The DOI matches its Crossref record; 145 of the 145 references it cites were found in a registry or an index.
A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications
Abstract
Abstract Researchers world-wide are investigating thermal energy storage, especially phase change materials, for their substantial benefits in improving energy efficiency, sustaining thermal comfort in buildings and contributing to the reduction of environmental pollution. Residential buildings and commercial constructions, being dependent on heating and cooling systems, are subjected to the utilization of PCM technology through several applications. The current study presents a state-of-the-art review that covers recent literature on thermal energy storage systems utilizing PCMs for buildings. The reviewed applications are heating and hybrid applications, that are categorized as passive and active systems. A summary of the PCMs used, applications, thermo-physical properties and incorporation methods are presented as well. The study emphasizes the promising effectiveness of PCM in building heating applications, and highlights the significance of PCM system hybridization. The study shows that experimental investigations on commercial constructions, and hybrid systems development and optimization, are still required. Finally, possible combinations of active and passive heating applications with their auspicious benefits in terms of energy efficiency augmentation, are recommended.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
A review of energy storage types, applications and recent developments
Koohi-Fayegh, S., & Rosen, M. A. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101047 · Cited by 2,009
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
An overview of thermal energy storage systems
Alva, G., Lin, Y., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2017.12.037 · Cited by 1,408
Differential Scanning Calorimetry
Höhne, G. W. H., Hemminger, W., & Flammersheim, H.-J. (1996) · Springer eBooks · doi:10.1007/978-3-662-03302-9 · Cited by 1,316
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,090
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Economic growth, CO2 emissions and energy consumption: What causes what and where?
Acheampong, A. O. (2018) · Energy Economics · doi:10.1016/j.eneco.2018.07.022 · Cited by 852
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Du, K., Calautit, J., Wang, Z., Wu, Y., & Liu, H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.005 · Cited by 688
Organic phase change materials and their textile applications: An overview
Sarier, N., & Onder, E. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.04.013 · Cited by 681
Giro-Paloma, J., Martínez, M., Cabeza, L. F., & Fernández, A. I. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.040 · Cited by 597
A review on supercooling of Phase Change Materials in thermal energy storage systems
Safari, A., Saidur, R., Sulaiman, F. A., Xu, Y., & Dong, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.272 · Cited by 594
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109579 · Cited by 519
Self-citationLin, Y., Alva, G., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2018.09.128 · Cited by 502
Milián, Y. E., Gutiérrez, A., Grágeda, M., & Ushak, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.159 · Cited by 491
Yinping, Z., Yi, J., & Yi, J. (1999) · Measurement Science and Technology · doi:10.1088/0957-0233/10/3/015 · Cited by 489
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Dynamics of energy use, technological innovation, economic growth and trade openness in Malaysia
Sohag, K., Begum, R. A., Abdullah, S. M. S., & Jaafar, M. (2015) · Energy · doi:10.1016/j.energy.2015.06.101 · Cited by 428
Phase change materials and energy efficiency of buildings: A review of knowledge
da Cunha, S. R. L., & de Aguiar, J. L. B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101083 · Cited by 428
Pandey, A. K., Hossain, M. S., Tyagi, V. V., Abd Rahim, N., Selvaraj, J. A. /., & Sari, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.043 · Cited by 423
Review on building energy performance improvement using phase change materials
Song, M., Niu, F., Mao, N., Hu, Y., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.066 · Cited by 418
A review on the utilization of hybrid renewable energy
Guo, S., Liu, Q., Sun, J., & Jin, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.105 · Cited by 408
Combining thermal energy storage with buildings – a review
Heier, J., Bales, C., & Martin, V. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.031 · Cited by 389
Chandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.070 · Cited by 359
A review on the application of Trombe wall system in buildings
Hu, Z., He, W., Ji, J., & Zhang, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.003 · Cited by 349
Navarro, L., de Gracia, A., Colclough, S., Browne, M., McCormack, S. J., Griffiths, P., & Cabeza, L. F. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.11.040 · Cited by 318
Kabeel, A. E., Khalil, A., Shalaby, S. M., & Zayed, M. E. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.068 · Cited by 303
Experimental study of under-floor electric heating system with shape-stabilized PCM plates
Lin, K., Zhang, Y., Xu, X., Di, H., Yang, R., & Qin, P. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.06.017 · Cited by 297
Reddy, K. S., Mudgal, V., & Mallick, T. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.005 · Cited by 290
Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review
Kasaeian, A., bahrami, L., Pourfayaz, F., Khodabandeh, E., & Yan, W.-M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.037 · Cited by 287
Navarro, L., de Gracia, A., Niall, D., Castell, A., Browne, M., McCormack, S. J., Griffiths, P., & Cabeza, L. F. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.06.064 · Cited by 283
Huang, X., Alva, G., Jia, Y., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.048 · Cited by 278
Integration of passive PCM technologies for net-zero energy buildings
Stritih, U., Tyagi, V. V., Stropnik, R., Paksoy, H., Haghighat, F., & Joybari, M. M. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.04.036 · Cited by 238
Zayed, M. E., Zhao, J., Li, W., Elsheikh, A. H., Elbanna, A. M., Jing, L., & Geweda, A. E. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101341 · Cited by 234
Aslfattahi, N., Saidur, R., Arifutzzaman, A., Sadri, R., Bimbo, N., Sabri, M. F. M., Maughan, P. A., Bouscarrat, L., Dawson, R. J., Said, S. M., et al. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101115 · Cited by 231
Memon, S. A., Cui, H., Zhang, H., & Xing, F. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.11.022 · Cited by 227
A review on the air-PCM-TES application for free cooling and heating in the buildings
Iten, M., Liu, S., & Shukla, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.007 · Cited by 226
Benefits of PCM underfloor heating with PCM wallboards for space heating in winter
Devaux, P., & Farid, M. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.060 · Cited by 223
Novel concept of composite phase change material wall system for year-round thermal energy savings
Diaconu, B., & Cruceru, M. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.012 · Cited by 221
Morrison, D. J., & Abdel-Khalik, S. I. (1978) · Solar Energy · doi:10.1016/0038-092x(78)90141-x · Cited by 220
A new kind of phase change material (PCM) for energy-storing wallboard
Chen, C., Guo, H., Liu, Y., Yue, H., & Wang, C. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.07.002 · Cited by 219
Critical review of latent heat storage systems for free cooling in buildings
Zeinelabdein, R., Omer, S., & Gan, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.046 · Cited by 216
Marin, P., Saffari, M., de Gracia, A., Zhu, X., Farid, M. M., Cabeza, L. F., & Ushak, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.08.007 · Cited by 210
Fang, X., Fan, L.-W., Ding, Q., Yao, X.-L., Wu, Y.-Y., Hou, J.-F., Wang, X., Yu, Z.-T., Cheng, G.-H., & Hu, Y.-C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.016 · Cited by 209
Solé, A., Miró, L., Barreneche, C., Martorell, I., & Cabeza, L. F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.066 · Cited by 209
Zhou, G., & He, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.10.058 · Cited by 207
Experimental study of a ventilated facade with PCM during winter period
de Gracia, A., Navarro, L., Castell, A., Ruiz-Pardo, Á., Alvárez, S., & Cabeza, L. F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.10.026 · Cited by 202
PCM thermal storage system for ‘free’ heating and cooling of buildings
Osterman, E., Butala, V., & Stritih, U. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.04.012 · Cited by 197
Esakkimuthu, S., Hassabou, A. H., Palaniappan, C., Spinnler, M., Blumenberg, J., & Velraj, R. (2013) · Solar Energy · doi:10.1016/j.solener.2012.11.006 · Cited by 183
Atinafu, D. G., Dong, W., Huang, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.025 · Cited by 182
Energy investigation of glazed windows containing Nano-PCM in different seasons
Li, D., Wu, Y., Liu, C., Zhang, G., & Arıcı, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.07.015 · Cited by 182
He, M., Yang, L., Lin, W., Chen, J., Mao, X., & Ma, Z. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100874 · Cited by 181
Berardi, U., & Soudian, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2018.12.016 · Cited by 174
Cui, H., Tang, W., Qin, Q., Xing, F., Liao, W., & Wen, H. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.10.072 · Cited by 173
Melting and solidification of PCMs inside a spherical capsule: A critical review
Kenisarin, M. M., Mahkamov, K., Costa, S. C., & Makhkamova, I. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101082 · Cited by 168
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.027 · Cited by 166
Kheradmand, M., Azenha, M., de Aguiar, J. L. B., & Castro-Gomes, J. P. (2015) · Energy · doi:10.1016/j.energy.2015.10.131 · Cited by 163
Review of Phase Change Materials Integrated in Building Walls for Energy Saving
Cui, Y., Xie, J., Liu, J., & Pan, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.09.027 · Cited by 163
Elaboration and properties of a composite bio-based PCM for an application in building envelopes
Boussaba, L., Foufa, A., Makhlouf, S., Lefèbvre, G., & Royon, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.098 · Cited by 163
Putra, N., Rawi, S., Amin, M., Kusrini, E., Kosasih, E. A., & Indra Mahlia, T. M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.007 · Cited by 162
Johra, H., & Heiselberg, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.145 · Cited by 158
Yang, H., Wang, Y., Yu, Q., Cao, G., Sun, X., Yang, R., Zhang, Q., Liu, F., Di, X., Li, J., et al. (2018) · Energy · doi:10.1016/j.energy.2018.06.207 · Cited by 157
Kośny, J., Kossecka, E., Brzezinski, A., Tleoubaev, A., & YARBROUGH, D. W. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.05.021 · Cited by 156
Iten, M., Liu, S., & Shukla, A. (2018) · Energy · doi:10.1016/j.energy.2018.04.128 · Cited by 155
Royon, L., Karim, L., & Bontemps, A. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.03.042 · Cited by 154
Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates
Lin, K., Zhang, Y., Xu, X., Di, H., Yang, R. C., & Qin, P. (2004) · Building and Environment · doi:10.1016/j.buildenv.2004.04.005 · Cited by 153
Ali, M. A., Fayaz, Viegas, R. F., Kumar, M. B. S., Rajendrakumar, K., & Feroskhan, M. M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100982 · Cited by 147
Effect of thermal conductivities of shape stabilized PCM on under-floor heating system
Cheng, W.-L., Xie, B., Zhang, R., Xu, Z., & Xia, Y. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.055 · Cited by 146
Ye, R., Lin, W., Yuan, K., Fang, X., & Zhang, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.049 · Cited by 142
Huang, K., Feng, G., & Zhang, J. “. (2014) · Solar Energy · doi:10.1016/j.solener.2014.03.009 · Cited by 138
Experimental study on the performance of a novel solar water heating system with and without PCM
Wu, W. H., Dai, S., Liu, Z., et al. (2018) · Solar Energy · doi:10.1016/j.solener.2018.07.005 · Cited by 137
Ghoneim, A. A. (1989) · Solar Energy · doi:10.1016/0038-092x(89)90013-3 · Cited by 136
Abuşka, M., Şevik, S., & Kayapunar, A. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.056 · Cited by 135
Heat transfer studies of building brick containing phase change materials
Kant, K., Shukla, A., & Sharma, A. (2017) · Solar Energy · doi:10.1016/j.solener.2017.07.072 · Cited by 134
Radiant floors integrated with PCM for indoor temperature control
Ansuini, R., Larghetti, R., Giretti, A., & Lemma, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.07.018 · Cited by 133
Energy performance and economic analysis of a TIM-PCM wall under different climates
Souayfane, F., Biwolé, P. H., Fardoun, F., & Achard, P. (2018) · Energy · doi:10.1016/j.energy.2018.12.116 · Cited by 131
Optimization of a solar air heater with phase change materials: Experimental and numerical study
Moradi, R., Kianifar, A., & Wongwises, S. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.07.011 · Cited by 130
Saafi, K., & Daouas, N. (2019) · Energy · doi:10.1016/j.energy.2019.115987 · Cited by 130
Kadivar, M., Ardekani, M. M., Sapin, P., & Markides, C. N. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101030 · Cited by 129
Griffiths, P. W., & Eames, P. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.07.009 · Cited by 127
Wen, R., Zhang, W., Lv, Z., Huang, Z., & Gao, W. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.12.008 · Cited by 123
Yang, K. Y., Zhu, N., Chen, C., Wang, D., Yang, S. R., & Ma, S. (2018) · Energy · doi:10.1016/j.energy.2018.10.022 · Cited by 121
Saeed, R. M., Schlegel, J. P., Castano, C. H., et al. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.08.005 · Cited by 120
Parametric analysis of using PCM walls for heating loads reduction
Wang, Q., Wu, R., Wu, Y., & Zhao, C. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.05.012 · Cited by 120
Yang, W., Xu, R., Yang, B., et al. (2019) · Energy · doi:10.1016/j.energy.2019.02.172 · Cited by 116
Energy saving evaluation of passive systems for residential buildings in hot and dry regions
Goudarzi, H., & Mostafaeipour, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.002 · Cited by 115
Kong, X., Wang, L., Li, H., et al. (2019) · Solar Energy · doi:10.1016/j.solener.2019.11.081 · Cited by 114
Assessment of latent heat thermal storage systems operating with multiple phase change materials
N., L. N. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.04.008 · Cited by 113
Alizadeh, M., & Sadrameli, S. M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.168 · Cited by 112
Apparent heat capacity method to investigate heat transfer in a composite phase change material
KHATTARI, Y., Rhafiki, T. E., Choab, N., Kousksou, T., Alaphilippe, M., & Zéraouli, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101239 · Cited by 112
Ahmed, K., Bhattacharya, M., Shaikh, Z. H., Ramzan, M., & Öztürk, İ. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.008 · Cited by 111
Zhu, N., Hu, N., Hu, P., Lei, F., & Li, S. (2018) · Energy · doi:10.1016/j.energy.2018.11.042 · Cited by 110
Passive cooling potential in buildings under various climatic conditions in India
Panchabikesan, K., Kumaresan, V., & Velraj, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.030 · Cited by 108
Sarı, A., Sharma, R. K., Hekimoğlu, G., & Tyagi, V. V. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.008 · Cited by 108
Plytaria, M. T., Tzivanidis, C., Bellos, E., et al. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.08.010 · Cited by 100
Diarce, G., Campos‐Celador, Á., Martín-Escudero, K., Urresti, A., García-Romero, A., & Sala, J. M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.080 · Cited by 99
Application of an active PCM storage system into a building for heating/cooling load reduction
Gholamibozanjani, G., & Farid, M. M. (2020) · Energy · doi:10.1016/j.energy.2020.118572 · Cited by 98
Kara, Y. A., & Seyhan, A. K. (2012) · Solar Energy · doi:10.1016/j.solener.2012.05.012 · Cited by 95
PCM addition inside solar water heaters: Numerical comparative approach
Bouhal, T., Rhafiki, T. E., Kousksou, T., et al. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.08.005 · Cited by 94
Phase Change Materials for Application in Energy-Efficient Buildings
Jelle, B. P., & Kalnæs, S. E. (2017) · Cost-Effective Energy Efficient Building Retrofitting · doi:10.1016/b978-0-08-101128-7.00003-4 · Cited by 90
Mourid, A., Alami, M. E., & Kuznik, F. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.04.031 · Cited by 89
Maccarini, A., Hultmark, G., Bergsøe, N. C., et al. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.06.016 · Cited by 89
Jeong, S., Wi, S., Chang, S. J., Lee, J., & Kim, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.037 · Cited by 88
Zhang, Y., Zhang, J., Li, X., & Wu, X. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.12.022 · Cited by 86
A comparison between passive and active PCM systems applied to buildings
Gholamibozanjani, G., & Farid, M. M. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.08.007 · Cited by 86
Sun, X., Lee, K. O., Medina, M. A., Chu, Y., & Li, C. (2018) · Phase Transitions · doi:10.1080/01411594.2018.1469019 · Cited by 83
Solar facade module for nearly zero energy building
Vanaga, R., Blumberga, A., Freimanis, R., Mols, T., & Blumberga, D. (2018) · Energy · doi:10.1016/j.energy.2018.04.167 · Cited by 82
Thermal performance of non-ventilated multilayer glazing facades filled with phase change material
Liu, C., Zhang, G., Arıcı, M., Bian, J., & Li, D. (2018) · Solar Energy · doi:10.1016/j.solener.2018.11.044 · Cited by 80
Fadl, M., & Eames, P. (2019) · Energy · doi:10.1016/j.energy.2019.116083 · Cited by 80
Zhang, Z., Alva, G., Gu, M., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2018.06.006 · Cited by 79
Morovat, N., Athienitis, A. K., Candanedo, J. A., & Dermardiros, V. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.06.022 · Cited by 79
Development of high performance PCM cement composites for passive solar buildings
Bao, X., Tian, Y., Yuan, L., Cui, H., Tang, W., Ivan, W. H. F., & Qi, H. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.04.011 · Cited by 78
Cai, Y., Song, L., He, Q., Yang, D., & Hu, Y. Z. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.02.013 · Cited by 77
de Gracia, Á., Navarro, L., Coma, J., Serrano, S., Romaní, J., Pérez, G., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.109 · Cited by 77
Venkitaraj, K. P., Suresh, S., M, P. B., & Nair, S. C. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.02.005 · Cited by 77
Piselli, C., Castaldo, V. L., & Pisello, A. L. (2018) · Solar Energy · doi:10.1016/j.solener.2018.06.047 · Cited by 75
Karim, L., Barbeon, F., Gégout, P., Bontemps, A., & Royon, L. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.056 · Cited by 73
Zhou, Y., Zheng, S., & Zhang, G. (2019) · Energy · doi:10.1016/j.energy.2019.04.173 · Cited by 72
Stritih, U., Charvát, P., Koželj, R., Klimeš, L., Osterman, E., Ostrý, M., & Butala, V. (2017) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.10.018 · Cited by 71
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2021) · CRC Press eBooks · doi:10.1201/9780367567699-19 · Cited by 69
Thermal building control using active ventilated block integrating phase change material
Laaouatni, A., Martaj, N., Bennacer, R., Lachi, M., Omari, M. E., & Ganaoui, M. E. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.01.024 · Cited by 68
Sun, X., Medina, M. A., Lee, K. O., & Jin, X. (2018) · Energy · doi:10.1016/j.energy.2018.08.159 · Cited by 66
Developing a PCM-enhanced mortar for thermally active precast walls
Olivieri, L., Ríos, J. A. T., Revuelta, D., Navarro, L., & Cabeza, L. F. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.013 · Cited by 64
Adaptability research on phase change materials based technologies in China
Zeng, C., Liu, S., & Shukla, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.117 · Cited by 56
Li, C., Yu, H., & Song, Y. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.11.032 · Cited by 55
Experimental investigation of the daily thermal performance of a mPCM honeycomb wallboard
Wang, S.-M., Matiašovský, P., Mihálka, P., & Lai, C.-M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.080 · Cited by 54
Ranjbar, S. G., Roudini, G., & Barahuie, F. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101168 · Cited by 54
Liu, F., Zhu, J., Liu, J., Ma, B., Zhou, W., & Li, R. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.076 · Cited by 51
Young, B. A., Falzone, G., Wei, Z., Sant, G., & Pilon, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.160 · Cited by 51
Kim, H. B., Masayuki, M. A. E., & Choi, Y. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.08.038 · Cited by 47
Diurnal performance analysis of phase change material walls
Kara, Y. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.141 · Cited by 42
Said, M. A., & Hassan, H. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.109353 · Cited by 42
Putri, W. A., Fahmi, Z., Sutjahja, I. M., Kurnia, D., & Wonorahardjo, S. (2016) · Journal of Physics Conference Series · doi:10.1088/1742-6596/739/1/012065 · Cited by 31
Solar Absorption in a Ventilated Facade with PCM. Experimental Results
de Gracia, Á., Navarro, L., Castell, A., Ruiz–Pardo, Á., Domínguez, S. Á., & Cabeza, L. F. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.11.111 · Cited by 30
Empirical equation to estimate viscosity of paraffin
Ferrer, G., Gschwander, S., Solé, A., Barreneche, C., Fernández, A. I., Schossig, P., & Cabeza, L. F. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.03.002 · Cited by 28
Single and combined phase change materials: Their effect on seasonal transition period
Memarian, S., Kari, B. M., Fayaz, R., & Asadi, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.03.085 · Cited by 28
Poole, M. R., Shah, S. B., Boyette, M. D., Stikeleather, L. F., & Cleveland, T. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.12.027 · Cited by 26
Pisello, A. L., Fabiani, C., & Cotana, F. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.08.133 · Cited by 18
Remarks on “thermal energy storage using sodium sulfate decahydrate and water” [1]
Telkes, M. (1978) · Solar Energy · doi:10.1016/0038-092x(78)90150-0 · Cited by 15
Wong, R., Al-Jethelah, M. S. M., Ebadi, S., Singh, A., & Mahmud, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.005 · Cited by 13
Optimization of the phase-change wallboard test method: Experimental and numerical investigation
Song, Y., Li, C., Yu, H., Tang, Y., & Xia, Z. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101559 · Cited by 9
Cited by
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Phase Change Materials Application in Battery Thermal Management System: A Review
Liu, C., Xu, D., Weng, J., Zhou, S., Li, W., Wan, Y., Jiang, S., Zhou, D., Wang, J., & Huang, Q. (2020) · Materials · doi:10.3390/ma13204622 · Cited by 282
Phase change materials integrated into building walls: An updated review
Lamrani, B., Johannes, K., & Kuznik, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110751 · Cited by 274
Zheng, X., Bao, Y., Huang, A., Yu, L., & Qin, G. (2023) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2023.107022 · Cited by 24
Metadata
- Authors
- Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 33
- Pages
- 101913
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3090768412
- Cited by
- 354
- References
- 145
- FWCI
- 21.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.