The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
4D printing of shape memory polymers
Abstract
Abstract The desideration to expedite sophisticated intelligence and to have an interdisciplinary accession of new forms of complexities lead to the inauguration of a modern additive manufacturing (AM) technology that adopts computer-aided design (CAD) models. 3D printing with its efficiency in material utility, surface resolution, and fine design triggered the research domain making it applicable from biomedical to electronics, and most conspicuously in biomimetics, and advanced materials for its advantages of amenity and adept fabrication of objects. However, the static and inanimate nature of the 3D printed part and the anisotropic behaviour of the technology acted as the impediment in the 3D printing technology which was annihilated by the 4D printing by adding a temporal dimension to 3D providing vitality to the design using a stimulus to trigger transfiguration in smart materials. Smart materials consisting of hydrogels, ceramics, metals, alloys, and polymers, have the propensity to origami on exposure to specific extramural stimuli, like calefaction, light, moisture, active sources, electromagnetic radiations, and pH ascribed to martensitic transformation or intrinsic elasticity. However, the high stiffness, the dominant recoverable strain (~up to 800%), the ability to trigger their shape recoverability (in bending ~ 93% and tensile ~ 87%), the facile fabrication into tailor-made products, in which some exhibit biodegradability and biocompatibility, make polymers one of the most prominent materials for 4D printing. This review discusses recent advancements in 4D printing, focusing on smart polymers and cognate stimuli response, the compatibility of the material with the 3D printer, applications, and trends of 4D printing of SMP.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms
Macdonald, N. P., Cabot, J. M., Smejkal, P., Guijt, R. M., Paull, B., & Breadmore, M. C. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00136 · Cited by 425
Thermomechanics of the shape memory effect in polymers for biomedical applications
Gall, K., Yakacki, C. M., Liu, Y., Shandas, R., Willett, N., & Anseth, K. S. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30296 · Cited by 351
Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/12/125014 · Cited by 246
Cited by
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
4D printing: Perspectives for the production of sustainable plastics for agriculture
Maraveas, C., Bayer, I. S., & Bartzanas, T. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2021.107785 · Cited by 63
Metadata
- Authors
- Subash, A., & Kandasubramanian, B.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 134
- Pages
- 109771
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W3026064065
- Cited by
- 204
- References
- 15
- FWCI
- 12.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D printing of shape memory polymers. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2020.109771
- The paper
- Subash, A., & Kandasubramanian, B. (2020). 4D printing of shape memory polymers. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2020.109771
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.