CoChat
Sign Up
Cited by 119

The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.

A comprehensive review on pyrolysis from the circular economy point of view and its environmental and social effects

Andooz, Amirhossein, Eqbalpour, Mohammad, Kowsari, Elaheh, Ramakrishna, Seeram, Ansari Cheshmeh, Zahra·2023·Journal of Cleaner Production
DOI 10.1016/j.jclepro.2023.136021
Open this paper in CoChat — free account

Overview

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2023.136021

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 227

  1. Abomohra, 2021, Microwave vacuum co-pyrolysis of waste plastic and seaweeds for enhanced crude bio-oil recovery: experimental and feasibility study towards industrialization, Renew. Sustain. Energy Rev., 149, 10.1016/j.rser.2021.111335 · DOI
  2. Adeniyi, 2021, Modelling and simulation of banana (Musa spp.) waste pyrolysis for bio-oil production, Biofuels, 12, 879, 10.1080/17597269.2018.1554949 · DOI
  3. Al-Salem, 2020, Valorisation of end of life tyres (ELTs) in a newly developed pyrolysis fixed-bed batch process, Process Saf. Environ. Protect., 138, 167, 10.1016/j.psep.2020.03.020 · DOI
  4. Alcazar-Ruiz, 2021, Fast pyrolysis of agroindustrial wastes blends: hydrocarbon production enhancement, J. Anal. Appl. Pyrol., 157, 10.1016/j.jaap.2021.105242 · DOI
  5. Alcazar-Ruiz, 2022, Gasification versus fast pyrolysis bio-oil production: a life cycle assessment, J. Clean. Prod., 336, 10.1016/j.jclepro.2022.130373 · DOI
  6. Alcazar-Ruiz, 2021, Catalytic effect of alkali and alkaline earth metals on fast pyrolysis pre-treatment of agricultural waste, Biofuels, Bioproducts and Biorefining, 15, 1473, 10.1002/bbb.2253 · DOI
  7. Ali, 2022, Removal of Bromine from the non-metallic fraction in printed circuit board via its Co-pyrolysis with alumina, Waste Manag., 137, 283, 10.1016/j.wasman.2021.11.025 · DOI
  8. Alkhatib, 2015, Effect of heating power on the scrap tires pyrolysis derived oil, J. Anal. Appl. Pyrol., 116, 10, 10.1016/j.jaap.2015.10.014 · DOI
  9. Alsaleh, 2014, Waste tire pyrolysis: influential parameters and product properties, Curr. Sustain./Renew. Energy Rep., 1, 129, 10.1007/s40518-014-0019-0 · DOI
  10. Alvarez, 2015, Fast co-pyrolysis of sewage sludge and lignocellulosic biomass in a conical spouted bed reactor, Fuel, 159, 810, 10.1016/j.fuel.2015.07.039 · DOI
  11. Amulya, 2016, Chapter 19 - building a bio-based economy through waste remediation: innovation towards sustainable future, 497
  12. Andersen, 2007, An introductory note on the environmental economics of the circular economy, Sustain. Sci., 2, 133, 10.1007/s11625-006-0013-6 · DOI · Paper page
  13. Andooz, 2022, A comprehensive review on pyrolysis of E-waste and its sustainability, J. Clean. Prod., 333, 10.1016/j.jclepro.2021.130191 · DOI
  14. Antoniou, 2015, Experimental proof of concept for a sustainable End of Life Tyres pyrolysis with energy and porous materials production, J. Clean. Prod., 101, 323, 10.1016/j.jclepro.2015.03.101 · DOI
  15. Antoniou, 2018, Re-designing a viable ELTs depolymerization in circular economy: pyrolysis prototype demonstration at TRL 7, with energy optimization and carbonaceous materials production, J. Clean. Prod., 174, 74, 10.1016/j.jclepro.2017.10.319 · DOI
  16. Antoniou, 2019, Quality protocol and procedure development to define end-of-waste criteria for tire pyrolysis oil in the framework of circular economy strategy, Waste Manag., 95, 161, 10.1016/j.wasman.2019.05.035 · DOI
  17. Araujo-Morera, 2021, Sustainable mobility: the route of tires through the circular economy model, Waste Manag., 126, 309, 10.1016/j.wasman.2021.03.025 · DOI
  18. Arduini, 2020, Carbon black as an outstanding and affordable nanomaterial for electrochemical (bio)sensor design, Biosens. Bioelectron., 156, 10.1016/j.bios.2020.112033 · DOI
  19. Ayer, 2018, Supplying renewable energy for Canadian cement production: life cycle assessment of bioenergy from forest harvest residues using mobile fast pyrolysis units, J. Clean. Prod., 175, 237, 10.1016/j.jclepro.2017.12.040 · DOI
  20. Barry, 2019, Pyrolysis as an economical and ecological treatment option for municipal sewage sludge, Biomass Bioenergy, 122, 472, 10.1016/j.biombioe.2019.01.041 · DOI
  21. Beloin-Saint-Pierre, 2020, Addressing temporal considerations in life cycle assessment, Sci. Total Environ., 743, 10.1016/j.scitotenv.2020.140700 · DOI
  22. Benallal, 1995, Characterization of pyrolytic light naphtha from vacuum pyrolysis of used tyres comparison with petroleum naphtha, Fuel, 74, 1589, 10.1016/0016-2361(95)00165-2 · DOI
  23. Bergfeldt, 2018, Recovery of phosphorus and other nutrients during pyrolysis of chicken manure, Agriculture, 8, 187, 10.3390/agriculture8120187 · DOI
  24. Bhattacharya, 2016, A review on the susceptor assisted microwave processing of materials, Energy, 97, 306, 10.1016/j.energy.2015.11.034 · DOI
  25. Brassard, 2021, Framework for consequential life cycle assessment of pyrolysis biorefineries: a case study for the conversion of primary forestry residues, Renew. Sustain. Energy Rev., 138, 10.1016/j.rser.2020.110549 · DOI · Paper page
  26. Cáceres, 2015, Insecticidal properties of pyrolysis bio-oil from greenhouse tomato residue biomass, J. Anal. Appl. Pyrol., 112, 333, 10.1016/j.jaap.2015.01.003 · DOI
  27. Campuzano, 2021, On the distillation of waste tire pyrolysis oil: a structural characterization of the derived fractions, Fuel, 290, 10.1016/j.fuel.2020.120041 · DOI
  28. Cardona-Uribe, 2021, Towards the chemical upgrading of the recovered carbon black derived from pyrolysis of end-of-life tires, Sustain. Mater. Technol., 28
  29. Chaabane, 2019, Shifting towards sustainable tourism: organizational and financial scenarios for solid waste management in tourism destinations in Tunisia, Sustainability, 11, 3591, 10.3390/su11133591 · DOI
  30. Chaala, 1999, Vacuum pyrolysis of automobile shredder residues: use of the pyrolytic oil as a modifier for road bitumen, Resour. Conserv. Recycl., 26, 155, 10.1016/S0921-3449(99)00003-8 · DOI
  31. Chandir, 2020, Impact of COVID-19 lockdown on routine immunisation in Karachi, Pakistan, Lancet Global Health, 8, e1118, 10.1016/S2214-109X(20)30290-4 · DOI
  32. Chen, 2014, Pyrolysis technologies for municipal solid waste: a review, Waste Manag., 34, 2466, 10.1016/j.wasman.2014.08.004 · DOI
  33. Chen, 2017, Synergistic effect on thermal behavior and char morphology analysis during co-pyrolysis of paulownia wood blended with different plastics waste, Appl. Therm. Eng., 111, 834, 10.1016/j.applthermaleng.2016.09.155 · DOI
  34. Chen, 2021, Pyrolysis of antibiotic mycelial dreg and characterization of obtained gas, liquid and biochar, J. Hazard Mater., 402, 10.1016/j.jhazmat.2020.123826 · DOI
  35. Cheng, 2020, Slow pyrolysis as a platform for negative emissions technology: an integration of machine learning models, life cycle assessment, and economic analysis, Energy Convers. Manag., 223, 10.1016/j.enconman.2020.113258 · DOI · Paper page
  36. Cherubini, 2018, Uncertainty in LCA case study due to allocation approaches and life cycle impact assessment methods, Int. J. Life Cycle Assess., 23, 2055, 10.1007/s11367-017-1432-6 · DOI
  37. Chhabra, 2021, Techno-economic and life cycle assessment of pyrolysis of unsegregated urban municipal solid waste in India, Ind. Eng. Chem. Res., 60, 1473, 10.1021/acs.iecr.0c04746 · DOI
  38. Dargo, 2014, Recycling of plastic waste into fuels. science publishing, Int. J. Sci. Technol. Soc., 2, 190, 10.11648/j.ijsts.20140206.15 · DOI
  39. De Jong, 2017, Life-cycle analysis of greenhouse gas emissions from renewable jet fuel production, Biotechnol. Biofuels, 10, 1, 10.1186/s13068-017-0739-7 · DOI
  40. Dehghan, 2019, Optimization of microwave-assisted accelerated transesterification of inedible olive oil for biodiesel production, Renew. Energy, 138, 915, 10.1016/j.renene.2019.02.017 · DOI
  41. Devaraj, 2015, Experimental investigation of performance, emission and combustion characteristics of waste plastic pyrolysis oil blended with diethyl ether used as fuel for diesel engine, Energy, 85, 304, 10.1016/j.energy.2015.03.075 · DOI
  42. Dhyani, 2018, A comprehensive review on the pyrolysis of lignocellulosic biomass, Renew. Energy, 129, 695, 10.1016/j.renene.2017.04.035 · DOI
  43. Djandja, 2020, Pyrolysis of municipal sewage sludge for biofuel production: a review, Ind. Eng. Chem. Res., 59, 16939, 10.1021/acs.iecr.0c01546 · DOI
  44. Djandja, 2021, Hydrotreatment of pyrolysis oil from waste tire in tetralin for production of high-quality hydrocarbon rich fuel, Fuel, 285, 10.1016/j.fuel.2020.119185 · DOI
  45. Elsner, 2017, Experimental and economic study of small-scale CHP installation equipped with downdraft gasifier and internal combustion engine, Appl. Energy, 202, 213, 10.1016/j.apenergy.2017.05.148 · DOI
  46. Eskicioglu, 2007, Athermal microwave effects for enhancing digestibility of waste activated sludge, Water Res., 41, 2457, 10.1016/j.watres.2007.03.008 · DOI
  47. Evangelopoulos, 2020, Performance analysis and fate of bromine in a single screw reactor for pyrolysis of waste electrical and electronic equipment (WEEE), Process Saf. Environ. Protect., 143, 313, 10.1016/j.psep.2020.07.006 · DOI
  48. Ezeudu, 2021, Temporal assessment of municipal solid waste management in Nigeria: prospects for circular economy adoption, Rev. Environ. Health, 36, 327, 10.1515/reveh-2020-0084 · DOI
  49. Fadhil, 2017, Production of liquid fuels and activated carbons from fish waste, Fuel, 187, 435, 10.1016/j.fuel.2016.09.064 · DOI
  50. Fahmy, 2020, Biomass pyrolysis: past, present, and future, Environ. Dev. Sustain., 22, 17, 10.1007/s10668-018-0200-5 · DOI
  51. Fan, 2011, Life cycle assessment of electricity generation using fast pyrolysis bio-oil, Renew. Energy, 36, 632, 10.1016/j.renene.2010.06.045 · DOI · Paper page
  52. Feizi, 2020, Environmental remediation in circular economy: end of life tyre magnetic pyrochars for adsorptive removal of pharmaceuticals from aqueous solution, Sci. Total Environ., 739, 10.1016/j.scitotenv.2020.139855 · DOI
  53. Finnveden, 2009, Recent developments in life cycle assessment, J. Environ. Manag., 91, 1, 10.1016/j.jenvman.2009.06.018 · DOI · Paper page
  54. Fonts, 2012, Sewage sludge pyrolysis for liquid production: a review, Renew. Sustain. Energy Rev., 16, 2781, 10.1016/j.rser.2012.02.070 · DOI
  55. Friederici, 2021, Comprehensive chemical description of pyrolysis chars from low-density polyethylene by thermal analysis hyphenated to different mass spectrometric approaches, Energy Fuels, 35, 18185, 10.1021/acs.energyfuels.1c01994 · DOI
  56. Fu, 2017, Combined effects of additives and power levels on microwave drying performance of lignite thin layer, Dry. Technol., 35, 227, 10.1080/07373937.2016.1170029 · DOI
  57. Gao, 2021, Investigation of product distribution from co-pyrolysis of side wall waste tire and off-shore oil sludge, Fuel, 285, 10.1016/j.fuel.2020.119036 · DOI
  58. Gao, 2021, Lifecycle assessment of a non-phase-transition drying pyrolysis and mass conversion technology, Energies, 14, 7394, 10.3390/en14217394 · DOI
  59. Ge, 2020, Vacuum pyrolysis incorporating microwave heating and base mixture modification: an integrated approach to transform biowaste into eco-friendly bioenergy products, Renew. Sustain. Energy Rev., 127, 10.1016/j.rser.2020.109871 · DOI
  60. Geyer, 2017, Production, use, and fate of all plastics ever made, Sci. Adv., 3, 10.1126/sciadv.1700782 · DOI · Paper page
  61. Ghisellini, 2021, Potential energy savings from circular economy scenarios based on construction and agri-food waste in Italy, Energies, 14, 8561, 10.3390/en14248561 · DOI
  62. Ghisellini, 2018, Exploring environmental and economic costs and benefits of a circular economy approach to the construction and demolition sector. A literature review, J. Clean. Prod., 178, 618, 10.1016/j.jclepro.2017.11.207 · DOI · Paper page
  63. Gievers, 2021, Life cycle assessment of sewage sludge pyrolysis: environmental impacts of biochar as carbon sequestrator and nutrient recycler, Detritus, 16, 94, 10.31025/2611-4135/2021.15111 · DOI
  64. Godlewska, 2022, Effect of biomass addition before sewage sludge pyrolysis on the persistence and bioavailability of polycyclic aromatic hydrocarbons in biochar-amended soil, Chem. Eng. J., 429, 10.1016/j.cej.2021.132143 · DOI
  65. Gomez, 2009, Thermal plasma technology for the treatment of wastes: a critical review, J. Hazard Mater., 161, 614, 10.1016/j.jhazmat.2008.04.017 · DOI
  66. Guerrero, 2013, Solid waste management challenges for cities in developing countries, Waste Manag., 33, 220, 10.1016/j.wasman.2012.09.008 · DOI · Paper page
  67. Hameed, 2018, Kinetic and thermodynamic analyses of sugar cane bagasse and sewage sludge Co-pyrolysis process, Energy Fuels, 32, 9551, 10.1021/acs.energyfuels.8b01972 · DOI
  68. Han, 2013, Life cycle analysis of fuel production from fast pyrolysis of biomass, Bioresour. Technol., 133, 421, 10.1016/j.biortech.2013.01.141 · DOI
  69. Heberlein, 2008, Thermal plasma waste treatment, J. Phys. Appl. Phys., 41, 10.1088/0022-3727/41/5/053001 · DOI
  70. Hiloidhari, 2021, Energy-carbon-water footprint of sugarcane bioenergy: a district-level life cycle assessment in the state of Maharashtra, India, Renew. Sustain. Energy Rev., 151, 10.1016/j.rser.2021.111583 · DOI
  71. Hita, 2016, Opportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires, Renew. Sustain. Energy Rev., 56, 745, 10.1016/j.rser.2015.11.081 · DOI
  72. Hosseinzadeh-Bandbafha, 2021, Life cycle assessment of bioenergy product systems: a critical review, e-Prime-Adv. Electr. Eng. Electron. Energy, 1
  73. Hsu, 2012, Life cycle assessment of gasoline and diesel produced via fast pyrolysis and hydroprocessing, Biomass Bioenergy, 45, 41, 10.1016/j.biombioe.2012.05.019 · DOI · Paper page
  74. Huang, 2022, Comparative life-cycle assessment of pyrolysis processes for producing bio-oil, biochar, and activated carbon from sewage sludge, Resour. Conserv. Recycl., 181, 10.1016/j.resconrec.2022.106273 · DOI
  75. Huang, 2007, Treatment of organic waste using thermal plasma pyrolysis technology, Energy Convers. Manag., 48, 1331, 10.1016/j.enconman.2006.08.013 · DOI
  76. Huijbregts, 2008, Ecological footprint accounting in the life cycle assessment of products, Ecol. Econ., 64, 798, 10.1016/j.ecolecon.2007.04.017 · DOI
  77. İlkılıç, 2011, Fuel production from waste vehicle tires by catalytic pyrolysis and its application in a diesel engine, Fuel Process. Technol., 92, 1129, 10.1016/j.fuproc.2011.01.009 · DOI
  78. Irfan, 2019, Solar energy development in Pakistan: barriers and policy recommendations, Sustainability, 11, 1206, 10.3390/su11041206 · DOI
  79. Jain, 2022, Bioenergy and bio-products from bio-waste and its associated modern circular economy: current research trends, challenges, and future outlooks, Fuel, 307, 10.1016/j.fuel.2021.121859 · DOI
  80. Jeswani, 2021, Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery, Sci. Total Environ., 769, 10.1016/j.scitotenv.2020.144483 · DOI
  81. Jiang, 2020, Impact of ball-milling and ionic liquid pretreatments on pyrolysis kinetics and behaviors of crystalline cellulose, Bioresour. Technol., 305, 10.1016/j.biortech.2020.123044 · DOI
  82. Jones, 2021, The application of spent tyre activated carbons as low-cost environmental pollution adsorbents: a technical review, J. Clean. Prod., 312, 10.1016/j.jclepro.2021.127566 · DOI
  83. Kadlimatti, 2019, Bio-oil from microwave assisted pyrolysis of food waste-optimization using response surface methodology, Biomass Bioenergy, 123, 25, 10.1016/j.biombioe.2019.01.014 · DOI
  84. Kajda-Szcześniak, 2022, Comparison of pyrolysis and combustion processes of vinyl floor panels using thermogravimetric analysis (TG-FTIR) in terms of the circular economy, Energies, 15, 1516, 10.3390/en15041516 · DOI
  85. Kalmykova, 2018, Circular economy – from review of theories and practices to development of implementation tools, Resour. Conserv. Recycl., 135, 190, 10.1016/j.resconrec.2017.10.034 · DOI · Paper page
  86. Kidinda Kidinda, 2015, Impact of chicken manure integration with mineral fertilizer on soil nutriments balance and maize (Zea mays) yield: a case study on degraded soil of lubumbashi (DR Congo), Am. J. Plant Nutr. Fertil. Technol., 5, 71, 10.3923/ajpnft.2015.71.78 · DOI
  87. Kim, 2022, Upcycling of cattle manure for simultaneous energy recovery and supercapacitor electrode production, Energy, 258, 10.1016/j.energy.2022.124877 · DOI
  88. Kim, 2022, Energy-efficient thermal waste treatment process with no CO2 emission: a case study of waste tea bag, Energy, 241, 10.1016/j.energy.2021.122876 · DOI
  89. Kim, 2022, Marine waste upcycling—recovery of nylon monomers from fishing net waste using seashell waste-derived catalysts in a CO2-mediated thermocatalytic process, J. Mater. Chem.A, 10, 20024, 10.1039/D2TA02060B · DOI
  90. Kim, 2022, Recovery of lactic acid from biodegradable straw waste through a CO2-assisted thermochemical process, J. CO2 Util., 64, 10.1016/j.jcou.2022.102164 · DOI
  91. Kim, 2020, Pyrolysis for nylon 6 monomer recovery from teabag waste, Polymers, 12, 2695, 10.3390/polym12112695 · DOI
  92. Kim, 2020, The valorization of food waste via pyrolysis, J. Clean. Prod., 259, 10.1016/j.jclepro.2020.120816 · DOI
  93. Koponen, 2018, Quantifying the climate effects of bioenergy–choice of reference system, Renew. Sustain. Energy Rev., 81, 2271, 10.1016/j.rser.2017.05.292 · DOI
  94. Kossyrev, 2012, Carbon black supercapacitors employing thin electrodes, J. Power Sources, 201, 347, 10.1016/j.jpowsour.2011.10.106 · DOI
  95. Koukios, 2018, Targeting sustainable bioeconomy: a new development strategy for Southern European countries. The Manifesto of the European Mezzogiorno, J. Clean. Prod., 172, 3931, 10.1016/j.jclepro.2017.05.020 · DOI
  96. Kraiem, 2017, Production and characterization of bio-oil from the pyrolysis of waste frying oil, Environ. Sci. Pollut. Control Ser., 24, 9951, 10.1007/s11356-016-7704-z · DOI
  97. Kriegler, 2014, The role of technology for achieving climate policy objectives: overview of the EMF 27 study on global technology and climate policy strategies, Climatic Change, 123, 353, 10.1007/s10584-013-0953-7 · DOI
  98. Ktori, 2018, Spent coffee grounds valorization through pyrolysis for energy and materials production in the concept of circular economy, Mater. Today Proc., 5, 27582, 10.1016/j.matpr.2018.09.078 · DOI
  99. Kudo, 2017, Production of levoglucosenone and dihydrolevoglucosenone by catalytic reforming of volatiles from cellulose pyrolysis using supported ionic liquid phase, ACS Sustain. Chem. Eng., 5, 1132, 10.1021/acssuschemeng.6b02463 · DOI
  100. Kudo, 2011, Efficient levoglucosenone production by catalytic pyrolysis of cellulose mixed with ionic liquid, Green Chem., 13, 3306, 10.1039/c1gc15975e · DOI
  101. Kuo, 2018, Pollution characteristics of thermal treatments for elutriated ashes. Part 2: comparison with incineration system and plasma melting system, Aerosol Air Qual. Res., 18, 2695, 10.4209/aaqr.2018.05.0158 · DOI
  102. Kwon, 2021, Synergistic effects of CO2 on complete thermal degradation of plastic waste mixture through a catalytic pyrolysis platform: a case study of disposable diaper, J. Hazard Mater., 419, 10.1016/j.jhazmat.2021.126537 · DOI
  103. Kwon, 2018, Effects of calcium carbonate on pyrolysis of sewage sludge, Energy, 153, 726, 10.1016/j.energy.2018.04.100 · DOI
  104. Landi, 2016, Environmental analysis of different end of life scenarios of tires textile fibers, Procedia Cirp, 48, 508, 10.1016/j.procir.2016.03.141 · DOI
  105. Laturnus, 2007, Organic contaminants from sewage sludge applied to agricultural soils. False alarm regarding possible problems for food safety?(8, Environ. Sci. Pollut. Control Ser., 14, 53, 10.1065/espr2006.12.365 · DOI
  106. Ławińska, 2022, Pyrolysis-based municipal solid waste management in Poland—SWOT analysis, Energies, 15, 510, 10.3390/en15020510 · DOI
  107. Le Quéré, 2012, The global carbon budget 1959–2011, Earth Syst. Sci. Data Discuss., 5, 1107
  108. Lee, 2021, Chemical recycling of plastic waste via thermocatalytic routes, J. Clean. Prod., 321, 10.1016/j.jclepro.2021.128989 · DOI
  109. Lee, 2009, Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes, J. Anal. Appl. Pyrol., 85, 372, 10.1016/j.jaap.2008.11.032 · DOI
  110. Lee, 2012, Effects of the types of zeolites on catalytic upgrading of pyrolysis wax oil, J. Anal. Appl. Pyrol., 94, 209, 10.1016/j.jaap.2011.12.015 · DOI
  111. Lee, 2022, Employment of biogas as pyrolysis medium and chemical feedstock, J. CO2 Util., 57, 10.1016/j.jcou.2021.101877 · DOI
  112. Lehmann, 2021, Biochar in climate change mitigation, Nat. Geosci., 14, 883, 10.1038/s41561-021-00852-8 · DOI · Paper page
  113. Lenton, 2010, The potential for land-based biological CO2 removal to lower future atmospheric CO2 concentration, Carbon Manag., 1, 145
  114. Li, 2022, Pyrolysis of waste surgical masks into liquid fuel and its life-cycle assessment, Bioresour. Technol., 346, 10.1016/j.biortech.2021.126582 · DOI
  115. Li, 2016, Biochar from microwave pyrolysis of biomass: a review, Biomass Bioenergy, 94, 228, 10.1016/j.biombioe.2016.09.010 · DOI
  116. Li, 2020, Activated carbon preparation from pyrolysis char of sewage sludge and its adsorption performance for organic compounds in sewage, Fuel, 266, 10.1016/j.fuel.2020.117053 · DOI
  117. Liang, 2015, Production and characterization of bio-oil and bio-char from pyrolysis of potato peel wastes, Biomass Convers. Biorefinery, 5, 237, 10.1007/s13399-014-0130-x · DOI
  118. Liu, 2018, Effects of municipal sewage sludge on fixation of Cr, Ni, Cu, and Zn during Co-processing of heavy metal-containing waste in cement kilns, J. Wuhan Univ. Technol.-Materials Sci. Ed., 33, 892, 10.1007/s11595-018-1910-0 · DOI
  119. Liu, 2015, Production of solid fuel biochar from waste biomass by low temperature pyrolysis, Fuel, 158, 159, 10.1016/j.fuel.2015.05.032 · DOI
  120. Lomax, 2015, Reframing the policy approach to greenhouse gas removal technologies, Energy Pol., 78, 125, 10.1016/j.enpol.2014.10.002 · DOI
  121. Luo, 2021, Full-scale municipal sludge pyrolysis in China: design fundamentals, environmental and economic assessments, and future perspectives, Sci. Total Environ., 795, 10.1016/j.scitotenv.2021.148832 · DOI
  122. Luttenberger, 2020, Waste management challenges in transition to circular economy–case of Croatia, J. Clean. Prod., 256, 10.1016/j.jclepro.2020.120495 · DOI
  123. Manegdeg, 2022, Financial and socio-economic study of modular pyrolysis facilities as waste-to-energy technology: a case study in metropolitan manila, Philippines, Philipp. J. Sci., 151, 357
  124. Martin-Gamboa, 2020, Life cycle assessment of biomass pellets: a review of methodological choices and results, Renew. Sustain. Energy Rev., 133, 10.1016/j.rser.2020.110278 · DOI
  125. Martínez, 2021, An overview of the end-of-life tires status in some Latin American countries: proposing pyrolysis for a circular economy, Renew. Sustain. Energy Rev., 144, 10.1016/j.rser.2021.111032 · DOI
  126. Martínez, 2021, Chemical recycling of end-of-life tires by intermediate pyrolysis using a twin-auger reactor: validation in a laboratory environment, J. Anal. Appl. Pyrol., 159, 10.1016/j.jaap.2021.105298 · DOI
  127. Martínez, 2020, Waste tire valorization by intermediate pyrolysis using a continuous twin-auger reactor: operational features, Waste Manag., 113, 404, 10.1016/j.wasman.2020.06.019 · DOI
  128. Martínez, 2013, Fuel properties of tire pyrolysis liquid and its blends with diesel fuel, Energy Fuels, 27, 3296, 10.1021/ef400602e · DOI
  129. Martínez, 2013, Waste tyre pyrolysis–A review, Renew. Sustain. Energy Rev., 23, 179, 10.1016/j.rser.2013.02.038 · DOI · Paper page
  130. Martinho, 2022, Using plastic waste in a circular economy approach to improve the properties of bituminous binders, Appl. Sci., 12, 2526, 10.3390/app12052526 · DOI
  131. Mastellone, 2020, Technical description and performance evaluation of different packaging plastic waste management's systems in a circular economy perspective, Sci. Total Environ., 718, 10.1016/j.scitotenv.2020.137233 · DOI
  132. Matrapazi, 2020, Experimental and feasibility study of spent coffee grounds upscaling via pyrolysis towards proposing an eco-social innovation circular economy solution, Sci. Total Environ., 718, 10.1016/j.scitotenv.2020.137316 · DOI
  133. Mehta, 2018, Economic analysis and life cycle impact assessment of municipal solid waste (MSW) disposal: a case study of Mumbai, India, Waste Manag. Res., 36, 1177, 10.1177/0734242X18790354 · DOI
  134. Meng, 2019, A review of phosphorus recovery from different thermal treatment products of sewage sludge, Waste Disposal & Sustain. Energy, 1, 99, 10.1007/s42768-019-00007-x · DOI
  135. Miandad, 2016, Catalytic pyrolysis of plastic waste: a review, Process Saf. Environ. Protect., 102, 822, 10.1016/j.psep.2016.06.022 · DOI
  136. Miranda, 2018, Analysis of the costs and logistics of biodiesel production from used cooking oil in the metropolitan region of Campinas (Brazil), Renew. Sustain. Energy Rev., 88, 373, 10.1016/j.rser.2018.02.028 · DOI
  137. Mlonka-Mędrala, 2021, Pyrolysis of agricultural waste biomass towards production of gas fuel and high-quality char: experimental and numerical investigations, Fuel, 296, 10.1016/j.fuel.2021.120611 · DOI
  138. Mohajerani, 2020, Recycling waste rubber tyres in construction materials and associated environmental considerations: a review, Resour. Conserv. Recycl., 155, 10.1016/j.resconrec.2020.104679 · DOI
  139. Monlau, 2015, New opportunities for agricultural digestate valorization: current situation and perspectives, Energy Environ. Sci., 8, 2600, 10.1039/C5EE01633A · DOI
  140. Moreno Ruiz, 2013, Documentation of changes implemented in ecoinvent Data 3.0, Ecoinvent Rep., 5, 3
  141. Morgano, 2018, Intermediate pyrolysis of agricultural waste: a decentral approach towards circular economy, Chem. Eng., 65
  142. Muench, 2013, A systematic review of bioenergy life cycle assessments, Appl. Energy, 112, 257, 10.1016/j.apenergy.2013.06.001 · DOI
  143. Nah, 2017, International organization for standardization (ISO) 15189, Ann. Lab. Med., 37, 365, 10.3343/alm.2017.37.5.365 · DOI
  144. Nanda, 2021, A technical review of bioenergy and resource recovery from municipal solid waste, J. Hazard Mater., 403, 10.1016/j.jhazmat.2020.123970 · DOI
  145. Neczaj, 2018, Circular economy in wastewater treatment plant–challenges and barriers, Proceedings, 2, 614
  146. Nizami, 2017, Developing waste biorefinery in Makkah: a way forward to convert urban waste into renewable energy, Appl. Energy, 186, 189, 10.1016/j.apenergy.2016.04.116 · DOI
  147. Ogunmakinde, 2019, A review of circular economy development models in China, Germany and Japan, Recycl., 4, 27, 10.3390/recycling4030027 · DOI
  148. Oh, 2017, Strategic CO2 utilization for shifting carbon distribution from pyrolytic oil to syngas in pyrolysis of food waste, J. CO2 Util., 20, 150, 10.1016/j.jcou.2017.05.017 · DOI
  149. Ojha, 2015, Resource recovery via catalytic fast pyrolysis of polystyrene using zeolites, J. Anal. Appl. Pyrol., 113, 349, 10.1016/j.jaap.2015.02.024 · DOI
  150. Okoye, 2021, Manufacturing of carbon black from spent tyre pyrolysis oil – a literature review, J. Clean. Prod., 279, 10.1016/j.jclepro.2020.123336 · DOI
  151. Okoye, 2021, Preparation and characterization of carbon black (CB) using heavy residue fraction of spent tyre pyrolysis oil, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2021.106561 · DOI
  152. Oliveira Neto, 2019, Economic, environmental and social benefits of adoption of pyrolysis process of tires: a feasible and ecofriendly mode to reduce the impacts of scrap tires in Brazil, Sustainability, 11, 2076, 10.3390/su11072076 · DOI
  153. Onay, 2003, Slow, fast and flash pyrolysis of rapeseed, Renew. Energy, 28, 2417, 10.1016/S0960-1481(03)00137-X · DOI
  154. Ongen, 2016, Gasification of biomass and treatment sludge in a fixed bed gasifier, Int. J. Hydrogen Energy, 41, 8146, 10.1016/j.ijhydene.2015.11.159 · DOI
  155. Onyeka Okoye, 2022, An investigation into the preparation of carbon black by partial oxidation of spent tyre pyrolysis oil, Waste Manag., 137, 110, 10.1016/j.wasman.2021.10.027 · DOI
  156. Ouda, 2016, Waste to energy potential: a case study of Saudi Arabia, Renew. Sustain. Energy Rev., 61, 328, 10.1016/j.rser.2016.04.005 · DOI
  157. Özeler, 2006, Life cycle assesment of municipal solid waste management methods: ankara case study, Environ. Int., 32, 405, 10.1016/j.envint.2005.10.002 · DOI
  158. Padmanabhan, 2022, Energy recovery of waste plastics into diesel fuel with ethanol and ethoxy ethyl acetate additives on circular economy strategy, Sci. Rep., 12, 1, 10.1038/s41598-022-09148-2 · DOI
  159. Parku, 2020, Pyrolysis of waste polypropylene plastics for energy recovery: influence of heating rate and vacuum conditions on composition of fuel product, Fuel Process. Technol., 209, 10.1016/j.fuproc.2020.106522 · DOI
  160. Payne, 2019, A circular economy approach to plastic waste, Polym. Degrad. Stabil., 165, 170, 10.1016/j.polymdegradstab.2019.05.014 · DOI · Paper page
  161. Paz-Ferreiro, 2018, Biochar from biosolids pyrolysis: a review, Int. J. Environ. Res. Publ. Health, 15, 956, 10.3390/ijerph15050956 · DOI
  162. Pelucchi, 2015, High-temperature chemistry of HCl and Cl2, Combust. Flame, 162, 2693, 10.1016/j.combustflame.2015.04.002 · DOI
  163. Poskart, 2021, Management of lignocellulosic waste towards energy recovery by pyrolysis in the framework of circular economy strategy, Energies, 14, 5864, 10.3390/en14185864 · DOI
  164. Qasim, 2021, Processing of lignocellulose in ionic liquids: a cleaner and sustainable approach, J. Clean. Prod., 323, 10.1016/j.jclepro.2021.129189 · DOI
  165. Qin, 2021, A novel approach for determining the accurate debromination time in the ball-milling process of nonmetallic particles from waste printed circuit boards by computation, J. Hazard Mater., 410, 10.1016/j.jhazmat.2020.124611 · DOI
  166. Qureshi, 2020, Pyrolysis of plastic waste: opportunities and challenges, J. Anal. Appl. Pyrol., 152, 10.1016/j.jaap.2020.104804 · DOI
  167. Raj, 2013, Optimization of process parameters in flash pyrolysis of waste tyres to liquid and gaseous fuel in a fluidized bed reactor, Energy Convers. Manag., 67, 145, 10.1016/j.enconman.2012.11.012 · DOI
  168. Rajesh Banu, 2021, Lignocellulosic biomass based biorefinery: a successful platform towards circular bioeconomy, Fuel, 302, 10.1016/j.fuel.2021.121086 · DOI
  169. Ringsred, 2021, Life-cycle analysis of drop-in biojet fuel produced from British Columbia forest residues and wood pellets via fast-pyrolysis, Appl. Energy, 287, 10.1016/j.apenergy.2021.116587 · DOI
  170. Rollinson, 2019, ‘Patented blunderings’, efficiency awareness, and self-sustainability claims in the pyrolysis energy from waste sector, Resour. Conserv. Recycl., 141, 233, 10.1016/j.resconrec.2018.10.038 · DOI
  171. Sadef, 2016, Waste-to-energy and recycling value for developing integrated solid waste management plan in Lahore, Energy Sources B Energy Econ. Plann., 11, 569, 10.1080/15567249.2015.1052595 · DOI
  172. Saffarzadeh, 2006, Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW, Waste Manag., 26, 1443, 10.1016/j.wasman.2005.12.005 · DOI
  173. Samal, 2017, Thermal plasma technology: the prospective future in material processing, J. Clean. Prod., 142, 3131, 10.1016/j.jclepro.2016.10.154 · DOI
  174. Sambusiti, 2015, Algae as promising feedstocks for fermentative biohydrogen production according to a biorefinery approach: a comprehensive review, Renew. Sustain. Energy Rev., 44, 20, 10.1016/j.rser.2014.12.013 · DOI · Paper page
  175. Samolada, 2012, Potential application of pyrolysis for the effective valorisation of the end of life tires in Greece, Environ. Dev., 4, 73, 10.1016/j.envdev.2012.08.004 · DOI
  176. Sanito, 2020, Economic and environmental evaluation of flux agents in the vitrification of resin waste: a SWOT analysis, J. Environ. Manag., 270, 10.1016/j.jenvman.2020.110910 · DOI
  177. Sarker, 2011, Waste polyethylene terephthalate (PETE-1) conversioninto liquid fuel, J. Fund. Renew. Energy Appl., 1
  178. Sarker, 2013, Waste plastics mixture of polystyrene and polypropylene into light grade fuel using Fe2O3 catalyst, Int. J. Renew. Energy Technol. Res., 2, 17
  179. Shah, 2022, Conversion of pyrolytic non-condensable gases from polypropylene co-polymer into bamboo-type carbon nanotubes and high-quality oil using biochar as catalyst, J. Environ. Manag., 301, 10.1016/j.jenvman.2021.113791 · DOI · Paper page
  180. Sharuddin, 2016, A review on pyrolysis of plastic wastes, Energy Convers. Manag., 115, 308, 10.1016/j.enconman.2016.02.037 · DOI · Paper page
  181. Smith, 2009, Sewage sludge-based adsorbents: a review of their production, properties and use in water treatment applications, Water Res., 43, 2569, 10.1016/j.watres.2009.02.038 · DOI
  182. Soler, 2018, Pollutant formation in the pyrolysis and combustion of materials combining biomass and e-waste, Sci. Total Environ., 622, 1258, 10.1016/j.scitotenv.2017.12.068 · DOI
  183. Somoza-Tornos, 2020, Realizing the potential high benefits of circular economy in the chemical industry: ethylene monomer recovery via polyethylene pyrolysis, ACS Sustain. Chem. Eng., 8, 3561, 10.1021/acssuschemeng.9b04835 · DOI
  184. Song, 2021, Coupling biochar with anaerobic digestion in a circular economy perspective: a promising way to promote sustainable energy, environment and agriculture development in China, Renew. Sustain. Energy Rev., 144, 10.1016/j.rser.2021.110973 · DOI
  185. Soysa, 2016, Fast pyrolysis characteristics and kinetic study of Ceylon tea waste, Int. J. Hydrogen Energy, 41, 16436, 10.1016/j.ijhydene.2016.04.066 · DOI
  186. Sriningsih, 2014, Fuel production from LDPE plastic waste over natural zeolite supported Ni, Ni-Mo, Co and Co-Mo metals, Procedia Environ. Sci., 20, 215, 10.1016/j.proenv.2014.03.028 · DOI
  187. Steele, 2012, Life-cycle assessment of pyrolysis bio-oil production, For. Prod. J., 62, 326
  188. Suriapparao, 2021, Recovery of renewable carbon resources from the household kitchen waste via char induced microwave pyrolysis, Renew. Energy, 179, 370, 10.1016/j.renene.2021.07.044 · DOI
  189. Syamsiro, 2014, Fuel oil production from municipal plastic wastes in sequential pyrolysis and catalytic reforming reactors, Energy Proc., 47, 180, 10.1016/j.egypro.2014.01.212 · DOI · Paper page
  190. Symeonides, 2019, Tire waste management system in Cyprus in the framework of circular economy strategy, Environ. Sci. Pollut. Control Ser., 26, 35445, 10.1007/s11356-019-05131-z · DOI
  191. Tan, 2015, Energy, economic and environmental (3E) analysis of waste-to-energy (WTE) strategies for municipal solid waste (MSW) management in Malaysia, Energy Convers. Manag., 102, 111, 10.1016/j.enconman.2015.02.010 · DOI
  192. Tang, 2022, Co-pyrolytic performances, mechanisms, gases, oils, and chars of textile dyeing sludge and waste shared bike tires under varying conditions, Chem. Eng. J., 428, 10.1016/j.cej.2021.131053 · DOI
  193. Tang, 2018, Co-pyrolysis characteristics and kinetic analysis of organic food waste and plastic, Bioresour. Technol., 249, 16, 10.1016/j.biortech.2017.09.210 · DOI
  194. Tavoni, 2015, Post-2020 climate agreements in the major economies assessed in the light of global models, Nat. Clim. Change, 5, 119, 10.1038/nclimate2475 · DOI
  195. Tayibi, 2021, Coupling anaerobic digestion and pyrolysis processes for maximizing energy recovery and soil preservation according to the circular economy concept, J. Environ. Manag., 279, 10.1016/j.jenvman.2020.111632 · DOI
  196. Tomić, 2018, The role of energy from waste in circular economy and closing the loop concept – energy analysis approach, Renew. Sustain. Energy Rev., 98, 268, 10.1016/j.rser.2018.09.029 · DOI
  197. Tomić, 2022, Chapter 23 - “Closing two loops”—the importance of energy recovery in the “closing the loop” approach, 433
  198. Toth, 2018, Structure of carbon black continuously produced from biomass pyrolysis oil, Green Chem., 20, 3981, 10.1039/C8GC01539B · DOI
  199. Tran, 2016, Effect of pyrolysis temperatures and times on the adsorption of cadmium onto orange peel derived biochar, Waste Manag. Res., 34, 129, 10.1177/0734242X15615698 · DOI
  200. Ubando, 2019, A comprehensive review of life cycle assessment (LCA) of microalgal and lignocellulosic bioenergy products from thermochemical processes, Bioresour. Technol., 291, 10.1016/j.biortech.2019.121837 · DOI

200 of 227 shown

Cited by

Sorted by citations

Metadata

Authors
Andooz, A., Eqbalpour, M., Kowsari, E., Ramakrishna, S., & Ansari Cheshmeh, Z.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2023-02
Volume
388
Pages
136021
ISSN
0959-6526
DOI
10.1016/j.jclepro.2023.136021
Cited by
119
References
12
Language
en
Licence
Funders
  • National Research Foundation of Singapore
  • Amirkabir University of Technology (A-0009465-01-00)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review