The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Vanillin-based degradable epoxy vitrimers: Reprocessability and mechanical properties study
Abstract
The preparation of vanillin-based epoxy thermosets has attracted great attention in recent years, however, most of them could not be reprocessed once after curing procedures. In the present work, a vanillin-based epoxy vitrimer (Van-Ep/IPDA) with dynamic imine covalent bonds was prepared by curing mono-glycidyl structure of vanillin (Van-Ep) with isophorone diamine (IPDA) hardener, which simultaneously exhibits the excellent reprocessability and acid degradable behavior. The mechanical properties of Van-Ep/IPDA vitrimers and cured bisphenol A (E51) epoxy are kept at the same level, which the Young’s modulus, elongation and tensile strength at break of Van-Ep/IPDA vitrimers reach 2.30 GPa, 4.4% and 65.0 MPa, respectively. Importantly, compared with these of original vitrimers, all reprocessed Van-Ep/IPDA vitrimers exhibit the same level of mechanical properties even after three times of hot pressing. Thanks to the imine structure, epoxy vitrimers also exhibit degradable property under acid solution. This facile approach of imine chemistry for preparing vanillin-based epoxy vitrimers sets up an important framework for designing sustainable polymer materials with excellent reprocessability and degradability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
High-performance vitrimers from commodity thermoplastics through dioxaborolane metathesis
Röttger, M., Domenech, T., van der Weegen, R., Breuillac, A., Nicolaÿ, R., & Leibler, L. (2017) · Science · doi:10.1126/science.aah5281 · Cited by 1,394
Heat‐ or Water‐Driven Malleability in a Highly Recyclable Covalent Network Polymer
Taynton, P., Yu, K., Shoemaker, R. K., Jin, Y., Qi, H. J., & Zhang, W. (2014) · Advanced Materials · doi:10.1002/adma.201400317 · Cited by 890
Reprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
Cited by
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Functional epoxy vitrimers and composites
Yang, Y., Xu, Y., Ji, Y., & Wei, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100710 · Cited by 463
Biobased vitrimers: Towards sustainable and adaptable performing polymer materials
Lucherelli, M. A., Duval, A., & Avérous, L. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101515 · Cited by 291
Xu, X., Ma, S., Wu, J., Yang, J., Wang, B., Wang, S., Li, Q., Feng, J., You, S., & Zhu, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05293c · Cited by 285
Sustainable Epoxy Vitrimers from Epoxidized Soybean Oil and Vanillin
Zhao, X.-L., Liu, Y.-Y., Weng, Y., Li, Y.-D., & Zeng, J.-B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05727 · Cited by 277
Metadata
- Authors
- Yu, Q., Peng, X., Wang, Y., Geng, H., Xu, A., Zhang, X., Xu, W., & Ye, D.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 117
- Pages
- 55-63
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W2942650888
- Cited by
- 165
- References
- 5
- FWCI
- 6.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.