The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Preparation of carbon dioxide adsorbents from the chemical activation of urea–formaldehyde and melamine–formaldehyde resins
Open accessAbstract
Abstract Adsorption is considered to be one of the more promising technologies for the capture of CO 2 from flue gases. In general, nitrogen enrichment is reported to be effective in enhancing the specific adsorbent–adsorbate interaction for CO 2 . Nitrogen enriched carbons were produced from urea–formaldehyde and melamine–formaldehyde resins polymerised in the presence of K 2 CO 3 as a chemical activation agent, with activation undertaken over a range of temperatures. CO 2 adsorption capacity was determined to be dependent upon both textural properties and more importantly nitrogen functionality. Adsorbents capable of capturing above 8 wt.% CO 2 at 25 °C were produced from the chemical activation of urea–formaldehyde resin at 500 °C. Chemical activation seems to produce more effective adsorbents than CO 2 activation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Some aspects of the surface chemistry of carbon blacks and other carbons
Boehm, H. P. (1994) · Carbon · doi:10.1016/0008-6223(94)90031-0 · Cited by 3,043
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041 · cited 1×
“Nitrogen incorporation has previously been demonstrated to enhance the adsorptive properties of activated carbons for hydrogen sulphide, SOx, NOx and acetaldehyde [14-17] and recently CO2 [18].”
BackgroundThe characterization of activated carbons with oxygen and nitrogen surface groups
Biniak, S., Szymański, G., Siedlewski, J., & Świątkowski, A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00096-1 · Cited by 1,513
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Preparation of activated carbon from lignin by chemical activation
Hayashi, J., Kazehaya, A., Muroyama, K., & Watkinson, A. P. (2000) · Carbon · doi:10.1016/s0008-6223(00)00027-0 · Cited by 743
Removal of SOx and NOx over activated carbon fibers
Mochida, I., Korai, Y., Shirahama, M., Kawano, S., Hada, T., Seo, Y., Yoshikawa, M., & Yasutake, A. (2000) · Carbon · doi:10.1016/s0008-6223(99)00179-7 · Cited by 414
Bituminous coal-based activated carbons modified with nitrogen as adsorbents of hydrogen sulfide
Bagreev, A., Menéndez, J. Á., Іvanenko, I., Tarasenko, Y. O., & Bandosz, T. J. (2004) · Carbon · doi:10.1016/j.carbon.2003.10.042 · Cited by 291
CO2 capture using some fly ash-derived carbon materials
Arenillas, A., Smith, K. M., Drage, T. C., & Snape, C. E. (2005) · Fuel · doi:10.1016/j.fuel.2005.04.003 · Cited by 263
Self-citationAdsorption/Oxidation of Hydrogen Sulfide on Nitrogen-Containing Activated Carbons
Adib, F., Bagreev, A., & Bandosz, T. J. (2000) · Langmuir · doi:10.1021/la990926o · Cited by 217
Methanol synthesis from flue-gas CO2 and renewable electricity: a feasibility study
Mignard, D. (2003) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(02)00082-4 · Cited by 182
Water adsorption on activated carbons with different degrees of oxidation
Carrasco-Marín, F., Mueden, A., Centeno, T. A., Stoeckli, F., & Moreno‐Castilla, C. (1997) · Journal of the Chemical Society Faraday Transactions · doi:10.1039/a608198c · Cited by 108
Synthesizing activated carbons from resins by chemical activation with K2CO3
Hayashi, J., Uchibayashi, M., Horikawa, T., Muroyama, K., & Gomes, V. G. (2002) · Carbon · doi:10.1016/s0008-6223(02)00151-3 · Cited by 75
Acetaldehyde Adsorption on Nitrogen-Containing Activated Carbons
Elsayed, Y., & Bandosz, T. J. (2002) · Langmuir · doi:10.1021/la0116948 · Cited by 67
CO2 removal potential of carbons prepared by co-pyrolysis of sugar and nitrogen containing compounds
Arenillas, A., Drage, T. C., Smith, K. M., & Snape, C. E. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.020 · Cited by 51
Self-citationLeci, C. L. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00277-4 · Cited by 36
Muroyama, K., Hayashi, J., Satô, A., & Takemoto, S. (1996) · TANSO · doi:10.7209/tanso.1996.95 · Cited by 16
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Metadata
- Authors
- Drage, T. C., Arenillas, A., Smith, K. M., Pevida, C., Piippo, S., & Snape, C. E.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2007-01
- Volume
- 86
- Issue
- 1-2
- Pages
- 22-31
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2145031179
- Cited by
- 259
- References
- 19
- FWCI
- 14.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.