The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Chemical mechanism development and reduction for combustion of NH3/H2/CH4 mixtures
Abstract
Abstract To achieve a reduced chemical model for comprehensive prediction of ammonia/hydrogen/methane mixture combustion, a detailed chemical mechanism with 128 species and 957 reactions was first assembled using models from literature. Directed relation graph with error propagation (DRGEP) with sensitivity analysis reduction method was then used to obtain compact reaction models. The studied reduction conditions cover ɸ = 0.5–2.0, temperature 1000–2000 K, and pressure 0.1–5 MPa. Finally, two reduced models have been obtained: 28 species and 213 reactions for ammonia/hydrogen and 51 species and 420 reactions for ammonia/hydrogen/methane. Ignition delay times and laminar burning velocities for single component and fuel mixtures predicted using the detailed and reduced mechanisms were compared with available experiments. Results showed that both detailed and reduced mechanisms performed fairly well for ignition delays, while over-predicted laminar burning velocity at fuel-rich conditions for single ammonia fuel and mixtures. The 51 species reduced mechanism was also tested in non-premixed coflow hydrogen/methane jet flames, while 1%–50% mole ammonia were added to the fuel stream. Modelling results showed that this 51-species mechanism was suitable for CFD modelling, and the speedup factor was over 5 when using the reduced mechanism with different codes. The flame structure, as well as NO and NO2 formation was studied. High NO concentrations were found in high-temperature region near the stoichiometric zone, while NO2 was dominant in the lean flame zone. Reaction flux analysis was performed to better understand NH3 oxidation and NOx emissions at low- and high-temperature conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Science and technology of ammonia combustion
Kobayashi, H., Hayakawa, A., Somarathne, K. D. K. A., & Okafor, E. C. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.09.029 · Cited by 2,532
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
An efficient error-propagation-based reduction method for large chemical kinetic mechanisms
PEPIOTDESJARDINS, P., & Pitsch, H. G. (2008) · Combustion and Flame · doi:10.1016/j.combustflame.2007.10.020 · Cited by 942
Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.05.003 · Cited by 869
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
Otomo, J., Koshi, M., Mitsumori, T., Iwasaki, H., & Yamada, K. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.066 · Cited by 837
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
Self-citationAn experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
Tian, Z., Li, Y., Zhang, L., Glarborg, P., & Qi, F. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.005 · Cited by 635
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.03.008 · Cited by 593
Hu, E., Huang, Z., He, J., Jin, C., & Zheng, J. J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.03.058 · Cited by 577
Molybdenum-catalysed ammonia production with samarium diiodide and alcohols or water
Ashida, Y., Arashiba, K., Nakajima, K., & Nishibayashi, Y. (2019) · Nature · doi:10.1038/s41586-019-1134-2 · Cited by 565
Ichikawa, A., Hayakawa, A., Kitagawa, Y., Kunkuma Amila Somarathne, K. D., Kudo, T., & Kobayashi, H. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.024 · Cited by 540
The role of NNH in NO formation and control
Klippenstein, S. J., Harding, L. B., Glarborg, P., & Miller, J. A. (2011) · Combustion and Flame · doi:10.1016/j.combustflame.2010.12.013 · Cited by 497
Ammonia–methane combustion in tangential swirl burners for gas turbine power generation
Valera-Medina, A., Marsh, R., Runyon, J., Pugh, D., Beasley, P., Hughes, T., & Bowen, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.02.073 · Cited by 480
Ammonia chemistry in oxy-fuel combustion of methane
Mendiara, T., & Glarborg, P. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.07.006 · Cited by 470
Study on using hydrogen and ammonia as fuels: Combustion characteristics and NOxformation
Li, J., Huang, H., Kobayashi, N., He, Z., & Nagai, Y. (2014) · International Journal of Energy Research · doi:10.1002/er.3141 · Cited by 462
Shrestha, K. P., Seidel, L., Zeuch, T., & Mauss, F. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01056 · Cited by 441
Kinetic Modeling of the Oxidation of Ammonia in Flames
Miller, J. A., Smooke, M. D., Green, R. M., & Kee, R. J. (1983) · Combustion Science and Technology · doi:10.1080/00102208308923691 · Cited by 426
Halter, F., Chauveau, C., Chaumeix, N., & Gökalp, İ. (2005) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2004.08.195 · Cited by 426
Ammonia oxidation at high pressure and intermediate temperatures
Song, Y., Hashemi, H., Christensen, J. M., Zou, C., Marshall, P., & Glarborg, P. (2016) · Fuel · doi:10.1016/j.fuel.2016.04.100 · Cited by 410
Flammability limits, ignition energy, and flame speeds in H2–CH4–NH3–N2O–O2–N2 mixtures
Pfahl, U. J., Ross, M. C., Shepherd, J. E., Pasamehmetoglu, K. O., & Unal, C. (2000) · Combustion and Flame · doi:10.1016/s0010-2180(00)00152-8 · Cited by 405
The oxidation of hydrogen cyanide and related chemistry
DAGAUT, P., GLARBORG, P., & ALZUETA, M. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2007.02.004 · Cited by 395
Modeling turbulent reacting jets issuing into a hot and diluted coflow
Christo, F. C., & Dally, B. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2005.03.002 · Cited by 386
He, X., Shu, B., Nascimento, D., Moshammer, K., Costa, M., & Fernandes, R. X. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.04.050 · Cited by 370
Studies on properties of laminar premixed hydrogen-added ammonia/air flames for hydrogen production
Lee, J. H., Kim, J. H., Park, J. H., & Kwon, O. C. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.071 · Cited by 360
Burning velocity measurements of nitrogen-containing compounds
Takizawa, K., Takahashi, A., Tokuhashi, K., Kondo, S., & Sekiya, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.11.089 · Cited by 345
Kumar, P., & Meyer, T. R. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.103 · Cited by 314
Ammonia chemistry below 1400 K under fuel-rich conditions in a flow reactor
Skreiberg, Ø., Kilpinen, P., & Glarborg, P. (2004) · Combustion and Flame · doi:10.1016/j.combustflame.2003.12.008 · Cited by 310
Study on premixed combustion characteristics of co-firing ammonia/methane fuels
Xiao, H., Valera-Medina, A., & Bowen, P. J. (2017) · Energy · doi:10.1016/j.energy.2017.08.077 · Cited by 301
da Rocha, R. C., Costa, M., & Bai, X.-S. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.102 · Cited by 295
Effect of Chemistry and Transport Properties on Near-Limit Flames at Microgravity
Ronney, P. D. (1988) · Combustion Science and Technology · doi:10.1080/00102208808947092 · Cited by 258
Detailed Kinetic Modelling of Chemistry and Temperature Effects on Ammonia Oxidation
LINDSTEDT, R. P., LOCKWOOD, F. C., & SELIM, M. A. (1994) · Combustion Science and Technology · doi:10.1080/00102209408935436 · Cited by 256
Shu, B., Vallabhuni, S. K., He, X., Issayev, G., Moshammer, K., Farooq, A., & Fernandes, R. X. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.07.074 · Cited by 234
Modeling of ammonia combustion at low pressure
Duynslaegher, C., Contino, F., Vandooren, J., & Jeanmart, H. (2012) · Combustion and Flame · doi:10.1016/j.combustflame.2012.06.003 · Cited by 229
Numerical study on effect of oxygen content in combustion air on ammonia combustion
Li, J., Huang, H., Kobayashi, N., He, Z., Osaka, Y., & Zeng, T. (2015) · Energy · doi:10.1016/j.energy.2015.10.060 · Cited by 210
Modeling Combustion of Ammonia/Hydrogen Fuel Blends under Gas Turbine Conditions
Xiao, H., Valera-Medina, A., & Bowen, P. J. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00709 · Cited by 207
Model reduction for chemical kinetics: An optimization approach
Petzold, L. R., & Zhu, W. (1999) · AIChE Journal · doi:10.1002/aic.690450418 · Cited by 163
Zakaznov, V. F., Kursheva, L. A., & Fedina, Z. I. (1978) · Combustion Explosion and Shock Waves · doi:10.1007/bf00786097 · Cited by 147
Xiao, H., Valera-Medina, A., Marsh, R., & Bowen, P. J. (2017) · Fuel · doi:10.1016/j.fuel.2017.01.095 · Cited by 137
CO2 emissions and mitigation potential in China’s ammonia industry
Zhou, W., Zhu, B., Li, Q., Ma, T., Hu, S., & Griffy‐Brown, C. (2010) · Energy Policy · doi:10.1016/j.enpol.2010.02.048 · Cited by 123
Zhang, Y., Jiang, X. D., Wei, L., Zhang, J., Tang, C., & Huang, Z. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.09.056 · Cited by 111
A POSSIBLE NEW ROUTE FOR NO FORMATION VIAN2H3
Konnov, A. A., & Ruyck, J. D. (2001) · Combustion Science and Technology · doi:10.1080/00102200108907830 · Cited by 98
Self-citationLiu, S., Zou, C., Song, Y. J., et al. (2019) · Energy · doi:10.1016/j.energy.2019.03.040 · Cited by 96
Shock tube study on ignition delay of hydrogen and evaluation of various kinetic models
Hu, E., Pan, L., Gao, Z., Lu, X., Meng, X., & Huang, Z. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.118 · Cited by 77
Flame Characteristics of CH4/H2 on a Jet-in-Hot-Coflow Burner Diluted by N2, CO2, and H2O
Tu, Y., Liu, H., & Yang, W. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03246 · Cited by 63
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
A review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions
Lhuillier, C., Brequigny, P., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117448 · Cited by 618
Metadata
- Authors
- Li, R., Konnov, A. A., He, G., Qin, F., & Zhang, D.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 257
- Pages
- 116059
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2970579213
- Cited by
- 354
- References
- 48
- FWCI
- 10.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.