The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Characteristics of fast pyrolysis of biomass in a free fall reactor
Open accessAbstract
Fast pyrolysis of four kinds of biomass (legume straw, tobacco stalk, pine sawdust and apricot stone) was conducted in a free fall reactor. Interest is focused on hydrogen-rich gas production. The experimental results verify the occurrence of the in-situ steam reforming of tar, the steam gasification of char and the water–gas shift reaction with the primary pyrolysis of the biomass at higher heating rate in the free fall reactor. These reactions influence greatly the products' distribution and dry gas compositions in fast pyrolysis, especially at higher temperature. The pyrolysis is mass and heat transfer controlled for biomass particle size of above 0.20 mm but kinetically controlled in the case of particle size smaller than 0.20 mm. Biomass composed of higher cellulose and hemicellulose favors hydrogen-rich gas production in fast pyrolysis than that composed of higher lignin. The pyrolysis characteristics of each type of biomass can be explained according to its chemical compositions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.003 · Cited by 1,154
Pyrolysis kinetics of lignocellulosic materials—three independent reactions model
Orfão, J. J. M., Antunes, F. J. A., & Figueiredo, J. L. (1999) · Fuel · doi:10.1016/s0016-2361(98)00156-2 · Cited by 771
Pyrolysis characteristics of biomass and biomass components
Raveendran, K. (1996) · Fuel · doi:10.1016/0016-2361(96)00030-0 · Cited by 693
Cited by
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
Recent advances in utilization of biochar
Qian, K., Kumar, A., Zhang, H., Bellmer, D., & Huhnke, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.074 · Cited by 915
Self-citationFoong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Biorefineries: Current activities and future developments
Demirbas, A. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.06.035 · Cited by 512
An Overview of Recent Developments in Biomass Pyrolysis Technologies
Uddin, M. N., Techato, K., Taweekun, J., Rahman, M. M., Rasul, M. G., Mahlia, T. M. I., & Ashrafur, S. M. (2018) · Energies · doi:10.3390/en11113115 · Cited by 377
Co-gasification and recent developments on waste-to-energy conversion: A review
Ramos, A., Monteiro, E., Silva, V., & Rouboa, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.025 · Cited by 367
S, R., & P, B. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.041 · Cited by 346
Hernández, J. J., Aranda-Almansa, G., & Bula, A. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.01.018 · Cited by 342
Romero, Y., Richard, F., & Brunet, S. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.05.031 · Cited by 309
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
The slow and fast pyrolysis of cherry seed
Duman, G., Okutucu, C., Ucar, S., Stahl, R., & Yanik, J. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.07.051 · Cited by 294
Lapuerta, M., Hernández, J. J., Pazo, A., & López, J. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.02.001 · Cited by 286
Dai, L., Wang, Y., Liu, Y., Ruan, R., He, C., Yu, Z., Jiang, L., Zeng, Z., & Tian, X. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.02.015 · Cited by 282
Energy requirement for fine grinding of torrefied wood
Repellin, V., Govin, A., Rolland, M., & Guyonnet, R. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.01.039 · Cited by 274
Fu, P., Yi, W., Bai, X., Li, Z., Hu, S., & Xiang, J. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.05.083 · Cited by 265
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260
Bio-methanol as a renewable fuel from waste biomass: Current trends and future perspective
Gautam, P., Neha, Upadhyay, S. N., & Dubey, S. K. (2020) · Fuel · doi:10.1016/j.fuel.2020.117783 · Cited by 260
Ioannidou, O., Zabaniotou, A., Antonakou, E. V., Papazisi, K. M., Lappas, A. A., & Athanassiou, C. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.01.004 · Cited by 170
Bio-oil production from pyrolysis of corncob (Zea mays L.)
Demiral, İ., Eryazıcı, A., & Şensöz, S. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.10.045 · Cited by 152
You, S., Ok, Y. S., Tsang, D. C. W., Kwon, E. E., & Wang, C.-H. (2018) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1518860 · Cited by 149
Effects of pyrolysis conditions and ash formation on gasification rates of biomass char
Strandberg, A., Holmgren, P., Wagner, D. R., Molinder, R., Wiinikka, H., Umeki, K., & Broström, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00688 · Cited by 48
Bong, H. K., Selvarajoo, A., & Arumugasamy, S. K. (2022) · Environmental Monitoring and Assessment · doi:10.1007/s10661-021-09691-x · Cited by 21
Gmar, M., Bouafif, H., Bouslimi, B., Braghiroli, F. L., & Koubaa, A. (2022) · Energies · doi:10.3390/en15145071 · Cited by 8
Metadata
- Authors
- Wei, L., Xu, S., Zhang, L., Zhang, H., Liu, C., Zhu, H., & Liu, S.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2006-10
- Volume
- 87
- Issue
- 10
- Pages
- 863-871
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2007525933
- Cited by
- 202
- References
- 3
- FWCI
- 3.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.