The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Microwave assisted co-pyrolysis of biomasses with polypropylene and polystyrene for high quality bio-oil production
Abstract
In this study, co-pyrolysis of five lignocellulosic biomass residues, viz. groundnut shell (G), bagasse (B), rice husk (RH), Prosopis juliflora (PJF) and mixed wood sawdust (MWSD), with two synthetic plastics, polypropylene (PP) and polystyrene (PS), was conducted to improve the quality of bio-oil. Equal composition of biomass and plastic was pyrolyzed at 450 W microwave power using graphite susceptor, and the yields of bio-oil, char and gas fractions were determined. The bio-oil yields from PS-biomass blends varied in the range of 51–60 wt%, with maximum yield obtained from PS-MWSD, while that from PP-biomass blends were 25–41 wt% with maximum yield obtained from PP-RH. The higher heating value of co-pyrolysis bio-oil was high (38–42 MJ kg−1) as compared to bio-oil obtained from only biomass pyrolysis (20–30 MJ kg−1). Energy yield of co-pyrolysis bio-oil was significantly higher with PS mixtures (73–81%) than PP mixtures (32–62%). Importantly, the bio-oil, char and gas yields, and organic composition of bio-oil were non-additive with respect to that obtained from pyrolysis of the individual feedstocks. The presence of PS boosted the production of aromatic hydrocarbons (48–54 wt%), while PP promoted aliphatic hydrocarbons (19–33 wt%) in co-pyrolysis bio-oil. Specifically, high selectivity towards alkanes in bio-oil was obtained from PP-RH mixture. Co-pyrolysis bio-oil contained less moisture with lower acidity compared to pyrolysis bio-oil. RH-PS and RH-PP mixtures were shown to be the better biomass-plastic combinations from the viewpoint of recovering high energy in bio-oil. The microwave co-pyrolysis process efficiency was also high (63–68%) and promising.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Product Distribution from the Fast Pyrolysis of Hemicellulose
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201000425 · Cited by 463
Cited by
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
A review on alternative fuels in future energy system
Stančin, H., Mikulčić, H., Wang, X., & Duić, N. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109927 · Cited by 475
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Metadata
- Authors
- Suriapparao, D. V., Boruah, B., Raja, D., & Vinu, R.
- Venue
- Fuel Processing Technology
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 175
- Pages
- 64-75
- ISSN
- 0378-3820 (ISSN-L)
- OpenAlex
- W2789869684
- Cited by
- 204
- References
- 4
- FWCI
- 6.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microwave assisted co-pyrolysis of biomasses with polypropylene and polystyrene for high quality bio-oil production. https://app.cochat.ai/papers/10.1016/j.fuproc.2018.02.019
- The paper
- Suriapparao, D. V., Boruah, B., Raja, D., & Vinu, R. (2018). Microwave assisted co-pyrolysis of biomasses with polypropylene and polystyrene for high quality bio-oil production. Fuel Processing Technology. https://doi.org/10.1016/j.fuproc.2018.02.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.