Activated carbon preparation from pyrolysis char of sewage sludge and its adsorption performance for organic compounds in sewage
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Although sludge pyrolysis has been extensively studied in sludge disposal, it is challenging to utilize sludge pyrolysis products. Here, we report a method for preparing sludge activated carbon (SAC) by activating sludge pyrolysis carbon by zinc chloride. The effect of ZnCl2 concentration, activation temperature and activation time on the activated carbon were investigated. The prepared activated carbons were characterized by thermogravimetric analysis, thermal kinetics analysis, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and N2 adsorption-desorption. The results show that when the ZnCl2 concentration was 8 mol/L with an activation time of 1 h at an activation temperature of 800 °C, the SAC iodine adsorption value and methylene blue adsorption value were 816.27 mg/g and 95.25 mg/g, respectively. The SAC exhibited a high BET surface area (up to 765.88 m2/g). The experimental results for simulated wastewater adsorption by SAC prepared under the above preparation conditions show that at an initial concentration of dimethyl phthalate (DMP) of 30 mg/L, addition amount of SAC of 20 mg, adsorption time of 30 min and temperature of 25 °C, the removal ratio of DMP can reach 87%. According to the data obtained, sludge pyrolysis char is a suitable precursor for activated carbon preparation. The obtained SAC could be used as a low-cost adsorbent with favorable surface properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Abdul, G., Zhu, X., & Chen, B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.074 · Cited by 256
Cited by
Streit, A. F. M., Collazzo, G. C., Druzian, S. P., Verdi, R. S., Foletto, E. L., Oliveira, L. F. S., & Dotto, G. L. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2020.128322 · Cited by 288
Lobato-Peralta, D. R., Okoye, P. U., & Alegre, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235140 · Cited by 266
Tire pyrolysis char: Processes, properties, upgrading and applications
Gao, N., Wang, F., Quan, C., Santamaria, L., Lopez, G., & Williams, P. T. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101022 · Cited by 188
Chen, X., Li, J., Xue, Q., Huang, X., Liu, L., & Poon, C. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120723 · Cited by 137
Andooz, A., Eqbalpour, M., Kowsari, E., Ramakrishna, S., & Ansari Cheshmeh, Z. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136021 · Cited by 119
Metadata
- Authors
- Li, Y.-H., Chang, F.-M., Huang, B., Song, Y.-P., Zhao, H.-Y., & Wang, K.-J.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 266
- Pages
- 117053
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W3003340829
- Cited by
- 138
- References
- 1
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Activated carbon preparation from pyrolysis char of sewage sludge and its adsorption performance for organic compounds in sewage. https://app.cochat.ai/papers/10.1016/j.fuel.2020.117053
- The paper
- Li, Y.-H., Chang, F.-M., Huang, B., Song, Y.-P., Zhao, H.-Y., & Wang, K.-J. (2020). Activated carbon preparation from pyrolysis char of sewage sludge and its adsorption performance for organic compounds in sewage. Fuel. https://doi.org/10.1016/j.fuel.2020.117053
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.