · Cited by 962
Nižetić, S., Djilali, N., Papadopoulos, A., & Rodrigues, J. J. P. C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.397 · Cited by 538
Wu, M. Q., Wu, S., Cai, Y. F., Wang, R. Z., & Li, T. X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 409
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.101913 · Cited by 354
Metadata
- Authors
- Putra, N., Rawi, S., Amin, M., Kusrini, E., Kosasih, E. A., & Indra Mahlia, T. M.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 21
- Pages
- 32-39
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W2901617295
- Cited by
- 162
- References
- 4
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.