Effect of carbonization temperature on the physical properties and CO2 adsorption behavior of petroleum coke-derived porous carbon
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Abstract Cost-effective porous carbons for CO2 capture were developed from petroleum coke using KOH as an activating agent. In particular, the effect of the carbonization temperature on the physical properties and CO2 adsorption behavior of the prepared porous carbons was investigated while keeping the other conditions constant during KOH activation. The highest specific surface area and total pore volume of 1470 m2/g and 0.60 cm3/g were obtained for the porous carbon carbonized at 500 °C, with higher carbonization temperatures resulting in reduced porosities. XRD and FTIR analyses revealed that the structural disorder and amount of surface functional groups, both of which are favorable for porosity development during activation, had opposite trends with increasing carbonization temperature. Therefore, an optimal carbonization temperature existed for the maximum porosity. The porous carbon carbonized at 500 °C exhibited the highest CO2 adsorption capacity of 4.17 mmol/g at 25 °C and 1 bar owing to its highest narrow micropore volume (pore size of less than 0.8 nm). In addition to its high CO2 adsorption capacity, the prepared porous carbon presented good selectivity for CO2 over N2, moderate heat of adsorption, fast adsorption kinetics, facile regeneration, and stable adsorption working capacity during consecutive adsorption and desorption cycles, indicating its promise in practical CO2 capture applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99
Cited by
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Applied Machine Learning for Prediction of CO2 Adsorption on Biomass Waste-Derived Porous Carbons
Yuan, X., Suvarna, M., Low, S., Dissanayake, P. D., Lee, K. B., Li, J., Wang, X., & Ok, Y. S. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c01849 · Cited by 397
Self-citationYuan, X., Li, S., Jeon, S., Deng, S., Zhao, L., & Lee, K. B. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123010 · Cited by 162
Self-citationWang, P., Dai, J., Ma, Y., Chen, L., & Pan, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122495 · Cited by 59
Zhou, X., Zhu, L., Dong, W., & Jiang, M. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140546 · Cited by 41
Metadata
- Authors
- Jang, E., Choi, S. W., & Lee, K. B.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 248
- Pages
- 85-92
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2922667433
- Cited by
- 95
- References
- 4
- FWCI
- 6.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.