CoChat

Controlled delivery of dexamethasone and betamethasone from PLA electrospun fibers: A comparative study

Alves, Priscila E., Soares, Bluma G., Lins, Luanda C., Livi, Sebastien, Santos, Elizabete P. · 2019 · European Polymer Journal
Cited by 39

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Abstract Drug-loaded poly (lactic acid) (PLA) fibers were successfully prepared by electrospinning from the corresponding chloroform/dimethylformamide (7:3 v/v) solutions containing different amounts of dexamethasone acetate (DEX) or betamethasone 17-valerate (BET), used as steroid anti-inflammatory agents. In addition, the mechanical performance as well as the morphology of these fiber mats were investigated. Thus, the morphology of fiber mats composed of neat PLA and PLA containing DEX and BET was homogeneous with bead-free surface, as indicated by scanning electron microscopy (SEM) while the presence of DEX in the fiber mats resulted in significant increase of the tensile strength. Then, the release of these drugs from the electrospun mats was evaluated by UV-VIS spectroscopy showing that BET-loaded PLA presented better release profile than DEX-loaded PLA. After a burst release of around 34 and 28% for DEX- and BET-loaded PLA, respectively, during the first 5 h, both drugs were continuously released reaching a maximum of around 60 and 80% after 168 h for membranes loaded with 14% of DEX and BET, respectively. Moreover, the drug release efficiency was compared with PLA electrospun fiber mats having adsorbed drug prepared by solution casting. In summary, we have demonstrated that PLA/BET and PLA/DEX electrospun membranes present a promising drug delivery system for sustained release in topical applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.eurpolymj.2019.05.001

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 41

  1. Zhang, 2013, Advanced materials and processing for drug delivery: the past and the future, Adv. Drug Delivery Rev., 65, 104, 10.1016/j.addr.2012.10.003 · DOI · Paper page
  2. Kim, 2009, Engineered polymers for advanced drug delivery, Eur. J. Pharm. Biopharm., 71, 420, 10.1016/j.ejpb.2008.09.021 · DOI · Paper page
  3. Park, 2005, Biodegradable polymers for microencapsulation of drugs, Molecules, 10, 146, 10.3390/10010146 · DOI · Paper page
  4. Reneker, 1996, Nanometre diameter fibres of polymer, produced by electrospinning, Nanotechnology, 7, 216, 10.1088/0957-4484/7/3/009 · DOI · Paper page
  5. Thakkar, 2017, Electrospun polymeric nanofibers: new horizons in drug delivery, Eur. J. Pharm. Sci., 107, 148, 10.1016/j.ejps.2017.07.001 · DOI · Paper page
  6. Chen, 2018, Electrospinning: a enabling nanotechnology platform for drug delivery and regenerative medicine, Adv. Drug Deliv. Rev., 132, 188, 10.1016/j.addr.2018.05.001 · DOI · Paper page
  7. Herrero-Herrero, 2018, PLA/PCL electrospun membranes of tailored fibres diameter as drug delivery systems, Eur. Polym. J., 99, 445, 10.1016/j.eurpolymj.2017.12.045 · DOI
  8. Karami, 2013, Preparation and performance evaluations of electrospun poly(ε-caprolactone), poly(lactic acid), and their hybrid (50/50) nanofibrous mats containing thymol as an herbal drug for effective wound healing, J. Appl. Polym. Sci., 129, 756, 10.1002/app.38683 · DOI · Paper page
  9. Merrell, 2009, Curcumin-loaded poly(epsilon-caprolactone) nanofibres: diabetic wound dressing with anti-oxidant and anti-inflammatory properties, Clin. Exp. Pharmacol. Physiol., 36, 1149, 10.1111/j.1440-1681.2009.05216.x · DOI · Paper page
  10. Opanasopit, 2008, Electrospun poly(vinyl alcohol) fiber mats as carriers for extracts from the fruit hull of magnosteen, J. Cosmet. Sci., 59, 233
  11. Valério, 2019, Biopolymer-hydrophobic drug fibers and the delivery mechanisms for sustained release applications, Eur. Polym. J., 112, 400, 10.1016/j.eurpolymj.2019.01.016 · DOI
  12. Li, 2017, Poly(lactic acid) controlled drug delivery, Adv. Polym. Sci., 10.1007/12_2017_11 · DOI
  13. Sóti, 2015, Preparation and comparison of spray dried and electrospun bioresorbable drug delivery systems, Eur. Polym. J., 68, 671, 10.1016/j.eurpolymj.2015.03.035 · DOI
  14. Park, 2011, Controlled release of ketoprofen from electrospun porous polylactic acid (PLA) nanofibers, J. Polym. Res., 18, 1287, 10.1007/s10965-010-9531-0 · DOI
  15. Zeng, 2003, Biodegradable electrospun fibers for drug delivery, J. Controlled Release, 92, 227, 10.1016/S0168-3659(03)00372-9 · DOI · Paper page
  16. Wei, 2010, Preparation and characterization of the electrospun nanofibers loaded with clarithromycin, J. Appl. Polym. Sci., 118, 346, 10.1002/app.32363 · DOI
  17. Parwe, 2014, Synthesis of ciprofloxacin-conjugated poly (L-lactic acid) polymer for nanofiber fabrication and antibacterial evaluation, Int. J. Nanomedicine, 9, 1463
  18. Huo, 2015, Electrospinning preparation of timosaponin B-II-loaded PLLA nanofibers and their antitumor recurrence activities in vivo, J. Nanomater., 2015, 1, 10.1155/2015/367964 · doi:10.1155/2015/367964
  19. Yao, 2016, In vitro drug controlled-release behavior of an electrospun modified poly(lactic acid)/bacitracin drug delivery system, RSC Adv., 6, 515, 10.1039/C5RA22467E · DOI
  20. Zhu, 2017, Electrospun fibers of poly(L-lactic acid) containing lovastatin with potential applications in drug delivery, J. Appl. Polym. Sci. 134, 45287, 9
  21. Siakafaka, 2016, Novel electrospun nanofibrous matrices prepared from poly(lactic acid)/poly(butylenes adipate) blends for controlled release formulations of an anti-rheumatoid agent, Eur. J. Pharma. Sci., 88, 12, 10.1016/j.ejps.2016.03.021 · DOI
  22. Fan, 2013, Preparation and in vitro characterization of dexamethasone-loaded poly(D, L-lactic acid) microspheres embedded in poly(ethylene glycol)-poly(ε-caprolactone)-poly(ethylene glycol) hydrogel for orthopedic tissue engineering, J. Biomater. Appl., 28, 288, 10.1177/0885328212446097 · DOI
  23. Fan, 2014, Dexamethasone-loaded poly(D, L-lactic acid) microspheres/poly(ethylene glycol)-poly(ε-caprolactone)- poly(ethylene glycol) micelles composite for skin augmentation, J. Biomed. Nanotechnol., 10, 592, 10.1166/jbn.2014.1832 · doi:10.1166/jbn.2014.1832
  24. Li, 2018, Potential of rhBMP-2 and dexamethasone-loaded Zein/PLLA scaffolds for enhanced in vitro osteogenesis of mesenchymal stem cells, Coll. Surf. B: Biointerf., 169, 384, 10.1016/j.colsurfb.2018.05.039 · DOI
  25. Lee, 2016, Preparation and evaluation of dexamethasone-loaded electrospun nanofiber sheets as a sustained drug delivery system, Materials, 9, 12
  26. Li, 2015, Delivery of dexamethasone from electrospun PCL-PEO binary fibers and their effects on inflammation regulation, RSC Adv., 5, 34166, 10.1039/C5RA03099D · DOI
  27. Rubert, 2014, Dexamethasone encapsulated coaxial electrospun PCL/PEO hollow microfibers for inflammation regulation, RSC Adv., 4, 51537, 10.1039/C4RA08358J · DOI
  28. Vacanti, 2012, Localized delivery of dexamethasone from electrospun fibers reduces the foreing body response, Biomacromolecules, 13, 3031, 10.1021/bm300520u · DOI · Paper page
  29. Bhattarai, 2017, Comparison of electrospun and solvent cast polylactic acid (PLA)/poly(vinyl alcohol (PVA) inserts as potential ocular drug delivery vehicles, Mater. Sci. Eng. C, 77, 895, 10.1016/j.msec.2017.03.305 · DOI
  30. Martins, 2010, Osteogenic induction of hBMSCs by electrospun scaffolds with dexamethasone release functionality, Biomaterials, 31, 5875, 10.1016/j.biomaterials.2010.04.010 · DOI · Paper page
  31. Lamprecht, 2000, Biodegradable microparticles as a two-drug controlled release formulation: a potential treatment of inflammatory bowel disease, J. Control. Release, 69, 445, 10.1016/S0168-3659(00)00331-X · DOI
  32. Ishihara, 2005, Role of zinc in formulation of PLGA/PLA nanoparticles encapsulating betamethasone phosphate and its release profile, J. Control. Release, 105, 68, 10.1016/j.jconrel.2005.02.026 · DOI
  33. Matsuo, 2009, Effect of betamethasone phosphate loaded polymeric nanoparticles on a murine asthma model, Cellular Immun., 260, 33, 10.1016/j.cellimm.2009.07.004 · DOI
  34. You, 2006, Effect of solution properties on nanofibrous structure of electrospun poly(lactic-co-glycolic acid), J. Appl. Polym. Sci., 99, 1214, 10.1002/app.22602 · doi:10.1002/app.22602
  35. Mane, 2016, Crosslinked polymer embedded Cu/Ag for comparative drug adsorption and kinetics evaluation, Intern. J. Polym. Mater. and Polym. Biomater., 65, 285, 10.1080/00914037.2015.1119684 · DOI
  36. Moghimipour, 2013, Preparation and characterization of dexamethasone microemulsion based on pseudoternary phase diagram, Junishapur J. Nat. Pharm. Prod., 8, 105
  37. Emami, 2011, The effect of isopropanol addition on enhancement of transdermal controlled release of ibuprofen from ethylene vinyl acetate copolymer membranes, J. Appl. Polym. Sci., 122, 3048, 10.1002/app.34367 · doi:10.1002/app.34367
  38. Casper, 2004, Controlling surface morphology of electrospun polystyrene fibers: effect of humidity and molecular weight in the electrospinning process, Macromolecules, 37, 573, 10.1021/ma0351975 · DOI · Paper page
  39. Zeng, 2004, Enzymatic degradation of poly(L-lactide) and poly(ε-caprolactone) electrospun fibers, Macromol. Biosci., 4, 1118, 10.1002/mabi.200400092 · DOI · Paper page
  40. Lins, 2015, Phosphonium ionic liquids as new compatibilizing agents of biopolymer blends composed of poly(butylenes adipate-co-terephthalate)/ poly(lactic acid) (PBAT/PLA), RSC Adv, 5, 59082, 10.1039/C5RA10241C · DOI · Paper page
  41. Cartier, 2000, Epitaxial crystallization and crystalline polymorphism of polylactides, Polymer, 41, 8909, 10.1016/S0032-3861(00)00234-2 · DOI · Paper page

Cited by

See all 39

Metadata

Authors
Alves, P. E., Soares, B. G., Lins, L. C., Livi, S., & Santos, E. P.
Venue
European Polymer Journal
Publisher
Elsevier BV
Published
2019-08
Volume
117
Pages
1-9
ISSN
0014-3057
Cited by
39
References
3
Language
en
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
  • Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro (E-26/201.183/2014)
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico (303457/2013-9)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.