The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Preparation of carbon dioxide adsorbents from the chemical activation of urea–formaldehyde and melamine–formaldehyde resins
Open accessAbstract
Abstract Adsorption is considered to be one of the more promising technologies for the capture of CO 2 from flue gases. In general, nitrogen enrichment is reported to be effective in enhancing the specific adsorbent–adsorbate interaction for CO 2 . Nitrogen enriched carbons were produced from urea–formaldehyde and melamine–formaldehyde resins polymerised in the presence of K 2 CO 3 as a chemical activation agent, with activation undertaken over a range of temperatures. CO 2 adsorption capacity was determined to be dependent upon both textural properties and more importantly nitrogen functionality. Adsorbents capable of capturing above 8 wt.% CO 2 at 25 °C were produced from the chemical activation of urea–formaldehyde resin at 500 °C. Chemical activation seems to produce more effective adsorbents than CO 2 activation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Some aspects of the surface chemistry of carbon blacks and other carbons
Boehm, H. P. (1994) · Carbon · doi:10.1016/0008-6223(94)90031-0 · Cited by 3,043
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041 · cited 1×
“Nitrogen incorporation has previously been demonstrated to enhance the adsorptive properties of activated carbons for hydrogen sulphide, SOx, NOx and acetaldehyde [14-17] and recently CO2 [18].”
BackgroundThe characterization of activated carbons with oxygen and nitrogen surface groups
Biniak, S., Szymański, G., Siedlewski, J., & Świątkowski, A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00096-1 · Cited by 1,513
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Preparation of activated carbon from lignin by chemical activation
Hayashi, J., Kazehaya, A., Muroyama, K., & Watkinson, A. P. (2000) · Carbon · doi:10.1016/s0008-6223(00)00027-0 · Cited by 743
Removal of SOx and NOx over activated carbon fibers
Mochida, I., Korai, Y., Shirahama, M., Kawano, S., Hada, T., Seo, Y., Yoshikawa, M., & Yasutake, A. (2000) · Carbon · doi:10.1016/s0008-6223(99)00179-7 · Cited by 414
Bituminous coal-based activated carbons modified with nitrogen as adsorbents of hydrogen sulfide
Bagreev, A., Menéndez, J. Á., Іvanenko, I., Tarasenko, Y. O., & Bandosz, T. J. (2004) · Carbon · doi:10.1016/j.carbon.2003.10.042 · Cited by 291
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
A review on surface modification of activated carbon for carbon dioxide adsorption
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Shamiri, A. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.07.006 · Cited by 1,128
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Chemical Technologies for Exploiting and Recycling Carbon Dioxide into the Value Chain
Peters, M., Köhler, B., Kuckshinrichs, W., Leitner, W., Markewitz, P., & Müller, T. E. (2011) · ChemSusChem · doi:10.1002/cssc.201000447 · Cited by 738
Progress in carbon capture technologies
Wilberforce, T., Olabi, A. G., Sayed, E. T., Elsaid, K., & Abdelkareem, M. A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143203 · Cited by 710
Metal-free doped carbon materials as electrocatalysts for the oxygen reduction reaction
Daems, N., Sheng, X., Vankelecom, I. F. J., & Pescarmona, P. P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14043a · Cited by 680
Rufford, T. E., Smart, S., Watson, G. C. Y., Graham, B. F., Boxall, J., Diniz da Costa, J. C., & May, E. F. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.06.016 · Cited by 676
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
Self-citationSurface modification of activated carbons for CO2 capture
Pevida, C., Plaza, M. G., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.05.239 · Cited by 468
Self-citationRestacking-Inhibited 3D Reduced Graphene Oxide for High Performance Supercapacitor Electrodes
Lee, J. H., Park, N., Kim, B. G., Jung, D. S., Im, K., Hur, J., & Choi, J. W. (2013) · ACS Nano · doi:10.1021/nn4040734 · Cited by 425
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Li, Q., Yang, J., Feng, D., Wu, Z., Wu, Q., Park, S. S., Ha, C.-S., & Zhao, D. (2010) · Nano Research · doi:10.1007/s12274-010-0023-7 · Cited by 369
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Chandra, V., Yu, S. U., Kim, S. H., Yoon, Y. S., Kim, D. Y., Kwon, A. H., Meyyappan, M., & Kim, K. S. (2012) · Chem. Commun. · doi:10.1039/c1cc15599g · Cited by 340
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Arami-Niya, A. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.127 · Cited by 328
Solid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
Self-citationGupta, S., & Kua, H. W. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001924 · Cited by 293
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Self-citationSaha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
Evaluation of solid sorbents as a retrofit technology for CO2 capture
Sjostrom, S., & Krutka, H. (2010) · Fuel · doi:10.1016/j.fuel.2009.11.019 · Cited by 271
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Self-citationGoel, C., Kaur, H., Bhunia, H., & Bajpai, P. K. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.06.002 · Cited by 89
Metadata
- Authors
- Drage, T. C., Arenillas, A., Smith, K. M., Pevida, C., Piippo, S., & Snape, C. E.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2007-01
- Volume
- 86
- Issue
- 1-2
- Pages
- 22-31
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2145031179
- Cited by
- 259
- References
- 19
- FWCI
- 14.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.