The DOI matches its Crossref record.
Optimization of fuel production from waste vehicle tires by pyrolysis and resembling to diesel fuel by various desulfurization methods
Abstract
In this study, an alternative fuel for diesel engines was produced from waste automobile tires by the method of pyrolysis. In order to reduce the high sulfur content of the fuel, CaO, Ca(OH) 2 , and NaOH catalysts were used. In addition, effects of variables such as temperature, the catalyst ratio and the N 2 flow rate on yield were investigated. The highest product yield was obtained with temperature of 500 °C and 200 cm 3 /min N 2 flow rate. When compared with the products obtained from initial pyrolysis, the sulfur content of the product was found to be 34.25% lower with the utilization of 5% Ca(OH) 2 in the reaction. In order to make the sulfur content of the product closer diesel fuel, the acetic acid–H 2 O 2 , formic acid–H 2 O 2 and H 2 SO 4 were used in different proportions. Although, the other acids were also very effective, the use of 10% H 2 SO 4 reduced sulfur content of the product by 75.27%. Thus, with 5% Ca(OH) 2 and then with addition of 10% H 2 SO 4 , the sulfur content of the product was reduced by 83.75%. The properties of diesel fuel (DF), liquid fuel derived from waste vehicle tires (TF), low sulfur tire fuel (LSTF) and fuel mixtures of LSTF–DF were analyzed. It was found that, the density and sulfur content of LSTF fuel were slightly higher than that of diesel fuel, but other features and distillation curves were very close to diesel fuel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pyrolysis of waste tyres: A review
Williams, P. T. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.003 · Cited by 807
Use of pyrolytic gas from waste tire as a fuel: A review
Czajczyńska, D., Krzyżyńska, R., Jouhara, H., & Spencer, N. (2017) · Energy · doi:10.1016/j.energy.2017.05.042 · Cited by 333
Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires
Hita, I., Arabiourrutia, M., Olazar, M., Bilbao, J., Arandes, J. M., & Castaño, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.081 · Cited by 268
Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine
Frigo, S., Seggiani, M., Puccini, M., & Vitolo, S. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.044 · Cited by 201
Antoniou, N., & Zabaniotou, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.005 · Cited by 194
Metadata
- Authors
- Aydın, H., & İlkılıç, C.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2012-12
- Volume
- 102
- Pages
- 605-612
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2058550878
- Cited by
- 203
- References
- 0
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization of fuel production from waste vehicle tires by pyrolysis and resembling to diesel fuel by various desulfurization methods. https://app.cochat.ai/papers/10.1016/j.fuel.2012.06.067
- The paper
- Aydın, H., & İlkılıç, C. (2012). Optimization of fuel production from waste vehicle tires by pyrolysis and resembling to diesel fuel by various desulfurization methods. Fuel. https://doi.org/10.1016/j.fuel.2012.06.067
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.