Analysis and comparison of bio-oils obtained by hydrothermal liquefaction and fast pyrolysis of beech wood
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
There are many different ways to convert biomass into liquid fuels, mostly referred to as bio-oils. This paper presents the analysis of bio-oils produced by hydrothermal liquefaction and fast pyrolysis of beech wood. Both processes have a wide panel of parameters that can be optimised influencing the oil quality. Results of the analysis show that both oils have high acidities. Iodine values indicate a high degree of unsaturations. These two qualities seem to be inversely proportional in the case of pyrolysis oils. In the case of hydrothermal conversion, additives to adjust the pH such as sodium hydroxide increase oil yields, lower its viscosity but do little to further improve the quality of the oils. For pyrolysis oils, increasing the severity does reduce acidity but at the expense of more unsaturations and a loss in yield. The results show that without extensive upgrading or refining, commercial fuel standards cannot be met. Specific norms and standards are being elaborated for pyrolysis used in specific installations. This paper shows how detailed analysis can help to optimise process parameters with an objective that goes beyond the mass or energy yield.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663 · cited 1×
“[22] the viscosity of bio-oils increases due to the aging effect.”
BackgroundChemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops
Mullen, C. A., & Boateng, A. A. (2008) · Energy & Fuels · doi:10.1021/ef700776w · Cited by 369
Water—A magic solvent for biomass conversion
Kruse, A., & Dahmen, N. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.09.038 · Cited by 325 · cited 1×
“Hydrothermal liquefaction (HTL) converts biomass in subcritical water [1].”
BackgroundDoassans-Carrère, N., Ferrasse, J.-H., Boutin, O., Mauviel, G., & Lédé, J. (2014) · Energy & Fuels · doi:10.1021/ef500641c · Cited by 49 · cited 2×
“From the literature it appears that hydrothermal oil produced in batch reactors [17,18] contain more oxygen than oil produced in continuous reactors [19,20].”
Background
Cited by
A review on hydrothermal liquefaction of biomass
Gollakota, A. R. K., Kishore, N., & Gu, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.178 · Cited by 1,306
A review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534
Cao, L., Zhang, C., Chen, H., Tsang, D. C. W., Luo, G., Zhang, S., & Chen, J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.08.196 · Cited by 310
Yang, X., Mills-Beale, J., & You, Z. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.100 · Cited by 299
Wu, Y., Wang, H., Li, H., Han, X., Zhang, M., Sun, Y., Fan, X., Tu, R., Zeng, Y., Xu, C. C., et al. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.07.031 · Cited by 274
Metadata
- Authors
- Haarlemmer, G., Guizani, C., Anouti, S., Déniel, M., Roubaud, A., & Valin, S.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2016-06
- Volume
- 174
- Pages
- 180-188
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2254789744
- Cited by
- 135
- References
- 4
- FWCI
- 4.71
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.