The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
A Comprehensive Review of Thermal Energy Storage
Open accessAbstract
Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation. TES systems are used particularly in buildings and in industrial processes. This paper is focused on TES technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings. The principles of several energy storage methods and calculation of storage capacities are described. Sensible heat storage technologies, including water tank, underground, and packed-bed storage methods, are briefly reviewed. Additionally, latent-heat storage systems associated with phase-change materials for use in solar heating/cooling of buildings, solar water heating, heat-pump systems, and concentrating solar power plants as well as thermo-chemical storage are discussed. Finally, cool thermal energy storage is also briefly reviewed and outstanding information on the performance and costs of TES systems are included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23]. Figure 2. Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23].](/paper-figures/7fcc1854a1b3442d9de07ae44fa5f198/a-comprehensive-review-of-thermal-energy-storage-figure-2.png)
![Figure 3 A typical system using water tank storage [4]. Figure 3. Atypical system using water tank storage [4].](/paper-figures/b284cf36aa4840e3a7fe9dd2a7ad41dc/a-comprehensive-review-of-thermal-energy-storage-figure-3.png)
![Figure 4 Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28]. Figure 4. Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28].](/paper-figures/43d77b00c9be4a6daa000fbeea9e3a72/a-comprehensive-review-of-thermal-energy-storage-figure-4.png)
![Figure 5 Pebble-bed storage system [4]. Figure 5. Pebble-bed storage system [4].](/paper-figures/e7af5982bacc41c1ab6b892433600604/a-comprehensive-review-of-thermal-energy-storage-figure-5.png)
![Figure 6 Classification of phase-change materials (PCMs) [11]. Figure 6. Classification of phase-change materials (PCMs) [11].](/paper-figures/733e70074c8c4630813d3ca195cac9fa/a-comprehensive-review-of-thermal-energy-storage-figure-6.png)
![Figure 7 Categories of PCM based on melting point [46]. Figure 7. Categories of PCM based on melting point [46].](/paper-figures/9a638cb7aaef439399ebf6409ffde4d3/a-comprehensive-review-of-thermal-energy-storage-figure-7.png)

![Figure 9 The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 °C for 24 h [55]. Figure 9. The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 ◦ C for 24 h [55].](/paper-figures/801d904517d241ed821743c0c03eedb3/a-comprehensive-review-of-thermal-energy-storage-figure-9.png)
![Figure 10 Schematics of a storage Trombe wall [58]. Figure 10. Schematics of a storage Trombe wall [58].](/paper-figures/96c4456356d94c3c9e3acee456832c66/a-comprehensive-review-of-thermal-energy-storage-figure-10.png)
![Figure 11 Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60].](/paper-figures/2d915258eb1d40dd97e5a2fa06bd84be/a-comprehensive-review-of-thermal-energy-storage-figure-11.png)
![Figure 12 Clay bricks including PCM macro-capsules [61]. Figure 12. Clay bricks including PCM macro-capsules [61].](/paper-figures/cd73eec042104d2fa157106a1f61050c/a-comprehensive-review-of-thermal-energy-storage-figure-12.png)
![Figure 13 Operational mode of the ventilated façade with PCM [64]. Figure 13. Operational mode of the ventilated façade with PCM [64].](/paper-figures/9ac7e1aa3fcb4f62a1bc9c39b6cceca6/a-comprehensive-review-of-thermal-energy-storage-figure-13.png)
![Figure 14 Thermal properties of various PCMs [78]. Figure 14. Thermal properties of various PCMs [78].](/paper-figures/d3ae6f97540d4762a653cb7764f57ba7/a-comprehensive-review-of-thermal-energy-storage-figure-14.png)
![Figure 15 Schematic of a parabolic trough power plant with two-tank molten salt storage [80]. Figure 15. Schematic of a parabolic trough power plant with two-tank molten salt storage [80].](/paper-figures/0520abab24674d9d99215dc7a9f90d6e/a-comprehensive-review-of-thermal-energy-storage-figure-15.png)
![Figure 16 Seasonal adsorption thermal storage system [90]. Figure 16. Seasonal adsorption thermal storage system [90].](/paper-figures/a2790d973b6e452ea6dda569333f70d7/a-comprehensive-review-of-thermal-energy-storage-figure-16.png)
![Figure 17 Storage capacity depending on temperature for TES [9]. Figure 17. Storage capacity depending on temperature for TES [9].](/paper-figures/c57f0d437af24ed9b55b7875ed9f3424/a-comprehensive-review-of-thermal-energy-storage-figure-17.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They also have the disadvantage of low thermal conductivity, as well as toxicity, corrosivity, instability, and flammability, while also being much more expensive than paraffin [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Paraffin specifically has the advantages of being non-toxic, chemically stable, compatible with metal containers, and inexpensive.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The main disadvantages of metallic PCMs include a high cost, low specific heat, and low latent heat of fusion per weight unit [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Fatty acids have a well-defined phase transition and easily reproduced phase change.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Salt hydrates also have a relatively small volume change, high density, and are inexpensive and readily available.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measured
13 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
A review of solar collectors and thermal energy storage in solar thermal applications
Tian, Y., & Zhao, C. Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.051 · Cited by 1,772
Review on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144
Review of solid–liquid phase change materials and their encapsulation technologies
Su, W., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.044 · Cited by 1,037
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809
Research works printed but not linked: 5
- Sarbu, I., and Sebarchievici, C. (2016). Solar Heating and Cooling: Fundamentals, Experiments and Applications, Elsevier.
- Dincer, I., and Rosen, M.A. (2011). Thermal Energy Storage: Systems and Application, John Wiley & Sons.
- Hauer, A. (2011, January 15). Storage Technology Issues and Opportunities, International Low-Carbon Energy Technology Platform. Proceedings of the Strategic and Cross-Cutting Workshop “Energy Storage—Issues and Opportunities”, Paris, France.
- Paksoy, H., Snijders, A., and Stiles, L. (2009, January 5–17). State-of-the-art review of aquifer thermal energy storage systems for heating and cooling buildings. Proceedings of the Effstock Conference, Stockholm, Sweden.
- Garg, H.P., Mullick, S.C., and Bhargava, A.K. (2013). Solar Thermal Energy Storage, Springer.
Cited by
A review of energy storage types, applications and recent developments
Koohi-Fayegh, S., & Rosen, M. A. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101047 · Cited by 2,009
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Kebede, A. A., Kalogiannis, T., Van Mierlo, J., & Berecibar, M. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112213 · Cited by 1,213
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
Metadata
- Authors
- Sarbu, I., & Sebarchievici, C.
- Affiliations
- Department of Building Services Engineering, Polytechnic University of Timisoara, Piata Victoriei, No. 2A, 300006 Timisoara, Romania
- ORCID
- Sarbu, Ioan
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2018-01-14
- Volume
- 10
- Issue
- 1
- Pages
- 191
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2786385826
- Cited by
- 1,311
- References
- 90
- Citations by year
- 2026: 159 · 2025: 215 · 2024: 177 · 2023: 176 · 2022: 197 · 2021: 174 · 2020: 122 · 2019: 67 · 2018: 23
- FWCI
- 61.67
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- thermal energy storage, solar heat, building energy demand, sensible heat storage, latent heat storage, phase change materials, underground thermal energy storage, packed bed storage, solar water heating, heat pumps, concentrated solar power, storage capacity calculation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Comprehensive Review of Thermal Energy Storage. https://app.cochat.ai/papers/10.3390/su10010191
- The paper
- Sarbu, I., & Sebarchievici, C. (2018). A Comprehensive Review of Thermal Energy Storage. Sustainability. https://doi.org/10.3390/su10010191
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.