A review of the use of phase change materials on performance of solar stills
The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Abstract To convert the brackish water into potable water economically solar still can be used. It was reported that the main cause of its inferior performance is the heat loss from the solar still. To increase the yield of a solar still, the dissipated heat is stored in phase change material and reused during evening and night time for distillation. This paper reviews the state of the art of solar stills built-in with phase change material to investigate the best phase change material for solar still. During the review of reported works, it is observed that the paraffin wax amongst lauric acid, bitumen, stearic acid, palmitic acid, capric acid, beeswax and myristic acid is the most excellent phase change material for passive as well as active solar still. The paraffin wax increases the productivity, energy and exergy efficiency of a single basin passive solar still by 180%, 67.20%, and 40% respectively. The productivity augmentation for active solar still with paraffin wax is found as 307.54%. Paraffin wax has low thermal conductivity, hence, the hollow cylindrical pin fins on the absorber plate within the paraffin wax is emerged as the best technique to increase its thermal conductivity. This arrangement increases the productivity and energy efficiency of a single basin passive solar still by 11.96% and 37.50% respectively. Thermal conductivity can also be increased by mixing nanoparticles with PCM. The copper oxide nanoparticles are found as the most appropriate nanoparticles to mix with paraffin wax since this blend increases productivity by 125%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
A Comprehensive Review of Thermal Energy Storage
Sarbu, I., & Sebarchievici, C. (2018) · Sustainability · doi:10.3390/su10010191 · Cited by 1,311
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Solar powered desalination – Technology, energy and future outlook
Ahmed, F. E., Hashaikeh, R., & Hilal, N. (2019) · Desalination · doi:10.1016/j.desal.2018.12.002 · Cited by 574
Review of researches and developments on solar stills
Kabeel, A. E., & El‐Agouz, S. A. (2011) · Desalination · doi:10.1016/j.desal.2011.03.042 · Cited by 469
Thermal performance of a single basin solar still with PCM as a storage medium
El-Sebaii, A. A., Al-Ghamdi, A. A., Al-Hazmi, F. S., & Faidah, A. S. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.014 · Cited by 446
Selection of materials with potential in sensible thermal energy storage
Fernández, A. I., Martínez, M., Segarra, M., Martorell, I., & Cabeza, L. F. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.05.035 · Cited by 343
Cited by
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Katekar, V. P., & Deshmukh, S. S.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 30
- Pages
- 101398
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3025452006
- Cited by
- 177
- References
- 51
- FWCI
- 4.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.