Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 177

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

A Review of Phase Change Materials for the Thermal Management and Isothermalisation of Lithium-Ion Cells

Landini, S., Leworthy, J., O’Donovan, T.S. · 2019 · Journal of Energy Storage

Abstract

Abstract Li-Ion batteries will play an important role in reaching emission targets by sustaining the further integration of renewable energy technologies and Electric Vehicles (EVs) in society. Their performance however is quite sensitive to temperature, leading to capacity fade, acceleration of ageing effect and possible thermal runaway. A Thermal Management System (TMS) should maintain a battery at an operating temperature within an optimal range and maximise temperature uniformity, i.e. approaching an isothermal condition. Many studies have experimentally investigated the electrical performance of Li-Ion batteries under controlled environmental temperatures. Notably however, these controlled conditions do not impose a uniform temperature or a controlled rate of cooling, as a TMS would. From a review of the relevant literature a ratio of the heat generation to the power production is proposed, i.e. quantifying an equivalent electro-chemical efficiency to advance research in this technological area and as additional TMS design metric. Overall, there is enough evidence that 25–30 °C is the best temperature range to minimise the ageing effect while 25–40 °C is typically reported as the general Li-Ion cells operating range. No specific temperature is identified to optimise the cycle electro-chemical efficiency and minimise the ageing effect. Therefore, a TMS should keep Li-Ion batteries within a specific temperature range according to the need for either higher electro-chemical efficiencies (i.e. higher powers and lower heat generation rates) or higher operating life. There are four main thermal management approaches of Li-Ion batteries: air-cooling, liquid-cooling, boiling and Phase Change Materials (PCM). Air cooling is preferred for safety reasons but is less efficient as the rate of heat transfer achievable is relatively low. Forced air cooling can effectively keep the temperature at a preferred level but fails to guarantee a uniform temperature. Liquid cooling is better in terms of heat transfer performance, but it is less safe and can still result in significant thermal gradients within the pack. Boiling effectively keeps Li-Ion cells temperature constant and uniform but can be quite complex to operate and control. Phase Change Materials (PCMs) as a passive cooling approach are proposed as an effective and low-cost isothermalisation technique. However, when Li-Ion batteries are operated under extreme conditions (high ambient temperature, high discharge rates), PCM are not able to recover all latent energy potential during solidification and this leads to possible thermal runaway. Overall, it is clear that no TMS alone is holistically better than others and the choice between air cooling, liquid cooling, boiling and latent heat PCM systems is entirely linked to the specific combination of temperatures, heat rates, cells capacity and geometry. Active PCM systems however, mainly a combination of liquid cooling and passive PCM, show promising results towards an ideal isothermal condition. Also, they introduce the potential to store the thermal energy and use it as needed, converting a Li-Ion cell from an Electrical Energy Storage System (EESS) to a Combined Heat and Power (CHP) system.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.est.2019.100887

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

See all 177

Metadata

Authors
Landini, S., Leworthy, J., & O’Donovan, T. S.
Venue
Journal of Energy Storage
Publisher
Elsevier BV
Published
2019-10
Volume
25
Pages
100887
ISSN
2352-152X (ISSN-L)
OpenAlex
W2969213688
Cited by
177
References
1
FWCI
8.47
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Review of Phase Change Materials for the Thermal Management and Isothermalisation of Lithium-Ion Cells. https://app.cochat.ai/papers/10.1016/j.est.2019.100887
The paper
Landini, S., Leworthy, J., & O’Donovan, T. S. (2019). A Review of Phase Change Materials for the Thermal Management and Isothermalisation of Lithium-Ion Cells. Journal of Energy Storage. https://doi.org/10.1016/j.est.2019.100887

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.