The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures
Abstract
Abstract To achieve a reduced chemical model for comprehensive prediction of ammonia/hydrogen/methane mixture combustion, a detailed chemical mechanism with 128 species and 957 reactions was first assembled using models from literature. Directed relation graph with error propagation (DRGEP) with sensitivity analysis reduction method was then used to obtain compact reaction models. The studied reduction conditions cover ɸ = 0.5–2.0, temperature 1000–2000 K, and pressure 0.1–5 MPa. Finally, two reduced models have been obtained: 28 species and 213 reactions for ammonia/hydrogen and 51 species and 420 reactions for ammonia/hydrogen/methane. Ignition delay times and laminar burning velocities for single component and fuel mixtures predicted using the detailed and reduced mechanisms were compared with available experiments. Results showed that both detailed and reduced mechanisms performed fairly well for ignition delays, while over-predicted laminar burning velocity at fuel-rich conditions for single ammonia fuel and mixtures. The 51 species reduced mechanism was also tested in non-premixed coflow hydrogen/methane jet flames, while 1%–50% mole ammonia were added to the fuel stream. Modelling results showed that this 51-species mechanism was suitable for CFD modelling, and the speedup factor was over 5 when using the reduced mechanism with different codes. The flame structure, as well as NO and NO2 formation was studied. High NO concentrations were found in high-temperature region near the stoichiometric zone, while NO2 was dominant in the lean flame zone. Reaction flux analysis was performed to better understand NH3 oxidation and NOx emissions at low- and high-temperature conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Science and technology of ammonia combustion
Kobayashi, H., Hayakawa, A., Somarathne, K. D. K. A., & Okafor, E. C. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.09.029 · Cited by 2,532
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.05.003 · Cited by 869
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
An efficient error-propagation-based reduction method for large chemical kinetic mechanisms
PEPIOTDESJARDINS, P., & Pitsch, H. G. (2008) · Combustion and Flame · doi:10.1016/j.combustflame.2007.10.020 · Cited by 850
Otomo, J., Koshi, M., Mitsumori, T., Iwasaki, H., & Yamada, K. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.066 · Cited by 837
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
Self-citation
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
A review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions
Lhuillier, C., Brequigny, P., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117448 · Cited by 618
Metadata
- Authors
- Li, R., Konnov, A. A., He, G., Qin, F., & Zhang, D.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 257
- Pages
- 116059
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2970579213
- Cited by
- 354
- References
- 48
- FWCI
- 10.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures. https://app.cochat.ai/papers/10.1016/j.fuel.2019.116059
- The paper
- Li, R., Konnov, A. A., He, G., Qin, F., & Zhang, D. (2019). Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures. Fuel. https://doi.org/10.1016/j.fuel.2019.116059
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.