The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Experimental investigation on laminar burning velocities of ammonia/hydrogen/air mixtures at elevated temperatures
Open accessAbstract
The present study introduces new laminar burning velocity data for ammonia/hydrogen/air mixtures measured by means of the outwardly propagating spherical flame method at atmospheric pressure, for previously unseen unburned gas temperatures ranging from 298 to 473 K, hydrogen fractions ranging from 0 vol% to 60 vol% in the fuel and equivalence ratios in the range [0.8–1.4]. Results show increasing velocities with increasing hydrogen fraction and temperature, with maximum values obtained for rich mixtures near stoichiometry. The new experimental dataset is compared to dedicated laminar burning velocity correlations from the literature and to simulations using detailed kinetic mechanisms. The ammonia/air correlation presents a good agreement with measurements over the whole range of experimental conditions. The ammonia/hydrogen/air correlation captures the effect of the initial temperature satisfactorily for equivalence ratios below 1.3 and hydrogen fractions below 50 vol% in the fuel, but discrepancies are observed in other conditions. The effect of hydrogen addition is reproduced satisfactorily for hydrogen fractions between 20 and 40 vol% in the fuel, but discrepancies are observed for rich mixtures below 20 vol% hydrogen and for all mixtures containing 50 vol% hydrogen and more. An optimization of both correlations is proposed thanks to the experimental data obtained, but only with partial improvement of the ammonia/hydrogen/air correlation. State-of-the-art detailed kinetic reaction mechanisms yield values in close agreement with the present experiments. They could thus be used along with additional experimental data from different techniques to develop more accurate correlations for time-effective laminar burning velocity estimates of NH3/H2/air mixtures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Describing the uncertainties in experimental results
Moffat, R. J. (1988) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(88)90043-x · Cited by 9,860
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Science and technology of ammonia combustion
Kobayashi, H., Hayakawa, A., Somarathne, K. D. K. A., & Okafor, E. C. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.09.029 · Cited by 2,532
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
Ammonia as a Renewable Energy Transportation Media
Giddey, S., Badwal, S. P. S., Munnings, C., & Dolan, M. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02219 · Cited by 893
Using ammonia as a sustainable fuel
Zamfirescu, C., & Dincer, I. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.097 · Cited by 875
Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.05.003 · Cited by 869
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
Otomo, J., Koshi, M., Mitsumori, T., Iwasaki, H., & Yamada, K. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.12.066 · Cited by 837
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
Mei, B., Zhang, X., Ma, S., Cui, M., Guo, H., Cao, Z., & Li, Y. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.08.033 · Cited by 652
An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
Tian, Z., Li, Y., Zhang, L., Glarborg, P., & Qi, F. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.005 · Cited by 635
Ichikawa, A., Hayakawa, A., Kitagawa, Y., Kunkuma Amila Somarathne, K. D., Kudo, T., & Kobayashi, H. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.024 · Cited by 540
Study on using hydrogen and ammonia as fuels: Combustion characteristics and NOxformation
Li, J., Huang, H., Kobayashi, N., He, Z., & Nagai, Y. (2014) · International Journal of Energy Research · doi:10.1002/er.3141 · Cited by 462
Kinetic Modeling of the Oxidation of Ammonia in Flames
Miller, J. A., Smooke, M. D., Green, R. M., & Kee, R. J. (1983) · Combustion Science and Technology · doi:10.1080/00102208308923691 · Cited by 426
Flammability limits, ignition energy, and flame speeds in H2–CH4–NH3–N2O–O2–N2 mixtures
Pfahl, U. J., Ross, M. C., Shepherd, J. E., Pasamehmetoglu, K. O., & Unal, C. (2000) · Combustion and Flame · doi:10.1016/s0010-2180(00)00152-8 · Cited by 405
Nakamura, H., Hasegawa, S., & Tezuka, T. (2017) · Combustion and Flame · doi:10.1016/j.combustflame.2017.06.021 · Cited by 366
Studies on properties of laminar premixed hydrogen-added ammonia/air flames for hydrogen production
Lee, J. H., Kim, J. H., Park, J. H., & Kwon, O. C. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.071 · Cited by 360
Burning velocity measurements of nitrogen-containing compounds
Takizawa, K., Takahashi, A., Tokuhashi, K., Kondo, S., & Sekiya, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.11.089 · Cited by 345
Kumar, P., & Meyer, T. R. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.103 · Cited by 314
da Rocha, R. C., Costa, M., & Bai, X.-S. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.102 · Cited by 295
Mitigation Pathways Compatible with 1.5°C in the Context of Sustainable Development
Rogelj, J., Shindell, D. T., Jiang, K., Fifita, S., Ginzburg, V. A., Handa, C., Kheshgi, H. S., Kobayashi, S., Kriegler, E., Luis Mundaca, T., et al. (2018) · Lund University Publications (Lund University) · Cited by 291
Effect of Chemistry and Transport Properties on Near-Limit Flames at Microgravity
Ronney, P. D. (1988) · Combustion Science and Technology · doi:10.1080/00102208808947092 · Cited by 258
Detailed Kinetic Modelling of Chemistry and Temperature Effects on Ammonia Oxidation
LINDSTEDT, R. P., LOCKWOOD, F. C., & SELIM, M. A. (1994) · Combustion Science and Technology · doi:10.1080/00102209408935436 · Cited by 256
Effects of ammonia substitution on hydrogen/air flame propagation and emissions
Lee, J. H., Lee, S. I., & Kwon, O. C. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.07.104 · Cited by 252
Operating envelope of Haber–Bosch process design for power-to-ammonia
Cheema, I. I., & Krewer, U. (2018) · RSC Advances · doi:10.1039/c8ra06821f · Cited by 195
Zakaznov, V. F., Kursheva, L. A., & Fedina, Z. I. (1978) · Combustion Explosion and Shock Waves · doi:10.1007/bf00786097 · Cited by 147
Goldmann, A., & Dinkelacker, F. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.030 · Cited by 129
Nitrogen‐Based Fuels: A Power‐to‐Fuel‐to‐Power Analysis
Dana, A. G., Elishav, O., Bardow, A., Shter, G. E., & Grader, G. S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201510618 · Cited by 119
Flammability and explosion characteristics of mildly flammable refrigerants
Davis, S. G., Pagliaro, J. L., DeBold, T. F., van Wingerden, M., & van Wingerden, K. (2017) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2017.05.019 · Cited by 61
Tatin, A., Bonin, J., & Robert, M. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00510 · Cited by 49
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Self-citationReview on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions
Lhuillier, C., Brequigny, P., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117448 · Cited by 618
Self-citationWang, S., Wang, Z., Elbaz, A. M., Han, X., He, Y., Costa, M., Konnov, A. A., & Roberts, W. L. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.08.004 · Cited by 342
Metadata
- Authors
- Lhuillier, C., Brequigny, P., Lamoureux, N., Contino, F., & Mounaïm-Rousselle, C.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 263
- Pages
- 116653
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2990254860
- Cited by
- 490
- References
- 32
- FWCI
- 15.01
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.