CoChat

Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States

Open access
Amini, Elham, Safdari, Mohammad-Saeed, DeYoung, Jonathan T., Weise, David R., Fletcher, Thomas H. · 2019 · Fuel
Cited by 108

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

Prescribed (i.e., controlled) burning is a common practice used in many vegetation types in the world to accomplish a wide range of land management objectives including wildfire risk reduction, wildlife habitat improvement, forest regeneration, and land clearing. To properly apply controlled fire and reduce unwanted fire behavior, an improved understanding of fundamental processes related to combustion of live and dead vegetation is needed. Since the combustion process starts with pyrolysis, there is a need for more data and better models of pyrolysis of live and dead fuels. In this study, slow pyrolysis experiments were carried out in a pyrolyzer apparatus under nitrogen atmosphere in two groups of experiments. In the first group, the effects of temperature (400–800 °C), a slow heating rate (5–30 °C min−1), and carrier gas flow rate (50–350 ml min−1) on yields of tar and light gas obtained from pyrolysis of dead longleaf pine litter were investigated to find the optimum condition which results in the maximum tar yield. The results showed that the highest tar yield was obtained at a temperature of 500 °C, heating rate of 30 °C min−1, and sweep gas flow rate of 100 ml min−1. In the second group of experiments, 14 plant species (live and dead) native to forests in the southern United States, were heated in the pyrolyzer apparatus at the optimum condition. A gas chromatograph equipped with a mass spectrometer (GC–MS) and a gas chromatograph equipped with a thermal conductivity detector (GC-TCD) were used to study the speciation of tar and light gases, respectively. The results showed that the tar composition is dominated by oxygenated aromatic compounds consisting mainly of phenols. The light gas analysis showed that CO and CO2 were the dominant light gas species for all plant samples on a dry wt% basis, followed by CH4 and H2.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.fuel.2018.08.112

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 108

Metadata

Authors
Amini, E., Safdari, M.-S., DeYoung, J. T., Weise, D. R., & Fletcher, T. H.
Venue
Fuel
Publisher
Elsevier BV
Published
2019-01
Volume
235
Pages
1475-1491
ISSN
0016-2361 (ISSN-L)
OpenAlex
W2799299111
Cited by
108
References
9
FWCI
6.04
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.