The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Performance investigation of a passive battery thermal management system applied with phase change material
Abstract
Abstract Lithium-ion batteries will produce a lot of heat during working, which can increase the temperature and temperature difference in the battery module, and seriously impair the capacity, life, and safety of the batteries. Therefore, an effective thermal management system should be implemented to control the temperature of the batteries, while reducing the energy consumption and cost of the system as much as possible. In this paper, a passive, low-cost battery thermal management system consisting of pouch lithium-ion cells and phase change material units is designed. Based on the heat production process of the battery and heat transfer theory of the phase change material, a numerical model is built and the performance of the thermal management system is analyzed. It is found that the phase change material units can effectively decrease the maximum temperature and the maximum temperature difference on the cell at the end of discharge, and thus have good heat storage capability and temperature equalization capability. After insulating heat dissipation from the surfaces of the phase change material units, a temperature retaining function can also be achieved. The effects of the design parameters of the phase change material unit on its thermal management performance are further investigated, including the thermal conductivity, viscosity, and latent heat of the phase change material, the thickness of the phase change material unit, and the thermal conductivity of the unit shell. It could provide theoretical references and technical means for the design and implementation of passive, low-cost battery thermal management systems applied with phase change materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Cited by
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Self-citationThermal behaviour and thermal runaway propagation in lithium-ion battery systems – A critical review
Mallick, S., & Gayen, D. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106894 · Cited by 372
Zhang, J., Shao, D., Jiang, L., Zhang, G., Wu, H., Day, R., & Jiang, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112207 · Cited by 263
Metadata
- Authors
- Wang, Y., Wang, Z., Min, H., Li, H., & Li, Q.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 35
- Pages
- 102279
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3124121165
- Cited by
- 161
- References
- 2
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.