Advancing sustainable shape memory polymers through 4D printing of polylactic acid-polybutylene adipate terephthalate blends
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
One of the major challenges in 4D printed Shape Memory Polymers (SMPs) is their slow response to thermal stimuli. Synthetic carbon fillers have been introduced to address this issue; however, their use comes with environmental concerns. On the other hand, Polylactic Acid (PLA) is commonly used for 3D/4D printing of SMPs, but it requires softening to achieve large deformations. This research paper introduces a sustainable solution through blending PLA with Polybutylene Adipate Terephthalate (PBAT) that not only addresses these challenges but also possesses environmental eco-friendliness due to PBAT’s high biodegradability rate. PBAT with weight percentages of 15 %, 30 %, and 45 % is utilized to soften PLA, and their composites are successfully 4D printed. Mechanical properties, shape memory effects, morphology, and thermal behaviors are comprehensively investigated. The results show that blending PLA with 45 % PBAT weight results in excellent features such as 220 % elongation and 93 % shape recovery in just a few seconds. The other two PLA-PBAT blends achieve complete shape recovery in less than 8 s. The PLA-PBAT contains 15 % PBAT, in addition to high strength (40 MPa), has 17 % elongation. This, coupled with the low melting temperature of PBAT, drives the high shape recovery rate. Scanning electron microscopy images finally confirm the high printability of all three blends, with the PLA-PBAT composite containing 30 % PBAT exhibiting the best quality in layer interfaces and the least porosity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jian, J., Xiangbin, Z., & Xianbo, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.001 · Cited by 625
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Razavi, M., & Wang, S.-Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00595 · Cited by 212
Deng, Y., Yu, C., Wongwiwattana, P., & Thomas, N. L. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1256-x · Cited by 193
Uncompatibilized PBAT/PLA Blends: Manufacturability, Miscibility and Properties
Su, S., Duhme, M., & Kopitzky, R. (2020) · Materials · doi:10.3390/ma13214897 · Cited by 159
Åkerlund, E., Diez-Escudero, A., Grzeszczak, A., & Persson, C. (2022) · Polymers · doi:10.3390/polym14163305 · Cited by 80
Cited by
Sooraj, V., Bhagavatula, S. G. K., & Kannan, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57087 · Cited by 16
Metadata
- Authors
- Rahmatabadi, D., Khajepour, M., Bayati, A., Mirasadi, K., Amin Yousefi, M., Shegeft, A., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., & Baghani, M.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2024-08
- Volume
- 216
- Pages
- 113289
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W4400454524
- Cited by
- 223
- References
- 5
- FWCI
- 23.32
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advancing sustainable shape memory polymers through 4D printing of polylactic acid-polybutylene adipate terephthalate blends. https://app.cochat.ai/papers/10.1016/j.eurpolymj.2024.113289
- The paper
- Rahmatabadi, D., Khajepour, M., Bayati, A., Mirasadi, K., Amin Yousefi, M., Shegeft, A., Ghasemi, I., Baniassadi, M., Abrinia, K., Bodaghi, M., & Baghani, M. (2024). Advancing sustainable shape memory polymers through 4D printing of polylactic acid-polybutylene adipate terephthalate blends. European Polymer Journal. https://doi.org/10.1016/j.eurpolymj.2024.113289
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.