The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics
Abstract
Abstract For application of pure plastic pyrolytic oil (PPO) several modifications in the engine is required which rejects the utilization of the existing engines while a blend of conventional fuel and PPO can be used with a slight change in engine without having a high impact on engine performance and hence the blends are preferred over the utilization of PPO as crude oil for diesel engines. In this study, the non-catalytic pyrolysis of mixed plastic waste at a temperature of 450 °C is done to obtain high-grade pyrolytic oil having a composition similar to petroleum fuels such as gasoline and diesel. Physical properties of the PPO were analysed, and the compound analysis was done with GC–MS. Further FTIR of PPO and diesel were analysed and compared. Five different ratios of 10, 20, 30, 40 and 50% PPO with diesel in blends were utilized as a fuel in a diesel engine to determine the engine performance and characteristics. The higher presence of PPO in blend increases the brake thermal efficiency (BTE) and reduces specific fuel consumption (SFC) with an increase in load as reported. The presence of PPO results in high heat release and delayed ignition resulting in high in-cylinder pressure. Further high amount of oxygenated compounds in PPO helps in reducing the emission from the combustion. The utilization of PPO with diesel upto 50% in the blend can be used in diesel engines with a slight increase in emission of CO at higher loads.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of advanced catalysts on tire waste pyrolysis oil
Miandad, R., Barakat, M. A., Rehan, M., Aburiazaiza, A. S., Gardy, J., & Nizami, A. S. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.03.024 · Cited by 92
Cited by
Calero, M., Solís, R. R., Muñoz-Batista, M. J., Pérez, A., Blázquez, G., & Ángeles Martín-Lara, M. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.118569 · Cited by 67
Gunerhan, A., Altuntas, O., & Caliskan, H. (2023) · Energy · doi:10.1016/j.energy.2023.127566 · Cited by 40
Optimisation of Process Parameters to Maximise the Oil Yield from Pyrolysis of Mixed Waste Plastics
Faisal, F., Rasul, M. G., Chowdhury, A. A., & Jahirul, M. I. (2024) · Sustainability · doi:10.3390/su16072619 · Cited by 30
Sambandam, P., T, V. K., Mahalingam, S., S, G., & K, G. (2023) · Environmental Research and Technology · doi:10.35208/ert.1222222 · Cited by 3
Metadata
- Authors
- Singh, R. K., Ruj, B., Sadhukhan, A. K., Gupta, P., & Tigga, V. P.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 262
- Pages
- 116539
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2985429023
- Cited by
- 192
- References
- 1
- FWCI
- 8.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics. https://app.cochat.ai/papers/10.1016/j.fuel.2019.116539
- The paper
- Singh, R. K., Ruj, B., Sadhukhan, A. K., Gupta, P., & Tigga, V. P. (2020). Waste plastic to pyrolytic oil and its utilization in CI engine: Performance analysis and combustion characteristics. Fuel. https://doi.org/10.1016/j.fuel.2019.116539
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.