Influence of temperature and alumina catalyst on pyrolysis of corncob
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Corncob has been investigated as an alternative feedstock to obtain fuels and chemicals via pyrolysis in fixed-bed reactor. The influence of pyrolysis temperature in the range 300–800 °C as well as the catalyst effects on the products was investigated in detail and the obtained results were compared. The results indicated that a maximum oil yield of 22.2% was obtained at a moderate temperature of 600 °C. The oil yield was reduced when the temperature was increased from 600 to 800 °C, whereas the gas yield increased. Pyrolysis oils were examined by using instrumental analysis, 1 H NMR spectroscopy and GC/MS. This analysis revealed that the pyrolysis oils were chemically very heterogeneous at all temperatures. It was determined that the most abundant compounds composing the bio-oil were phenolics. It was observed that the catalyst decreased the reaction temperature. Most of the components obtained using a catalyst at moderate temperatures was close to those obtained at high temperatures without using a catalyst. Moreover, the use of a catalyst and the high temperatures of the reactions also decreased the amount of oxygenated compounds produced. According to these results, corncob bio-oils can be used as fuel and constitute a valuable source of chemical raw materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 2×
“Lignin, the other major component of biomass, has an aromatic character that makes it more stable [1,2].”
BackgroundIoannidou, O., Zabaniotou, A., Antonakou, E. V., Papazisi, K. M., Lappas, A. A., & Athanassiou, C. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.01.004 · Cited by 170
Ateş, F., & Işıkdağ, M. A. (2008) · Energy & Fuels · doi:10.1021/ef7006276 · Cited by 126
Self-citation
Cited by
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
“Some of these included Ni, CeO2, Al2O3 [170], alumina [171], sodium feldspar [9], CeO2, Rh, SiO2 [172], Li, Na, K carbonates [173], Na2CO3, K2CO3, ZnCl2 [174], Ni/SiO2-N [175], zeolite [176] and ZrO2 [177].”
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Operating parameters for bio-oil production in biomass pyrolysis: A review
Guedes, R. E., Luna, A. S., & Torres, A. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.019 · Cited by 619
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
The slow and fast pyrolysis of cherry seed
Duman, G., Okutucu, C., Ucar, S., Stahl, R., & Yanik, J. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.07.051 · Cited by 294
Metadata
- Authors
- Ateş, F., & Işıkdağ, M. A.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2009-10
- Volume
- 88
- Issue
- 10
- Pages
- 1991-1997
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2066951974
- Cited by
- 115
- References
- 3
- FWCI
- 4.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of temperature and alumina catalyst on pyrolysis of corncob. https://app.cochat.ai/papers/10.1016/j.fuel.2009.03.008
- The paper
- Ateş, F., & Işıkdağ, M. A. (2009). Influence of temperature and alumina catalyst on pyrolysis of corncob. Fuel. https://doi.org/10.1016/j.fuel.2009.03.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.