Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The helium and oxygen gas barrier properties of poly(lactide) were investigated as a function of stereochemistry and crystallinity degree. Poly(l-lactide) and poly(d,l-lactide) films were obtained by extrusion and thermally cold crystallized in either α′- or α-crystalline form with increasing crystallinity degree. Annealing of the films at low temperatures yielded to α′-crystals as well as the creation of a rigid amorphous fraction in the amorphous phase. Unexpectedly, the quantity of the rigid amorphous fraction was highest in poly(l-lactide) crystallized under α′-form. Unexpectedly, the gas permeability increased with increasing quantity of α′-crystals in poly(l-lactide) and remained constant with increasing quantity of α′-crystals in poly(d,l-lactide). A gain in gas barrier properties was obtained upon crystallization at higher temperatures yielding α-crystals. The analysis of the oxygen transport parameters, in particular the diffusion and the solubility coefficient showed that the diffusion was accelerated upon crystallization, while the solubility coefficient decreased in an expected manner which led to conclude that it remained constant in the amorphous phase. The acceleration of the diffusion seems to be correlated to the occurrence of the rigid amorphous fraction, which holds larger free volume. To conclude, for optimization of poly(lactide) gas barrier properties by focussing on the decrease of the diffusion coefficient it can be suggested to work with poly(d,l-lactide) and to aim a crystallization in α-form avoiding the formation of a rigid amorphous fraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296 · cited 2×
“We concluded for a change of crystalline form from a0 to a with increasing temperature for both PLA stereochemistries, which is in accordance with current literature [13,33].”
Auras, R. A., Singh, S. P., & Singh, J. J. (2005) · Packaging Technology and Science · doi:10.1002/pts.692 · Cited by 286
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Influence of Semicrystalline Morphology on the Glass Transition of Poly(L‐lactic acid)
Wang, Y., Funari, S. S., & Mano, J. F. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600114 · Cited by 104
Cited by
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Rabnawaz, M., Wyman, I., Auras, R., & Cheng, S. (2017) · Green Chem. · doi:10.1039/c7gc02521a · Cited by 406
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Metadata
- Authors
- Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2012-04
- Volume
- 48
- Issue
- 4
- Pages
- 779-788
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W2144697320
- Cited by
- 125
- References
- 8
- FWCI
- 5.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2012.01.014
- The paper
- Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2012). Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2012.01.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.